Toyota 2008 Camry Bedienungsanleitung

2000 TOYOTA MOTOR CORPORATION

duced or copied, in whole or in part, without the

written permission of Toyota Motor Corporation.

First Printing: Aug. 30, 2000 01-000830-00

FOREWORD

To assist you in your sales and service activities, this manual explains the main characteristics of the 2001 model

year vehicles, in particular providing a technical explanation of the construction and operation of new mecha-

nisms and new technology used.

CAUTION, NOTICE, REFERENCE and NOTE are used in the following ways:

CAUTION A potentially hazardous situation which could result in injury to people may occur

if instructions on what to do or not do are ignored.

NOTICE Damage to the vehicle or components may occur if instructions on what to do or not

do are ignored.

REFERENCE Explains the theory behind mechanisms and techniques.

NOTE Notes or comments not included under the above 3 titles.

All information contained herein is the most up-to-date at the time of publication. We reserve the right to make

changes without prior notice.

CAMRY - OUTLINE OF NEW FEATURES

CAMRY

172CM01

OUTLINE OF NEW FEATURES

The Camry is a high-quality family sedan with advanced technology and sporty performance. The following

changes are made for the 2001 model year.

1. 5S-FE Engine

The 5S-FE engine that are equipped on the ’00 California specification models, which comply with the U-

LEV (Ultra-Low Emission Vehicle) requirements, have now been provided on the all models.

2. 1MZ-FE Engine

The 1MZ-FE engine that are equipped on the ’00 California specification models, which comply with the

LEV (Low Emission Vehicle) requirements, have now been provided on the all models with the automatic

transaxle.

3. Brake

The size of front brake disc on 5S-FE engine model of CE grade has been changed from usual 255 mm (10.0

in.) for the 14-inch wheel to 275 mm (10.8 in.) for the 15-inch wheel.

4. Seat

A seat heater is established as an option to the driver seat and front passenger seat of the vehicle with leather

seats for Canada, thus improved the heating performance in the cold districts.

5. Internal Trunk Release Handle

An internal trunk release handle is included inside the trunk in case a person inadvertently locks oneself with-

in the trunk and needs to free oneself.

The handle is made of phosphorecent so that it is visible in the trunk for a while even after the trunk has been

closed.

MCV20 L - C E P G K A

12345678

BASIC MODEL CODE

SXV20 : With 5S-FE Engine

SXV23 : With 5S-FNE Engine

MCV20 : With 1MZ-FE Engine

2STEERING WHEEL POSITION

L : Left-Hand Drive

4BODY TYPE

E : 4-Door Sedan

5GEAR SHIFT TYPE

M : 5-Speed Manual, Floor

P : 4-Speed Automatic, Floor

GRADE

D : CE

N:LE

G:XLE

8DESTINATION

A : U.S.A.

K : Canada

3MODEL NAME

A : Camry (TMC*1Made)

C : Camry (TMMK*2Made)

7ENGINE SPECIFICATION

K : DOHC and SFI

C : CNG and DOHC

CAMRY - MODEL CODE & MODEL LINE-UP 3

MODEL CODE

*1: TMC (Toyota Motor Corporation)

*2: TMMK (Toyota Motor Manufacturing Kentucky, Inc.)

MODEL LINE-UP

DES-

BODY

TRANSAXLE

DES-

TINA- ENGINE BODY

TYPE

GRADE 5-Speed Manual 4-Speed Automatic

TION

TYPE

S51 E153 A140E A541E

CE SXV20L-

CEMDKA SXV20L-

CEPDKA

5S-FE LE SXV20L-

A(C)EPNKA

USA

XLE SXV20L-

A(C)EPGKA

U.S.A.

1MZ FE

LE MCV20L-

CEMNKA MCV20L-

A(C)EPNKA

1MZ-FE

4-Door XLE MCV20L-

A(C)EPGKA

5S-FNE

4 Door

Sedan LE SXV23L-

AEPNCA

5S FE

CE SXV20L-

AEMDKK SXV20L-

AEPDKK

Canada

5S-FE LE SXV20L-

AEPNKK

Canada

1MZ FE

CE MCV20L-

AEPDKK

1MZ-FE XLE MCV20L-

AEPGKK

CAMRY - MAJOR TECHNICAL SPECIFICATIONS

1st Gear km /h (mph)

Angle of Approach degrees

Angle of Departure degrees

Item Area

Body Type

Vehicle Grade

Model Code

Overall

Length mm (in.)

