TP-Link TD-8616B Bedienungsanleitung

TD-8616B

ADSL2/2+ Ethernet Modem

Rev: 1.0.1

1910010015

Specifications are subject to change without notice. is a registered trademark of

TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or

registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from TP-LINK

reserved.

http://www.tp-link.com

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in

which case the user may be required to take adequate measures.

Package Contents

The following items should be found in your package:

¾One TD-8616B ADSL2/2+ Ethernet Modem

¾One AC power Adapter for TD-8616B ADSL2/2+ Ethernet Modem

¾Quick Installation Guide

¾One RJ45 cable

¾Two RJ11 cables

¾One ADSL splitter

¾One Resource CD , including:

zThis User Guide

zOther Helpful Information

)Note:

Make sure that the package contains the above items. If any of the listed items are damaged or

missing, please contact with your distributor.

CONTENTS

Chapter 1. Introduction ........................................................................................ 1

1.1 Product Overview ...................................................................................................... 1

1.2 Main Features ........................................................................................................... 1

1.3 Conventions .............................................................................................................. 1

Chapter 2. Hardware Installation ......................................................................... 2

2.1 The Front Panel ........................................................................................................ 2

2.2 The Back Panel......................................................................................................... 2

2.3 Installation Environment ............................................................................................ 3

2.4 Connecting the Modem ............................................................................................. 3

Chapter 3. Quick Installation Guide .................................................................... 5

3.1 Configure PC............................................................................................................. 5

3.2 Login ......................................................................................................................... 8

Chapter 4. Software Configuration.................................................................... 10

4.1 Statistics.................................................................................................................. 10

4.2 Basic Setup ............................................................................................................. 11

4.2.1 WAN Setting...................................................................................................................12

4.2.2 LAN Setting ....................................................................................................................12

4.2.3 ADSL ..............................................................................................................................13

4.3 Maintenance............................................................................................................ 13

4.3.1 Administration.................................................................................................................14

4.3.2 Firmware.........................................................................................................................14

4.3.3 SysRestart......................................................................................................................15

4.3.4 Diagnostic Test...............................................................................................................15

Appendix A: Specification..................................................................................... 17

TD-8616B ADSL2/2+ Ethernet Modem User Guide

Chapter 1. Introduction

Thank you for choosing the TD-8616B ADSL2/2+ Ethernet Modem .

1.1 Product Overview

The device is designed to provide a simple and cost-effective ADSL Internet connection for a

private Ethernet network.

The Modem is easy to use. The TD-8616B connects to an Ethernet LAN or computers via

standard Ethernet ports. The ADSL connection is made using ordinary telephone line with

standard connectors. Multiple workstations can be networked and connected to the Internet using

a single Wide Area Network (WAN) interface and single global IP address.

ADSL

The TD-8616B supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI

specifications. In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports

dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.

1.2 Main Features

¾One 10/100M RJ-45 LAN ports (Auto MDI/MDIX), one RJ11 port

¾Downstream data rates up to 24Mbps, upstream data rates up to 3.5Mbps（With Annex M

enabled）.

¾Supports long transfers, the max line length can reach to 6.5Km.

¾Quick response semi-conductive surge protection circuit, provides reliable ESD and

surge-protect function.

¾High speed and asymmetrical data transmit mode, provides safe and exclusive bandwidth.

¾Supports All ADSL industrial standards.

¾Compatible with all mainstream DSLAM (CO).

¾Real-time Configuration and device monitoring.

¾Supports Multiple PVC (Permanent Virtual Circuit).

¾Supports firmware upgrade and Web management.

1.3 Conventions

The Modem or device mentioned in this User Guide stands for TD-8616B without any

explanations.

Parameters provided in the pictures are just references for setting up the product, which may

differ from the actual situation.

TD-8616B ADSL2/2+ Ethernet Modem User Guide

Chapter 2. Hardware Installation

2.1 The Front Panel

Figure 2-1

The LEDs locate on the front panel, which indicate the device’s working status. For details, please

refer to LED Explanation.

LED Explanation:

Name Status Indication

LAN

Off

Flash

LAN port normal

Connection on LAN port abnormal

Data transmitting or receiving on LAN port

ADSL

Slow flash

Quick flash

Connection to telecom network is abnormal

Connecting to the telecom network

Connection to telecom network is OK

Act

Flash

Off

There is data transmitting or receiving on WAN

port

No data transmitting or receiving on WAN port

Power On

Off

Power OK

Power fail

2.2 The Back Panel

Figure 2-2

¾ON/OFF: The switch for the power.

