T+A Cala D Bedienungsanleitung

Software Version V 2.1 Bestellnummer / Order No. 9103-0491



USERMANUAL

D

Welcome.

We are delighted that you have decided to purchase a product. With your new you have acquired a top-quality

piece of equipment which has been designed and developed with the wishes of discerning listeners as absolute top

priority.

This system represents our very best efforts at designing practical electronic equipment incorporating solid quality, user-

friendly operation and a specification and performance which leaves nothing to be desired.

All these factors contribute to a piece of equipment which will satisfy your highest demands and your most searching

requirements for a period of many years. All the components we use meet the German and European safety norms and

standards which are currently valid. All the materials we use are subject to painstaking quality monitoring.

At all stages of production we avoid the use of substances which are environmentally unsound or potentially hazardous to

health, such as chlorine-based cleaning agents and CFCs.

We also aim to avoid the use of plastics in general, and PVC in particular, in the design of our products. Instead we rely

upon metals and other non-hazardous materials; metal components are ideal for recycling, and also provide effective

electrical screening.

Our robust all-metal cases exclude any possibility of external sources of interference affecting the quality of reproduction.

From the opposite point of view our products’ electro-magnetic radiation (electro-smog) is reduced to an absolute

minimum by the outstandingly effective screening provided by the metal case.

Our range of accessories includes high-quality cables and connectors

We would like to take this opportunity to thank you for the faith you have shown in our company by purchasing this pro-

duct, and wish you many hours of enjoyment and sheer listening pleasure with your .

elektroakustik GmbH & Co KG



The operation instructions, the connection guidance and the safety notes are for your own good -

please read them carefully and observe them at all times. The operating instructions are an integral

part of this device. If you ever transfer the product to a new owner please be sure to pass them on to

the purchaser to guard against incorrect operation and possible hazards.



All the components we use meet the German and European safety norms and standards which are

currently valid. This product complies with the EU directives 2014/35/EC, 2014/30/EC, 2009/125/EC,

2011/65/EC + 2015/863, 1999/5/EC and 2012/19/EC..

Contents

Operation

Display ..................................................................................................................................................................... 4

Remote Control ...................................................................................................................................................... 6

Basic Functions of the ................................................................................................................................... 9

Source switching ...................................................................................................................................................... 9

Volume control ......................................................................................................................................................... 9

Tone settings (Tone menu) ...................................................................................................................................... 9

Mode of Operation ................................................................................................................................................... 10

System Settings (System Configuration menu) ....................................................................................................... 11

Network Settings ..................................................................................................................................................... 13

Alarm Timer ............................................................................................................................................................. 14

Alarm Timer menu ................................................................................................................................................... 14

Slumber function ..................................................................................................................................................... 16

Operating the source devices in detail

Operating the Radio .............................................................................................................................................. 17

Operating the Streaming Client ........................................................................................................................... 19

Access to Media Content via the Main Menu (Home Menu) ................................................................................... 21

Accessing Media Content using the Favourites List ............................................................................................... 22

Operating the Bluetooth Receiver ....................................................................................................................... 23

Using the system for the first time

Back panel connections .......................................................................................................................................... 26

Installation and wiring .............................................................................................................................................. 28

Safety notes ............................................................................................................................................................ 30

FCC Information to the user .................................................................................................................................... 31

Notes on energy saving .......................................................................................................................................... 32

Network Configuration .......................................................................................................................................... 32

The vTuner Premium Service ............................................................................................................................... 38

Network Terminology .............................................................................................................................................. 40

General

Trouble-shooting ..................................................................................................................................................... 42

Appendix

Wiring diagram ........................................................................................................................................................ 45

Specification ............................................................................................................................................................ 47

About these instructions

All the controls and functions of the which are frequently used are described in the first section of these operating

instructions.

The second part - 'Basic settings, Installation, Using the system for the first time' covers connections and settings which are

very seldom required; they are generally required only when the machine is set up and used for the first time. Here you will also

find a detailed description of the network settings required for connecting the to your home network.

In der Anleitung verwendete Symbole



Caution!

Text passages marked with this symbol contain important information which must be observed if the

machine is to operate safely and without problems.



This symbol marks text passages which provide supplementary notes and background information; they

are intended to help the user understand how to get the best out of the machine.

Audio System

All the functions of the are operated using the FM100 remote control handset. Direct-access buttons are provided for

the essential functions such as source select and track select, whereas less frequently required functions are controlled

by means of menus which are called up using the / button.