Width mm (in.)

Height*1mm (in.)

Wheel Base mm (in.)

Tread Front mm (in.)

Rear mm (in.)

Effective Head Room Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Effective Leg Room

Shoulder Room

Overhang

Min. Running Ground Clearance mm (in.)

Curb Weight

Gross Vehicle Weight

Front kg (lb)

Rear kg (lb)

Total kg (lb)

Front kg (lb)

Rear kg (lb)

Total kg (lb)

Fuel Tank Capacity (US.gal., lmp.gal)

Luggage Compartment Capacity m3(cu.ft.)

Max. Speed km/ h (mph)

Max. Cruising Speed km/ h (mph)

Max. Permissible

Speed

Turning Diameter

(Outside Front)

2nd Gear km/h (mph)

3rd Gear km/ h (mph)

4th Gear km /h (mph)

Wall to Wall m (ft.)

Curb to Curb m (ft.)

Engine Type

Valve Mechanism

Bore x Stroke mm (in.)

Displacement cm3(cu.in.)

Compression Ratio

Carburetor Type

Research Octane No. RON

Max. Output (SAE-NET) kW/rpm (HP@rpm)

Max. Torque (SAE-NET) N.m /rpm (lb-ft@rpm)

Battery Capacity (5HR) Voltage & Amp. hr.

Generator Output Watts

Starter Output kW

Clutch Type

Transaxle Type

Transmission Gear

Ratio

Differential Gear Ratio (Final)

Brake Type

Parking Brake Type

Brake Booster Type and Size in.

Proportioning Valve Type

Suspension Type

Stabilizer Bar

Steering Gear Type

Steering Gear Ratio (Overall)

Power Steering Type

In First

In Second

In Third

In Fourth

In Fifth

In Reverse

Front

Rear

Front

Rear

Front

Rear

Major Dimensions & Vehicle WeightsPerformanceEngine

Engine

Chassis Electrical

U.S.A.

4-Door Sedan

CE XLE

0 to 100 mph sec.

0 to 400 m sec.

Acceleration

Counter Gear Ratio

MAJOR TECHNICAL SPECIFICATIONS

SXV20L-CEMDKA SXV20L-CEPDKA SXV20L-A(C)EPNKA SXV20L-A(C)EPGKA

4790 (188.6) 

1780 (70.1) 1785 (70.3)

1415 (55.7) 

2670 (105.1) 

1545 (60.8) 

1520 (59.8) 

980 (38.6), 950 (37.4)*2

940 (37.0), 914 (36.0)*2

1102 (43.4) 

901 (35.5) 

1427 (56.2) 

1425 (56.1) 

975 (38.4) 

1145 (45.1) 

130 (5.1) 

16

810 (1786) 835 (1841) 865 (1907)*3, 875 (1929)*4870 (1918)*3, 875 (1929)*4

550 (1213) 545 (1202) 540 (1191)*3, 550 (1213)*4545 (1202)*3, 555 (1224)*4

1360 (2999) 1380 (3043) 1405 (3097)*3, 1425 (3142)*41415 (3120)*3, 1430 (3153)*4

965 (2130) 995 (2195) 

845 (1860) 900 (1985) 

1810 (3990) 1895 (4180) 

70 (18.5, 15.4) 

0.399 (14.1) 

180 (112) 

————

52 (32) 69 (43) 

95 (58) 125 (78) 

147 (91) — — —

————

11.5 (37.7) 

11.0 (36.1) 

5S-FE 

16-Valve, DOHC 

87.0 x 91.0 (3.43 x 3.58) 

2164 (132.0) 

9.5 : 1 

SFI 

91 or Higher 

99/5200 (133@5200) 

201/4400 (148@4400) 

12-55, 12-48*5

960 

1.4 

Dry, Single Plate — — —

S51 A140E 

3.538 2.810 

1.960 1.549 

1.250 1.000 

0.945 0.706 

0.731 — — —

3.153 2.296 

— 0.945 

3.944 

Ventilated Disc 

L.T. Drum 

Drum 

Tandem 8” + 9” Tandem 8.5” + 8.5”*3, 8” + 9”*4

Dual-P Valve 

MacPherson Strut 

STD 

Rack and Pinion 

17.4 : 1 

Integral Type 

*1: Unladed Vehicle *4: Produced by TMMK

*2: With Moor Roof *5: Without Cold Area Specification Model

*3: Produced by TMC

CAMRY - MAJOR TECHNICAL SPECIFICATIONS

U.S.A.

