Trail Tech Vector Bedienungsanleitung
Quick-start
3
Normal Mode:
= Activate backlight manually
= Switch between screens in normal mode
= Start or stop the stop watch
Data Setting Mode:
= Enter data setting mode
= Switch between screens in data setting mode
= Scroll through current data setting
= Move to next digit of current data setting
Data Reset:
= Reset single-ride data
Adjustable Trip Distance Edit:
= Enter/exit adjustable trip distance edit mode
= Scroll distance value
Rally Mode:
= Enter/exit rally mode
= Scroll distance value
Lap Timer Mode:
= Enter/exit lap timer mode
= Clear lap timer data
= Start/stop lap timer
= Signal new lap
= Enter/exit lap data review mode
= Scroll through lap information
Trail Tech powersport computers bring functionality and life to your
motor vehicle with high quality and innovation. To ensure you enjoy
years of trouble-free operation, this user’s manual contains valuable
information about how to operate and maintain your computer properly.
Please read this manual carefully.
A Note to You
Whenever you call to request service for Vector, you need to know
the date of purchase, dealer’s name, address, and telephone number.
PURCHASE DATE
DEALER NAME
DEALER ADDRESS
DEALER PHONE
Keep this book and sales slip together for future reference.
4
Thanks for Buying a Trail Tech
Powersport Computer:
Please Record Important Information:
5
Precautions
When using Vector, follow basic
precautions, including the
following:
• Read all instructions before
using Vector.
• When installing radiator hose
insert temperature sensors,
make sure the sensor will fit
BEFORE cutting the radiator
hose.
• Use Vector only for its intended
function.
• To reduce the risk of injury, do
not disassemble Vector or its
accessories.
• Vector can be used in the rain
but should not be used
underwater.
• Do not leave the main unit in
direct sunlight when not riding.
• Check relative positions and
gap between speed sensor and
magnet periodically.
• Do not bend, twist, kink or
otherwise abuse the sensor
cables. A damaged cable may
produce incorrect readings.
• When installing Vector, turn
the vehicle ignition off: the wires
carry power from the vehicles
ignition system.
• Avoid contact with gasoline,
degreasers or other chemical
cleaners as they may damage
Vector.
WARNING:
REMEMBER TO PAY ATTENTION
TO THE TRAIL WHILE RIDING.
6
Specifications
FUNCTION
CURRENT SPEED
AVERAGE SPEED
MAXIMUM SPEED
DISTANCE
STOP WATCH
ODOMETER
RIDE TIME
ACCUM. RIDE TIME
TEMPERATURE
12H or 24H CLOCK
LOW BATTERY
TIRE SIZE
OIL REMINDER
MAINTENANCE
LAP TIMER
DISPLAY
SPD
AS
MS
DST
TT
ODO
RT
ART
°C or °F
00:00:00
LO
RANGE
4 - 399.9 KM/H or M/H
4 - 399.9 KM/H or M/H
4 - 399.9 KM/H or M/H
0.00 - 9999.99 KM or M
0 - 9999 hour 59 min
0.0 - 999999 KM or M
0 - 999 hour 59 min
0 - 9999 hour 59 min
0 - 399°
12:59:59 or 23:59:59
About 1 Year Life
0 - 3999 mm
0 -9999 KM or M
0 -9999 KM or M
0-18 Hours/Lap, 29 Laps
SPEED/DISTANCE SENSOR
TEMPERATURE SENSORS
PRODUCT DIMENSIONS
SCREEN DIMENSIONS
Non-contact Magnetic Speed Sensor
Ambient and Engine Temp. Sensors
106.93x59.46x23.7mm WxHxD
(4.21x2.34x0.93” WxHxD)
78.75 x 28.6mm WXH
(3.1 x 1.13” WxH)
7
Specifications
UNITS
KM/H or M/H
KM/H or M/H
KM/H or M/H
KM/H or M/H
Hours:Minutes
KM or M
Hours:Minutes
Hours:Minutes
°C or °F
H:M:S
2.5 Volts
KM or M
KM or M
KM or M
INCREMENTS
0.1 KM/H or M/H
0.1 KM/H or M/H
0.1 KM/H or M/H
0.1 KM/H or M/H
1 Second
1 KM or M
1 Minute
1 Minute
1 Degree
1 KM or M
1 KM or M
1 Second
ACCURACY
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
+/- 0.1%
PRODUCT WEIGHT
WHEEL CIRCUMFERENCE
OPERATION TEMPERATURE
STORAGE TEMPERATURE
BATTERY
EXTERNAL POWER INPUT
3.9 oz. (110 grams) (0.24 lbs.)
0 to 3999 mm
0°C to 60°C (32°F to 140°F)
-20°C to 80°C (-4°F to 176°F)
3V CR2032 (About 1 Year life)
9.0-400 VAC/VDC
(No polarity requirements.)
Main Computer:
LED’s:
Remote Switch:
•
•
•
•
•
The Vector computer has 3 buttons, 2 LED’s and an LCD screen.
Amber LED:
Red LED:
The remote switch (optional, sold separately) is required to
access lap timer and rally mode extended feature sets.
If not in lap timer or rally mode, the remote switch buttons function
as duplicates of the buttons on the main computer.
Overview
8
Vector Computer:
LEFT BUTTON CENTER BUTTON RIGHT BUTTON
RED LEDAMBER LED
Lights up for temperature warning alert and
indicates fast laps in lap timer mode.
Lights up for over-temperature alert and
indicates slow laps in lap timer mode.
TOP
BUTTON
REMOTE
SWITCH
MIDDLE
BUTTON
BOTTOM
BUTTON
LCD
SCREEN
Parts & Features
9
TO ACTIVATE BACKLIGHT MANUALLY, PRESS
Backlight:
Vector is equipped with a backlight for easy viewing during night-time
operation.
Using External 12V Power:
•
•
•
Using Internal Battery Only:
•
•
•
•
Vector will light up with all five LED’s.
Vector will remain lit as long as it senses wheel movement. After
20 minutes of inactivity Vector shuts off the backlight. Press any
button, roll the wheels, or start the motor power and Vector will light
up again.
Shift and temperature LED’s will be enabled.
Vector will only stay lit for 3 seconds.
Vector’s backlight will light up with 10% power to conserve the
internal battery’s power.
If the LO symbol is present, the backlight will not turn on. The LO
symbol appears when battery voltage drops below 2.45V.
If ambient temperature is cold (below -5°C) the backlight will not
turn on.
10
Parts & Features
Use of the Reset Button will erase data for the current ride including
clock and trip distance.
Vector has an internal 3.0V watch type battery (#CR2032). The
computer can be run from the internal battery without being connected
to a vehicle power source.
To change the battery, unscrew the battery cap on the back of the
computer with a coin. Make sure the positive side of the battery
is facing up when replaced.
REPLACE WITH BATTERY MODEL NUMBER #CR2032
Reset Button:
Internal Battery:
BATTERY
RESET
BUTTON
MOUNTING
HOLES
•
•
•
Inhaltsverzeichnis