Screen

All information relating to machine status, the current music track and list

navigation is displayed on the graphic screen of the . The display is

context-sensitive, and in part varies according to the capabilities and facilities of

the service to which you are currently listening.

The most important information is highlighted on the screen according to

context. Supplementary information is provided by symbols above and below

the main data. The symbols used are listed and explained in the table below.



e.g.

The displays and symbols which appear on the screen vary according to the

currently active function (SCL, Disc, etc.) and the type of music currently being

played.

The basic areas of the screen:

Display field (a) shows the currently active source.

Display field (b) shows information relating to the piece of music being

played. The essential information is displayed enlarged in the main line.

Display field (c) shows information relating to the device and playback.

The bottom line (d) displays supplementary context-sensitive information (e.g.

bitrate, elapsed time, state of reception).



The provides different screen displays for the Streaming Client and the

radio.

Large-format display:

Enlarged display of the most important information, clearly legible even from

a distance

Detail display:

Small-text display showing a large number of additional information points,

e.g. bit-rate etc.

A brief press on the –button on the remote control handset is used to

switch between the display modes.

Screen symbols and their meaning

Making connection (Wait / Busy)

The rotating symbol indicates that the is currently processing a command,

or is attempting to connect to a service. These processes may take some time

to complete depending on the speed of your network and the load upon it.

During such periods the may be muted, and may not respond to the

controls. Please wait until the symbol disappears, then try again.

Indicates a music track which can be played, or a playlist.

Indicates a folder which conceals further folders or lists.

Indicates that a source is being reproduced via a cable connection.

Indicates that a source is being reproduced via a radio connection.

Indicates that the is reproducing a station or playing back a music track.

Pause indicator

Indicates that the speakers are switched off.

Buffer display (fullness indicator, memory display) and data rate indicator (if

available):

The higher the data rate, the better the quality of reproduction.

Display of the elapsed playback time.

This information is not available for all services.

Indicates that the button can be used to switch to a higher menu or

select level.

0 / 0

Position indicator in select lists. The first number shows the current position in

the list, the second number the total number of list entries (length of list).

Indicates that the selected menu point or list point can be activated by pressing

the button.

ABC oder

Display of the symbol input modes

123 oder

abc

Indicates that an alarm time is set and active

Remote Control

The infrared receiver for the remote control handset is located left of the screen

area of the . There must be line of sight contact between the FM100 and the

screen.

The following tables show the remote control buttons and their function when

operating the machine.



(red)

Switches the machine on and off

Direct source select buttons. If the machine is switched off,

pressing one of these buttons turns it on and at the same time

selects the corresponding source device.



Selects the Streaming Client function of the (Internet Radio,

access to music servers).





Selects the analogue A1 IN or the digital D1 IN input. Press the

button repeatedly until the desired input is displayed on the

screen.





Selects the analogue A2 IN or the digital D2 IN / D3 IN input.

Press the button repeatedly until the desired input is displayed on

the screen.





Selects the Radio function of the 



Selects the Bluetooth Receiver function





abc

...



xyz



Direct alpha-numeric input, e.g. track number, quick station

select, radio station.

The buttons and are also assigned special

characters.

During the text input procedure you can use the button

to toggle between numeric and alpha-numeric input, and

between capitals and lowercase letters.



(yellow)

Switches sound on and off (MUTING)

- +

(yellow)

Reduces / increases volume (volume control rocker)



Brief press opens the tone control settings menu:

Balance / Treble / Bass / Subwoofer / Loudness / Sound field

The menu points are called up using the / 

button, and can be altered using the / buttons.

For more information on the tone controls please see the

Chapter 'Tone settings'.



can be controlled by the App 'TA Control' too.

For further information please visit our homepage

www.ta-hifi.com/app



Radio

Streaming Client



Navigation buttons



Return to previous point

During alpha-numeric character input the 

button can be pressed to erase a character.



Confirms the input

Opens a folder

Starts a piece of music

Selects an Internet station



Selects the previous point within a list



Selects the next point within a list



Confirmation button when entering data



Opens a folder

Starts apieceofmusic



Playback functions



Selects the previous station in the favourite list.

Selects the previous track in the playlist





Brief press:

Manual tuning

Long press:

Rewind / fast forward to search for a particular

passage



Selects the next station in the favourite list.