4-Door Sedan

Canada

LE XLE CE LE

MCV20L-CEMNKA MCV20L-A(C)EPNKA MCV20L-A(C)EPGKA SXV20L-AEMDKK SXV20L-AEPDKK SXV20L-AEPNKK



1780 (70.1) 1785 (70.3) 1780 (70.1) 

1420 (55.9) 1415 (55.7) 



135 (5.3) 130 (5.1) 



880 (1940) 920 (2028)*3, 920 (2028)*4920 (2028)*3, 925 (2039)*4810 (1786) 830 (1830) 870 (1918)

560 (1234) 1460 (3219)*3, 550 (1213)*4545 (1202)*3, 555 (1224)*4535 (1179) 540 (1191)

1440 (3174) 1460 (3219)*3, 1470 (3241)*41465 (3230)*3, 1480 (3263)*41345 (2965) 1365 (3009) 1410 (3109)

1040 (2290) 965 (2130) 995 (2195)

 845 (1860) 900 (1985)

1940 (4275) 1810 (3990) 1895 (4180)



210 (130) 180 (112) 

——————

57 (35) 70 (43) 52 (32) 69 (43) 

97 (60) 127 (79) 93 (58) 125 (78) 

148 (92) — — 147 (91) — —

——————

11.9 (39.0) 11.5 (37.7) 

11.4 (37.4) 11.0 (36.1) 

1MZ-FE 5S-FE 

24-Valve, DOHC 16-Valve, DOHC 

87.5 x 83.0 (3.44 x 3.27) 87.0 x 91.0 (3.43 x 3.58) 

2995 (182.7) 2164 (1320) 

10.5 : 1 9.5 : 1 



91 or higher 

145/5200 (194@5200) 143/5200 (192@5200) 99/5200 (133@5200) 

283/4400 (209@4400) 281/4400 (207@4400) 201/4400 (148@4400) 

 12-55 



Dry, single Plate — — Dry, Single Plate — —

E153 A541E S51 A140E 

3.230 2.810 3.538 2.810 

1.913 1.549 1.960 1.549 

1.258 1.000 1.250 1.000 

0.918 0.735 0.945 0.706 

0.731 — — 0.731 — —

3.545 2.296 3.153 2.296 

— 0.945 — 0.945 

3.933 3.944 



Solid Disc L.T. Drum 



Tandem 8” + 9” Tandem 8.5” + 8.5”*3, 8” + 9”*4Tandem 8.5” + 8.5” 



CAMRY - MAJOR TECHNICAL SPECIFICATIONS

1st Gear km /h (mph)

Angle of Approach degrees

Angle of Departure degrees

Item Area

Body Type

Vehicle Grade

Model Code

Overall

Length mm (in.)

Width mm (in.)

Height*1mm (in.)

Wheel Base mm (in.)

Tread Front mm (in.)

Rear mm (in.)

Effective Head Room Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Front mm (in.)

Rear mm (in.)

Effective Leg Room

Shoulder Room

Overhang

Min. Running Ground Clearance mm (in.)

Curb Weight

Gross Vehicle Weight

Front kg (lb)

Rear kg (lb)

Total kg (lb)

Front kg (lb)

Rear kg (lb)

Total kg (lb)

Fuel Tank Capacity (US.gal., lmp.gal)

Luggage Compartment Capacity m3(cu.ft.)

Max. Speed km/ h (mph)

Max. Cruising Speed km/ h (mph)

Max. Permissible

Speed

Turning Diameter

(Outside Front)

2nd Gear km/h (mph)

3rd Gear km/ h (mph)

4th Gear km /h (mph)

Wall to Wall m (ft.)

Curb to Curb m (ft.)

