TP-Link RE210 Bedienungsanleitung

7106505625 REV1.0.1

Quick

Installation

Guide

AC750 WiFi Range Extender

RE210

Two easy setup options:

Option 1: Using WPS (Wi-Fi Protected Setup)

Option 2: Using a Web Browser

OPTION

Using WPS (Wi-Fi Protected Setup)

3Relocate

Keep away from Enjoy!

RE Power

Power

Reset

LED

Smart TV Game Console Desktop

Ethernet Connection

Entertainment Adapter

LEDs

Blinking green: WPS connection is in progress.

Solid green: The extender is connected to the

router and is in a good location.

Solid orange: The extender is connected to the

router, but is too close to the router.

Solid red: The extender is connected to the router,

but is too far away from the router.

O: No active connection.

(RE)

(5GHz)

(2.4GHz)

(Power)

On: The extender is connected to the 2.4GHz

wireless network of your main Router/AP.

O: No connection.

On/O: The extender is on or o.

Blinking: The extender is initializing.

On: The extender is connected to the 5GHz

wireless network of your main Router/AP.

O: No connection.

Plug the extender into an electrical outlet

near your router, and wait until the Power

LED is lit and solid green.

A. Press the WPS button on your router/AP and immediately press the RE button on your extender.

Power On 2Connect

Important: Please use Option 2 if your router does not support WPS.

The RE LED should change

from blinking to a solid state after

about 1 minute, indicating that

WPS connection is successful.

If not, please use Option 2.

B. If you are connecting the extender to a dual-band router, but only 2.4GHz or 5GHz LED

is on, repeat step Ato connect the other band.

For more information about using WPS on your router,

please refer to the router manufacturer's user guide.

A. Plug the extender into an electrical outlet

about halfway between your router and the

Wi-Fi dead zone.

B. Wait about 1 minute until the RE LED is lit

and stay solid.

Ideal Range Extender Placement

Main Network Extended Network

5GHz

2.4GHz

Solid green Solid red Solid orange

Too far away

from the router

Too close to

the router

Good

connection

Choose a location away from Bluetooth devices and

other household electronics, such as cordless phone,

microwave, and baby monitor, etc., to minimize

signal interference.

Both 2.4GHz and 5GHz extended networks share the same SSID (network name) and password as your main network.

The Range extender can be used as a wireless

adapter to connect any Ethernet-enabled device,

such as a Blu-ray player, game console, DVR, or smart

TV, to your wireless network.

First, connect the extender to your Wi-Fi network by

following the instructions in Option 1 or Option 2,

then connect an Ethernet-enabled device to the

extender using an Ethernet cable as shown in the

diagram on the right. Router

Refer to Step 3 of Option 1 to relocate your Range Extender.

Troubleshooting and Support

Both 2.4GHz and 5GHz extended networks share the same Wi-Fi password

as your main network, but may have dierent wireless network names if

you customize the names during the conguration.

Please click Next to set up the Range Extender or click Exit to manually congure the device by yourself.

Main Router/AP Network Status:

Exit

WiFi Network Name_2.4GHz:

WiFi Network Name_5GHz:

Connection Status:

N/A

Disconnected

Choose Region Wireless Settings Review SettingsStart

A. On the Start screen, click Next.B. Choose your region from the Region drop-down

list, and click Next.

Follow the Quick Setup Wizard to manually congure the Range Extender.

4Congure

5Relocate

C. Select your router’s 2.4G wireless network

name (SSID) and click Next. If the SSID is

hidden, select the Set SSID and MAC

manually option.

Signal MAC Channel Security

00-0A-EB-74-06-06 1 WPA-PSK

0C-72-2C-B3-A5-2C 1 WPA-PSK

Available Wireless Networks (2.4GHz): 24

Choose SSID

TP-LINK_2.4GHz_XXX

TP-LINK_XXX

Back

Rescan

√

Choose Region Wireless Settings Review SettingsStart

Set SSID and MAC Manually

TP-LINK_2.4GHz_XXX

00-0A-EB-74-06-06

Most Secure(WPA-PSK/WPA2-PSK)

123456789

Back

TP-LINK_2.4GHz_XXX_EXT

Choose Region Wireless Settings Review Settings

Start

Main Router/AP Network (2.4GHz)

Main Router/AP WiFi Network Name(SSID):

Main Router/AP MAC Address(BSSID):

WiFi Security Option:

Fill in the WiFi Password of your Main

Router/AP:

Range Extender Network (XXGHz)

Range Extender WiFi Network Name(SSID): Copy from Main Router/AP TP-LINK_2.4GHz_XXX

Customize

TP-LINK_5GHz_XXX

00-0A-EB-74-06-06

Most Secure(WPA-PSK/WPA2-PSK)

123456789

Back

TP-LINK_5GHz_XXX_EXT

Choose Region Wireless Settings Review SettingsStart

Main Router/AP Network (5GHz)

Main Router/AP WiFi Network Name(SSID):