Selects the next piece in the playlist



(REPEAT)

Repeat function

(see Chapter 'Operating the Streaming Client')



(STOP)

Ends playback



(PLAY/

PAUSE)

Select station from Favourites list

Starts playback of titles / or complete folders

(Play function)

During playback: Halts playback (pause) or

resumes playback



Menu functions



Opens the System Configuration menu (e.g. adjusting screen brightness)



Opens the Favourites menu when the Favourites

list is displayed

Brief press:

Switches to main menu (Home)

Long press:

Opens the network configuration menu



Special functions



(red)

Long press:

Removes a favourite from the station list

Long press:

Removes a favourite from the Favourites list

created on the 



(green)

Hinzufügen eines Favoriten zu der Senderliste

Hinzufügen eines Favoriten zu der an der 

erstellten Favoritenliste



(yellow)

Button for toggling between Stereo and Mono

reception

The Stereo setting is indicated constantly by a 

symbol in the screen window.

The Mono setting is indicated constantly by a

symbol in the screen window.



(blue)

During character input:

When pressed (repeatedly): toggles between

numeric and alpha-numeric input, and between

capitals and lower case script.

In lists:

Search function (Alpha Search)



Displays the Favourites list



Memory button for quick station select



Brief press:

Switches between different screen displays

Long press:

Toggles between display of current music track

and list navigation

Brief press:

Switches between different screen displays



Switches the radio text function on and off

Basic Functions of the 

The basic functions of the , described in this chapter are always available, regardless of the selected source.

Source switching

The source buttons are used to select the desired internal source (VHF radio,

Streaming Client) or an external source (A1 IN, A2 IN, D1 IN, D2 IN, D3 IN,

Bluetooth Receiver) for playback.

Once the has switched to the internal sources they can be operated using

the remote control.

Please refer to the following chapters for details of operating the individual

source devices.

Volume control

The volume of the can be adjusted in fine increments using the - +

button. A brief press on one volume button increases or reduces the volume by

one increment. Holding one of the volume buttons pressed in causes the

volume to change continuously.



Continuous listening to programme material at very high volume can result in

permanent loss of hearing. You can avoid subsequent health problems by

avoiding continuous listening at high volume

Tone settings (Tone menu)

The features a range of facilities for adjusting the sound to suit your

personal preferences, the system’s location and your room acoustics. All sound

settings are grouped together in the tone control menu (TONE menu).

The tone control menu is called up using the button.

The features of the tone control menu are explained in detail in the next section.

Adjustment range /

Options:

Explanations:

Balance

-75 ... 0 ... +75

This menu point allows you to alter the balance

between the left and right loud-speakers in

order to compensate for an unfavourable

listening position.

Treble

Bass

-12 ... 0 ... +12

These two menu points are used to alter the

treble and bass settings.

Tone Control

off / on

This menu point can be used to disable (by-

pass) the 's tone controls.

To switch off the tone controls, select the

“OFF” setting. When the tone controls are

switched off, any adjustments you made to the

following menu points “BASS” and “TREBLE”

have no effect.

Loudness

off / on

The features a volume-dependent tone

control (LOUDNESS) which compensates for

the frequency-dependent sensitivity of the

human ear, and therefore of human hearing, at

very low volume levels.

This set-up option is used to switch loudness

on or off.

Sub-woofer

(This menu point only appears if

an external sub-woofer is

switched on in the System

Configuration menu /

Loudspeaker menu.)

-15 ... 0 ... +15

The volume of the sub-woofer can be adjusted

at this point. Adjust the volume of the sub-

woofer to suit the acoustic conditions of the

listening room, and the volume of the other

channels.

Sound

(sound fields)

The following-setup options are intended for adjusting the reproduction of the

to suit the room acoustics.

Normal

Linear, musical tone setting with no

enhancements;

recommended for normally damped listening

rooms.

Dynamic

Linear sound image with good dynamics and

precision

Particularly recommended for rooms with

severe damping, and loudspeakers which tend

to emphasise bass.

Warm

If you prefer a relaxed sound image with

slightly subdued treble, select the sound field

option Warm.

Speech

This option improves speech clarity in spoken

word programmes, documentaries and sports

transmissions.

Cinema

Setting for use with cinema films, offering good

dialogue comprehensibility.

Mode of operation

Stereo /

Virtual Surround

The offers two modes of operation: STEREO and VIRTUAL SURROUND.

In contrast to Stereo mode in Virtual Surround mode it is possible to achieve

surround effects even without the presence of physical rear loudspeakers.

The mode of operation can be changed by the button. The first press

on the button displays the currently selected mode of operation on the

front display. Further button-presses toggle between the modes of operation.

Inhaltsverzeichnis

Andere T+A Stereo-Receiver Handbücher

T+A

T+A R 1260 R Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7250BT Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Pioneer

Pioneer SX-1000TA Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Pioneer

Pioneer SX-838 Bedienungsanleitung