Engine Type

Valve Mechanism

Bore x Stroke mm (in.)

Displacement cm3(cu.in.)

Compression Ratio

Carburetor Type

Research Octane No. RON

Max. Output (SAE-NET) kW/rpm (HP@rpm)

Max. Torque (SAE-NET) N.m /rpm (lb-ft@rpm)

Battery Capacity (5HR) Voltage & Amp. hr.

Generator Output Watts

Starter Output kW

Clutch Type

Transaxle Type

Transmission Gear

Ratio

Differential Gear Ratio (Final)

Brake Type

Parking Brake Type

Brake Booster Type and Size in.

Proportioning Valve Type

Suspension Type

Stabilizer Bar

Steering Gear Type

Steering Gear Ratio (Overall)

Power Steering Type

In First

In Second

In Third

In Fourth

In Fifth

In Reverse

Front

Rear

Front

Rear

Front

Rear

Major Dimensions & Vehicle WeightsPerformanceEngine

Engine

Chassis Electrical

Canada

4-Door Sedan

CE LE

0 to 100 km/ h sec.

0 to 400 m sec.

Acceleration

Counter Gear Ratio

XLE

U.S.A.

MCV20L-AEPDKK MCV20L-AEPGKK SXV23L-AEPNCA

4790 (188.6) 

1780 (70.1) 1785 (70.3) 1780 (70.1)

1420 (55.9) 

2670 (105.1) 

1545 (60.8) 

1520 (59.8) 

980 (38.6), 950 (37.4)*2980 (38.6)

940 (37.0), 914 (36.0)*2940 (37.0)

1102 (43.4) 

901 (35.5) 

1427 (56.2) 

1425 (56.1) 

975 (38.4) 

1145 (45.1) 

135 (5.3) 130 (5.1)

1616

860 (1896) 920 (2028) 860 (1896)

540 (1190) 545 (1202) 595 (1312)

1400 (3086) 1465 (3230) 1455 (3208)

1040 (2290) 970 (2140)

900 (1985) 950 (2095)

1940 (4275) 1920 (4235)

70 (18.5, 15.4) 135 (35.7, 29.2)*5, 43 (11.4, 9.5)*6

0.399 (14.1) 0.332 m3*7, 8.921 ft3*8

210 (130) 180 (112)

——

———

70 (43) 66 (41)

127 (79) 119 (74)

———

11.9 (39.0) 

11.4 (37.4) 

1MZ-FE 5S-FNE

24-Valve, DOHC 16-Valve, DOHC

87.5 x 83.0 (3.44 x 3.27) 87.0 x 91.0 (3.43 x 3.58)

2995 (182.7) 2164 (132.0)

10.5 : 1 11.0 : 1

SFI 

91 or higher 130

143/5200 (192@5200) 88/5200 (118@5200)

281/4400 (207@4400) 178/2400 (131@2400)

12-55 

960 

1.4 

———

A541E A140E

2.810 2.810

1.549 1.549

1.000 1.000

0.735 0.706

———

2.296 

0.945

3.933 4.176

Ventilated Disc 

Solid Disc L.T. Drum

Drum 

Tandem 8.5” + 8.5” 

Dual-P Valve 

MacPherson Strut 

STD 

Rack and Pinion 

17.4 : 1 

Integral Type 

*1: Unladed Vehicle *5: Water Volume

*2: With Moon Roof *6: Equivalent Gasoline Capacity

*3: Produced by TMC *7: VDA

*4: Produced by TMMK *8: SAE Suitcase

IN00U–22

N17080

Filler Cap

Float

Reservoir Tank

Grommet

Clip

Slotted Spring Pin

: Specified torque

Non–reusable part

Cylinder

Piston Push Rod

Washer

Snap Ring

Boot

Gasket

Lock Nut

Clevis Pin

Clevis

N·m (kgf·cm, ft·lbf)

12 (120, 9)

15 (155, 11)

–INTRODUCTION HOW TO USE THIS MANUAL IN–1

1Author: Date:

HOW TO USE THIS MANUAL

GENERAL INFORMATION

1. INDEX

An INDEX is provided on the first page of each section to guide you to the item to be repaired. To assist you

in finding your way through the manual, the Section Title and major heading are given at the top of every

page.