Main Router/AP MAC Address(BSSID):

WiFi Security Option:

Fill in the WiFi Password of your Main

Router/AP:

Range Extender Network (XXGHz)

Range Extender WiFi Network Name(SSID): Copy from Main Router/AP TP-LINK_5GHz_XXX

Customize

Wireless Setting

Main Router/AP WiFi Network Name (2.4GHz):

Main Router/AP WiFi Network Name (5GHz):

Range Extender WiFi Network Name (2.4GHz):

WiFi Security Option:

WiFi Password:

Range Extender WiFi Network Name (5GHz):

WiFi Security Option:

WiFi Password:

TP-LINK_2.4GHz_XXX

TP-LINK_5GHz_XXX

TP-LINK_2.4GHz_XXX_EXT

Most Secure (WPA/WPA2-PSK)

123456789

TP-LINK_5GHz_XXX_EXT

Most Secure (WPA/WPA2-PSK)

123456789

Choose Region Wireless Settings Review SettingsStart

Back

Finish

Export Settings

Exit

Choose Region Wireless Settings Review SettingsStart

Region: Please Select Your Region

Please select your own region to prevent illegal usage against the local law.

http://tplinkrepeater.net

admin

Username:

Password:

Cancel

OPTION

Using a Web Browser

2Connect

Disconnect your computer from all wireless

networks. Connect the Range Extender to your

computer via an Ethernet cable.

Wired: Wireless:

Connection are available

Not connected

Wireless Network Connection

Connect automatically Connect

TP-LINK_Extender_XXGHz

√

1Power On

RE Power

Main Network Extended Network

2.4G

Plug the extender into an electrical outlet

near your router, and wait until the Power

LED is lit and solid green.

Disconnect the Ethernet (wired) connection to

your computer. Click the Wi-Fi icon on the

taskbar and connect to the extender's network

(e.g. TP-LINK_Extender_2.4GHz or _5GHz ). No

password is required to connect the rst time.

Launch a web browser and type

http://tplinkrepeater.net in the address eld.

Use admin (all lowercase) for both Username

and Password to log in.

D. Enter the main router’s Wi-Fi password and either

choose Copy from Main Router/AP or

Customize to create a new name for the 2.4GHz

extended network, then click Next.

E. Repeat step Cand Dto extend the 5GHz wireless

network.

F. Verify your Wireless Settings and click Finish.

Both 2.4GHz and 5GHz LEDs should

turn on and stay solid green.

What do I do if I cannot access the

Extender’s web-based interface?

• Make sure your computer is

connected to the extended network.

•Make sure your computer is set to

obtain an IP address automatically.

My router has no WPS button, how do I connect

the Range extender?

Your router does not support WPS, please use Option

2 to set up the extender.

How do I restore the extender to its factory

default settings?

While the extender is plugged into an electrical outlet,

press and hold the Reset button until all the LEDs turn

on momentarily, then release the button.

Why does the RE LED not change to a

solid state after completing Option 2?

• You may have entered the incorrect Wi-Fi

password of your main network during the

conguration. Please log into the Extender's

web-based interface to check the password

and try again.

• If the RE LED still does not change to a

solid state, please reset the extender and go

through the conguration again.

Andere Handbücher für RE210

Andere TP-Link Extender Handbücher

TP-Link

TP-Link RE500X Bedienungsanleitung

TP-Link

TP-Link RE815XE Bedienungsanleitung

TP-Link

TP-Link RE590T Bedienungsanleitung

TP-Link

TP-Link TL-WA850RE Bedienungsanleitung

TP-Link

TP-Link TL-WA854RE Bedienungsanleitung

TP-Link

TP-Link TL-WPA4220 TKIT Bedienungsanleitung

TP-Link

TP-Link TL-WPA2220 Bedienungsanleitung

TP-Link

TP-Link TL-WPA4220 TKIT Bedienungsanleitung

TP-Link

TP-Link TL-WPA281 Bedienungsanleitung

TP-Link

TP-Link TL-WPA4220 TKIT Bedienungsanleitung

TP-Link

TP-Link TL-WA850RE Bedienungsanleitung

TP-Link

TP-Link N300 Bedienungsanleitung

TP-Link

TP-Link TL-WA854RE Bedienungsanleitung

TP-Link

TP-Link AC1750 Bedienungsanleitung

TP-Link

TP-Link AC1900 Bedienungsanleitung

TP-Link

TP-Link TL-WA830RE Bedienungsanleitung

TP-Link

TP-Link TL-WA855RE Bedienungsanleitung

TP-Link

TP-Link RE270K / RE370K Bedienungsanleitung

TP-Link

TP-Link TL-WPA8630P Bedienungsanleitung

TP-Link

TP-Link TL-WA860RE Bedienungsanleitung

TP-Link

TP-Link TL-WA750RE Bedienungsanleitung

TP-Link

TP-Link RE650 Bedienungsanleitung

TP-Link

TP-Link RE230 Bedienungsanleitung

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung