TrailMaster MINI XRX Bedienungsanleitung
TrailMaster MINI XRX
Set up instruction
Version: 2.0
2011/11/28
This set up instruction guides our customer to set up the go kart TrailMaster MINI XRX step
by step to ensure a correct assembly for safe driving.
MINI XRX Set up instruction
2
1. Check the components after opening the box.
1.1 Battery (pic. 1): type 12N9-BS (12V9Ah), includes one battery, one
battery liquid, two bolts and nuts for installation.
Pic.1
1.2 One sport steering wheel (pic.2)
Pic.2
1.3.1 one standard parts package, one manual, one flag, one battery cover,
one battery strap, one battery lower cushion, four hub coves, plastic
fixing bolt and nut for flag, 5 cable bundles and one steering bolt cover
(pic.3)
MINI XRX Set up instruction
3
Pic.3
1.3.2 In the standard parts package: 14 bolts M8x45, 2 cotter pins 3X40,
2 cotter pins 2.5X25, 2 castle nuts, 20 R-washers, 6 self-locking nuts M8,
4 M8x35 bolts, 1 M6x30 bolt, 1 M6x12 bolt, 1 M6x16 bolt and 2
self-locking nuts M6 (pic.4)
Pic.4
1.4 1 set of sport seats (Pic.5)
Pic.5
MINI XRX Set up instruction
4
1.5 Two bar cages (pic. 6)
Pic.6
1.6 One top cross bar (Pic.7)
Pic.7
1.7 Two side bars for left and right side with tube seats (Pic. 8)
Pic.8
MINI XRX Set up instruction
5
1.8 One top cross bar with tube seats (Pic.9)
Pic.9
1.9 front wheels left and right; rear wheels left and right (pic.10)
Pic.10
1.10 1 stand exhaust guard and bracket (Pic.11)
Pic.11
2. Assembly
2.1 Assemble the rear shocks (pic.12): take down the bolts from the
shocks, lift the rear swing arm to let the top of shock into the fixing seats
MINI XRX Set up instruction
6
of frame, use 22-29NM torque to fix the shocks attached the frame. (Note:
1NM = 0.74 lb ft)
Pic.12
2.2 Assemble the rear wheels (pic.13): Take off the nut M14x1.5 and Φ
14 washer from the rear axle. Raise up the tail part and set up the rear
wheel onto the rear axle, screw the washer and nut screw tightly with
83-98NM, then open the cotter pin 3X40 for fixing, cover the hub cover.
Pic.13
2.3 Assemble front lower suspension arm (Pic.14): lift the front part of go
kart onto a table. Take down the nut and washer from the spindle and strut
support, insert the ball head into the mount position of lower suspension
arm (square part of ball head is placed to the square hole of suspension
MINI XRX Set up instruction
7
arm), put on the washer and nut. Screw on the bolt with torque 37-44NM.
At last open the cotter pin 2X20 for fixing.
Pic.14
2.4 Assemble the front wheel (pic.15): Take off the nut M12x1.25 and Φ
12 washer from the rear axle. Raise up the front part and set up the rear
wheel onto the rear axle, screw the washer and nut screw tightly with
55-62NM, cover the hub cover.
Pic.15
2.5 Assemble the sport seat (Pic.16): Take down the bolt from the middle
fixing point of safety belt, unloose the safety belt. Cut a 50mm long gap
on the seam between seat and back. Insert the safety belt through the gap,
install the sport seat on the frame, and screw on the 4 M8x35 bolts to fix
the sport seat and safety belt.
MINI XRX Set up instruction
8
Pic.16
2.6 Assemble the long bar cages (Pic.17): put two sides of long bar cages
onto the connection rods on frame fixing with bolt M8x45, R-washer and
M8 nut. Tighten the bolts.
Pic.17
2.7 Assemble the side bar (pic.18): Put one side of side bar attaching the
long bar cage, connect the side bar and the long bar cage together with
bolt M8x45, R-washer, screw the bolts 3 turns. Connect another side of
side bar onto the connection rod of frame with R-washer, bolt M8x45 and
bolt. Screw on all the bolts tightly.
MINI XRX Set up instruction
9
Pic.18
2.8 Assemble the cross bar (Pic.19): Connect the cross bar with two long
bar cages with bolt M8X50 and R-washer, do not tightening the bolts at
this step.
Pic.19
2.9 Assemble the roof rack bars (pic.20): fix the rear cross bar with long
bar cage together using bolt M8x50 and R-washer.
Pic.20
MINI XRX Set up instruction
10
2.10 Screw on the bolts from step 2.6 to 2.9 with torque 22-29NM.
2.11 Assemble the yellow flag and flagpole: use the plastic bolt and nut to
fix the flagpole on the rear cargo rack.
2.12 Install the battery, battery cover: put the battery liquid into the
battery body, close the battery cover. Put the cushion plate into the battery
mount box. Connect the battery wires to the battery poles “+ to +; - to –”,
cover them. Put the wired battery into the battery mount box covered with
the plastic protection cover, put the wires out through the protection cover
slot, fasten the battery with battery strap. (Note: because the battery liquid
and wiring of battery poles are dangerous, only experienced adult can
carry out this carefully with protection measures (protective glove,
Prevent electric screwdriver).
2.13 Assemble the steering wheel: Check the front wheel is at the straight
position. Take down the bolts on steering shaft, put the steering wheel
correctly onto the steering shaft (as shown in pic. 21). Screw the bolts
with 11-16NM torque. Cover the steering bolt cover.
Pic.21
2.14 Assemble the stand exhaust guard and bracket (Pic.22): place the
stand exhaust guard on the mounting place of engine, insert the M6x12
Andere Handbücher für MINI XRX
1
Inhaltsverzeichnis
Andere TrailMaster Nutzfahrzeug Handbücher
TrailMaster
TrailMaster MINI XRS Handbuch
TrailMaster
TrailMaster Blazer4 150X 2018 Stücklistenhandbuch
TrailMaster
TrailMaster TBM150 Bedienungsanleitung
TrailMaster
TrailMaster K5 Betriebsanleitung
TrailMaster
TrailMaster Blazer4 150X Stücklistenhandbuch
TrailMaster
TrailMaster CHALLENGER150 Betriebsanleitung
TrailMaster
TrailMaster 300xrx Bedienungsanleitung
TrailMaster
TrailMaster 150 Bedienungsanleitung
TrailMaster
TrailMaster Challenger 300UTV-X Stücklistenhandbuch
TrailMaster
TrailMaster MINI XRX Bedienungsanleitung
TrailMaster
TrailMaster Challenger 150UTV-X Stücklistenhandbuch
TrailMaster
TrailMaster 150XRS Handbuch
TrailMaster
TrailMaster TAURUS 400UTV Stücklistenhandbuch
TrailMaster
TrailMaster MID XRX Bedienungsanleitung
TrailMaster
TrailMaster MID XRX Bedienungsanleitung
TrailMaster
TrailMaster Challenger4 300 Stücklistenhandbuch
TrailMaster
TrailMaster MID XRS Handbuch