2. GENERAL DESCRIPTION

At the beginning of each section, a General Description is given that pertains to all repair operations con-

tained in that section.

Read these precautions before starting any repair task.

3. TROUBLESHOOTING

TROUBLESHOOTING tables are included for each system to help you diagnose the problem and find the

cause. The fundamentals of how to proceed with troubleshooting are described on page IN–21.

Be sure to read this before performing troubleshooting.

4. PREPARATION

Preparation lists the SST (Special Service Tools), recommended tools, equipment, lubricant and SSM (Spe-

cial Service Materials) which should be prepared before beginning the operation and explains the purpose

of each one.

5. REPAIR PROCEDURES

Most repair operations begin with an overview illustration. It identifies the components and shows how the

parts fit together.

Example:

Illustration:

what to do and where

21. CHECK PISTON STROKE OF OVERDRIVE BRAKE

(a)

Task heading : what to do

SST 09350–30020 (09350–06120)

Set part No. Component part No.

Detailed text : how to do task

(b)

Piston stroke: 1.40 1.70 mm (0.0551  0.0669 in.)

Specification

Place SST and a dial indicator onto the overdrive brake pis-

ton as shown in the illustration.

Measure the stroke applying and releasing the compressed

air (392  785 kPa, 4  8 kgf/cm2or 57 114 psi) as shown

in the illustration.

IN–2 –INTRODUCTION HOW TO USE THIS MANUAL

2Author: Date:

The procedures are presented in a step–by–step format:

The illustration shows what to do and where to do it.

The task heading tells what to do.

The detailed text tells how to perform the task and gives other information such as specifications

and warnings.

Example:

This format provides the experienced technician with a FAST TRACK to the information needed. The upper

case task heading can be read at a glance when necessary, and the text below it provides detailed informa-

tion. Important specifications and warnings always stand out in bold type.

6. REFERENCES

References have been kept to a minimum. However, when they are required you are given the page to refer

to.

7. SPECIFICATIONS

Specifications are presented in bold type throughout the text where needed. You never have to leave the

procedure to look up your specifications. They are also found in Service Specifications section, for quick

reference.

8. CAUTIONS, NOTICES, HINTS:

CAUTIONS are presented in bold type, and indicate there is a possibility of injury to you or other

people.

NOTICES are also presented in bold type, and indicate the possibility of damage to the components

being repaired.

HINTS are separated from the text but do not appear in bold. They provide additional information to

help you perform the repair efficiently.

9. SI UNIT

The UNITS given in this manual are primarily expressed according to the SI UNIT (International System of

Unit), and alternately expressed in the metric system and in the English System.

Example:

Torque: 30 N·m (310 kgf·cm, 22 ft·lbf)

IN0CN–03

B01453

B02122

5S–FE engine:

1MZ–FE engine:

–INTRODUCTION IDENTIFICATION INFORMATION IN–3

3Author: Date:

IDENTIFICATION INFORMATION

VEHICLE IDENTIFICATION AND

ENGINE SERIAL NUMBER

1. VEHICLE IDENTIFICATION NUMBER

The vehicle identification number is stamped on the vehicle

identification number plate and the certification label, as shown

in the illustration.

A: Vehicle Identification Number Plate

B: Certification Label

2. ENGINE SERIAL NUMBER

The engine serial number is stamped on the engine block, as

shown in the illustration.

FI1066

IN0CO–04

Z11554

Seal Lock Adhesive

IN–4 –INTRODUCTION REPAIR INSTRUCTIONS

4Author: Date:

REPAIR INSTRUCTIONS

GENERAL INFORMATION

BASIC REPAIR HINT

(a) Use fender, seat and floor covers to keep the vehicle

clean and prevent damage.

(b) During disassembly, keep parts in the appropriate order

to facilitate reassembly.

(1) Before performing electrical work, disconnect the

negative (–) terminal cable from the battery.

(2) If it is necessary to disconnect the battery for in-

spection or repair, first disconnect the negative (–)

terminal cable.

(3) When disconnecting the terminal cable, to prevent

damage to battery terminal, loosen the cable nut

and raise the cable straight up without twisting or

prying it.

(4) Clean the battery terminals and cable ends with a

clean shop rag. Do not scrape them with a file or oth-

er abrasive objects.