¾POWER: The Power plug is where you will connect the power adapter.

¾RESET: There are two ways to reset the Modem's factory defaults.

Method one: When the device is working, please press the reset button of the Modem, keep

the reset button pressed down for more than five seconds and then wait for the modem to

reboot.

Method two：Restore the default setting from “Maintenance-SysRestart” of the Modem's

Web-based Utility.

TD-8616B ADSL2/2+ Ethernet Modem User Guide

¾LAN: Through the port, you can connect the Modem to your PC or the other Ethernet network

devices.

¾LINE: Through the port, you can connect the Modem with the telephone.

2.3 Installation Environment

¾The Product should not be located where it will be exposed to moisture or excessive heat.

¾Place the Modem in a location where it can be connected to the various devices as well as to

a power source.

¾Make sure the cables and power cord are placed safely out of the way so they do not create a

tripping hazard.

¾The Modem can be placed on a shelf or desktop.

2.4 Connecting the Modem

Before installing the device, please make sure your broadband service provided by your ISP is

available. If there is any problem, please contact your ISP. You need to connect the device to the

phone jack, the power outlet, and your computer or network. Before cable connection, cut off the

power supply and keep your hands dry. You can follow the steps below to install it.

Step 1: Connect the ADSL Line.

Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on

the rear panel of TD-8616B, and insert the other end into the wall socket.

Method two：You can use a separate splitter. External splitter can divide the data and

voice, and then you can access the Internet and make calls at the same time. The

external splitter has three ports:

•LINE: Connect to the wall jack

•PHONE: Connect to the phone sets

•MODEM: Connect to the ADSL LINE port of TD-8616B

Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel

of TD-8616B. Connect the other end to the MODEM port of the external splitter.

Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the

TD-8616B.

Step 3: Attach the power adapter. Connect the AC power adapter to the POWER connector on

the rear of the device and plug in the adapter to a wall outlet or power extension.

Step 4: Turn on the TD-8616B and power on the computers and LAN devices.

TD-8616B ADSL2/2+ Ethernet Modem User Guide

Figure 2-3

TD-8616B ADSL2/2+ Ethernet Modem User Guide

Chapter 3. Quick Installation Guide

3.1 Configure PC

After you directly connect your PC to the TD-8616B or connect your adapter to a Hub/Switch

which has connected to the Router, you need to configure your PC’s IP address. Follow the steps

below to configure it.

Step 1: Click the Start menu on your desktop, right click My Network Places, and then select

Properties (shown in Figure 3-1).

Figure 3-1

Step 2: Right click Local Area Connection (LAN), and then select Properties.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TP-Link Modem Handbücher

TP-Link

TP-Link TC7650 Bedienungsanleitung

TP-Link

TP-Link TM-EC5658V Bedienungsanleitung

TP-Link

TP-Link td-w8970 Bedienungsanleitung

TP-Link

TP-Link MA260 Bedienungsanleitung

TP-Link

TP-Link TD-W8961N Bedienungsanleitung

TP-Link

TP-Link TD-8610 Bedienungsanleitung

TP-Link

TP-Link Archer T5E Bedienungsanleitung

TP-Link

TP-Link TD-8610 Bedienungsanleitung

TP-Link

TP-Link VX420-G2v Bedienungsanleitung

TP-Link

TP-Link AV500 Bedienungsanleitung

TP-Link

TP-Link TD-8810 V5 Kurzanleitung

TP-Link

TP-Link Archer T600UB Nano Bedienungsanleitung

TP-Link

TP-Link Archer TXE75E Bedienungsanleitung

TP-Link

TP-Link Archer T6E Bedienungsanleitung

TP-Link

TP-Link TC-7620 Bedienungsanleitung

TP-Link

TP-Link TD-8616 Bedienungsanleitung

TP-Link

TP-Link VX230v Bedienungsanleitung

TP-Link

TP-Link Archer VR600 Bedienungsanleitung

TP-Link

TP-Link TC-7610 Bedienungsanleitung

TP-Link

TP-Link Archer TBE550E Bedienungsanleitung

TP-Link

TP-Link M5250 Bedienungsanleitung

TP-Link

TP-Link Archer T4U Bedienungsanleitung

TP-Link

TP-Link TD-VG3511 Bedienungsanleitung

TP-Link

TP-Link TD-W8968 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung