TPM SmartPAC SPC-3201D Bedienungsanleitung

TPM SPC-3000 User Manual

SmartPAC

SPC-3000 User Manual

Version: V2.1 2017Dec01

To properly use the product, read this manual thoroughly is necessary.

Part No.: 81-00SPC300-021

TPM SPC-3000 User Manual

Revision History

Date Revision Description Author

2016/3/30

1.0

Document creation.

Kelvin

2016/8/12 1.1 Revise GPIO signal circuit. Kelvin

2016/11/17 2.0 Document revision. Lyra

2017/12/01 2.1 Add SPE-L121D-2PAand SPE-C116D description Kelvin

TPM SPC-3000 User Manual

The product, including the product itself, the accessories, the software, the manual and the software

description in it, without the permission of TPM Inc. (“TPM”), is not allowed to be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except

the documentation kept by the purchaser for backup purposes.

The names of products and corporations appearing in this manual may or may not be registered trademarks,

and may or may not have copyrights of their respective companies. These names should be used only for

identification or explanation, and to the owners’benefit, should not be infringed without any intention.

The product’s name and version number are both printed on the product itself. Released manual visions for

each product design are represented by the digit before and after the period of the manual vision number.

Manual updates are represented by the third digit in the manual vision number.

Trademark

MS-DOSand Windows 95/98/NT/2000/XP, Visual Studio, Visual C++, Visual BASIC are registered

trademarks of Microsoft.

BCB (Borland C++ Builder) is registered trademark of Borland.

Other product names mentioned herein are used for identification purposes only and may be trademarks

and/or registered trademarks of their respective companies.

TPM SPC-3000 User Manual

Electrical safely

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before

relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the devices

are unplugged before the signal cables are connected. Disconnect all power cables from the existing

system before you add a device.

Before connecting or removing signal cables from motherboard, ensure that all power cables are

unplugged.

Seek professional assistance before using an adapter or extension card. These devices could interrupt

the grounding circuit.

Make sure that your power supply is set to the voltage available in your area.

If the power supply is broken, contact a qualified service technician or your retailer.

Operational safely

Please carefully read all the manuals that came with the package, before installing the new device.

Before use ensure all cables are correctly connected and the power cables are not damaged. If you

detect and damage, contact the dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and

circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may

become wet.

If you encounter technical problems with the product, contact a qualified service technician or the

dealer.

TPM SPC-3000 User Manual

Contents

CONTENTS .................................................................................................................................................................................. 5

1. SPC-3000 INTRODUCTION ....................................................................................................................................................... 8

1.1. INTRODUCTION ............................................................................................................................................................................ 8

1.1.1. Architecture............................................................................................................................................................ 8

1.1.1. Mechanical Dimension .......................................................................................................................................... 9

1.2. FEATURES.................................................................................................................................................................................. 11

1.2.1. Fan-less Design.................................................................................................................................................... 11

1.2.2. Flexible Extension ............................................................................................................................................... 12

1.2.3. High Security....................................................................................................................................................... 13

2. CPU BOARD .......................................................................................................................................................................... 14

2.1. BLOCK DIAGRAM........................................................................................................................................................................ 14

2.2. BOARD LAYOUT .......................................................................................................................................................................... 15

2.3. EXTERNAL I/O CONNECTORS ........................................................................................................................................................ 16

2.4. COM 1/2 SERIAL PORT .............................................................................................................................................................. 17

2.5. USB3 PORT .............................................................................................................................................................................. 18

2.6. LAN PORT ................................................................................................................................................................................ 19

2.7. DVI-I PORT ............................................................................................................................................................................... 20

2.8. MEMORY .................................................................................................................................................................................. 22

2.9. SUMIT-ITA .............................................................................................................................................................................. 22

3. SPC-3201D WITH SPC-C114D ................................................................................................................................................ 23

3.1. SPECIFICATIONS.......................................................................................................................................................................... 23

3.2. INTRODUCTION .......................................................................................................................................................................... 24

3.3. SPE-C114D BOARD LAYOUT........................................................................................................................................................ 25

3.4. POWER CONNECTOR ................................................................................................................................................................... 25

3.4.1. DC24V Input........................................................................................................................................................ 26

3.4.2. ON/OFF Switch ................................................................................................................................................... 26

3.5. ISOLATED 8DI/8DO ................................................................................................................................................................... 27

3.6. EXTERNAL I/O CONNECTORS ........................................................................................................................................................ 29

3.6.1. LED Indicator...................................................................................................................................................... 29

3.6.2. COM 3/4 and 5/6 Serial Port................................................................................................................................ 30

3.6.3. USB3 Port............................................................................................................................................................ 31

3.6.4. miniPCIe.............................................................................................................................................................. 32

4. SPC-3204D WITH SPC-C116D ................................................................................................................................................ 33

4.1. SPECIFICATIONS.......................................................................................................................................................................... 33

4.2. INTRODUCTION .......................................................................................................................................................................... 34

4.3. SPE-C116D BOARD LAYOUT........................................................................................................................................................ 35

TPM SPC-3000 User Manual

4.4. POWER CONNECTOR ................................................................................................................................................................... 35

4.4.1. DC24V Input........................................................................................................................................................ 36

4.4.2. ON/OFF Switch ................................................................................................................................................... 36

4.5. ISOLATED 8DI/8DO ................................................................................................................................................................... 37

4.6. EXTERNAL I/O CONNECTORS ........................................................................................................................................................ 39

4.6.1. LED Indicator...................................................................................................................................................... 40

4.6.2. COM 3/4 and 5/6 Serial Port................................................................................................................................ 41

4.6.1. COM 7/8.............................................................................................................................................................. 42

4.6.2. USB2 Port............................................................................................................................................................ 43

4.6.3. USB3 Port............................................................................................................................................................ 44

5. SPC-3221 WITH SPC-L122D-CSM ........................................................................................................................................... 45

5.1. SPECIFICATIONS.......................................................................................................................................................................... 45

5.2. INTRODUCTION .......................................................................................................................................................................... 46

5.3. SPE-L122D-CSM BOARD LAYOUT................................................................................................................................................ 47

5.4. POWER CONNECTOR ................................................................................................................................................................... 47

5.4.1. DC24V Input........................................................................................................................................................ 48

5.4.2. ON/OFF Switch ................................................................................................................................................... 48

5.5. CN1 ISOLATED 8DI/8DO ............................................................................................................................................................ 49

5.6. EXTERNAL I/O CONNECTORS ........................................................................................................................................................ 51

5.6.1. LED Indicator...................................................................................................................................................... 52

5.6.2. USB3 Port............................................................................................................................................................ 53

5.6.3. COM 3/4 and 5/6 Serial Port................................................................................................................................ 54

5.6.4. Mnet Motionnet Rings......................................................................................................................................... 55

5.7. MOTIONNET.............................................................................................................................................................................. 56

6. SPC-3212 WITH SPC-L121D-2PA ............................................................................................................................................ 57

6.1. SPECIFICATIONS.......................................................................................................................................................................... 57

6.2. INTRODUCTION .......................................................................................................................................................................... 58

6.3. SPE-L121D-2PA BOARD LAYOUT ................................................................................................................................................. 59

6.4. POWER CONNECTOR ................................................................................................................................................................... 59

6.4.1. DC24V Input........................................................................................................................................................ 60

6.4.2. ON/OFF Switch................................................................................................................................................... 60

6.5. ADVANCED DIGITAL I/O............................................................................................................................................................... 61

6.6. EXTERNAL I/O CONNECTORS ........................................................................................................................................................ 64

6.6.1. LED Indicator...................................................................................................................................................... 65

6.6.2. USB3 Port............................................................................................................................................................ 66

6.6.3. USB2 Port............................................................................................................................................................ 67

6.6.4. Mnet Motionnet Ring........................................................................................................................................... 68

6.6.5. PoE Power Ethernet............................................................................................................................................. 69

6.6.6. CN2 Analog Output ............................................................................................................................................. 70

TPM SPC-3000 User Manual

6.7. MOTIONNET.............................................................................................................................................................................. 71

7. APPENDIX A: TPM899 BIOS SETUP........................................................................................................................................ 72

7.1. MAIN MENU ............................................................................................................................................................................. 72

7.2. SELECT SERIAL PORT 2TRANSMISSION PROTOCOL ............................................................................................................................ 73

7.3. SIO POWER FAILURE................................................................................................................................................................... 74

8. APPENDIX B: EEPROM .......................................................................................................................................................... 75

9. APPENDIX C: PIN DEFINITION OF SUMIT-ITA ......................................................................................................................... 76

10. APPENDIX D: INTERNAL USB DONGLE INSTALLATION.......................................................................................................... 77

11. APPENDIX E: CABLE FOR COM PORT ................................................................................................................................... 79

11.1. YCABLE FOR COM 1/2 ............................................................................................................................................................ 79

11.2. Y-CABLE FOR COM 3/4 AND 5/6 (OPTION) ................................................................................................................................. 81

12. APPENDIX F: MOTIONNET UTILITY - MYLINK....................................................................................................................... 83

12.1. LOGIN OF MYLINK .................................................................................................................................................................... 84