(5) Install the cable ends to the battery terminals after

loosening the nut, and tighten the nut after installa-

tion. Do not use a hammer to tap the cable ends

onto the terminals.

(6) Be sure the cover for the positive (+) terminal is

properly in place.

(d) Check hose and wiring connectors to make sure that they

are connected securely and correctly.

(e) Non–reusable parts

(1) Always replace cotter pins, gaskets, O–rings, oil

seals, etc. with new ones.

(2) Non–reusable parts are indicated in the component

illustrations by the ”” symbol.

(f) Precoated parts

Precoated parts are bolts, nuts, etc. that are coated with

a seal lock adhesive at the factory.

(1) If a precoated part is retightened, loosened or

caused to move in any way, it must be recoated with

the specified adhesive.

(2) When reusing precoated parts, clean off the old

adhesive and dry with compressed air. Then apply

the specified seal lock adhesive to the bolt, nut or

threads.

Andere Handbücher für 2008 Camry

Inhaltsverzeichnis

Andere Toyota Automobil Handbücher

Toyota

Toyota 2016 PRIUSC Bedienungsanleitung

Toyota

Toyota AVENSIS 2000 Betriebsanleitung

Toyota

Toyota COROLLA MATRIX 2009 Betriebsanleitung

Toyota

Toyota 2005 ECHO Bedienungsanleitung

Toyota

Toyota RAV4 2001 Bedienungsanleitung

Toyota

Toyota Sienna 2003 Bedienungsanleitung

Toyota

Toyota 2001 Tundra Bedienungsanleitung

Toyota

Toyota Tundra 2003 Bedienungsanleitung

Toyota

Toyota Highlander 2008 Bedienungsanleitung

Toyota

Toyota Tacoma 2011 Bedienungsanleitung

Toyota

Toyota Yaris 2014 Bedienungsanleitung

Toyota

Toyota Sienna 2007 Bedienungsanleitung

Toyota

Toyota AVALON 1999 Bedienungsanleitung

Toyota

Toyota Land Cruiser Station Wagon Bedienungsanleitung

Toyota

Toyota RAV4 2019 Bedienungsanleitung

Toyota

Toyota RAV4 (RHD) - MMC Bedienungsanleitung

Toyota

Toyota 2010 Sienna Bedienungsanleitung

Toyota

Toyota Scion 2005 Bedienungsanleitung

Toyota

Toyota 2008 FJ Cruiser Bedienungsanleitung

Toyota

Toyota All Toyota Models Bedienungsanleitung

Toyota

Toyota COROLLA BROCHURE 2011 Bedienungsanleitung

Toyota

Toyota RAV4 EV 2013 Bedienungsanleitung

Toyota

Toyota Camry Hybrid 2013 Bedienungsanleitung

Toyota

Toyota 2000 4Runner Anleitung zur Verwendung

Beliebte Automobil Handbücher anderer Marken

CITROËN

CITROËN DS4 DSign Bedienungsanleitung

Cadillac

Cadillac CTS 2008 Bedienungsanleitung

Porsche

Porsche Boxster S Bedienungsanleitung

KIAM

KIAM SPORTAGE 2014 Stücklistenhandbuch

GMC

GMC 2013 Terrain Montageanleitung

Lexus

Lexus 2015 CT 200h Bedienungsanleitung

GMC

GMC T-Series 1999 Bedienungsanleitung

Mercury

Mercury 1998 Mystique Bedienungsanleitung

Mercury

Mercury 2007 Mariner Bedienungsanleitung

Mazda

Mazda 2007 Mazdaspeed 3 Leitfaden

Mazda

Mazda 2014 CX-5 Bedienungsanleitung

GMC

GMC Chevrolet Express 2022 Bedienungsanleitung

GMC

GMC 1997 Jimmy Bedienungsanleitung

Chevrolet

Chevrolet 2012 Malibu Bedienungsanleitung

Skoda

Skoda FABIA RS - ANNEXE 118 Bedienungsanleitung

Seat

Seat toledo Bedienungsanleitung

PEUGEOT

PEUGEOT 206 CC Bedienungsanleitung

Cadillac

Cadillac 2010 Escalade Bedienungsanleitung