TEF D620/D621 Ex d / Ex e CABLE GLAND USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval, may
be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/
or specific procedures that are related to the installation.
The product is not intended to be repaired. The “sealing
ring” and entry threads contain flamepaths, and shall not
be repaired, but replaced with spare parts from Tranberg
AS.
TOOLS REQUIRED
Wrench according to size of cable gland
MAINTENANCE INSTRUCTIONS
The product should be inspected according to company
routines and/or relevant national regulations for your coun-
try.
APPLICATIONS
• Outdoor or indoor for unarmoured cables
• Sealing on cables outer sheath only.
• Suitable for use in hazardous area, zone 1, zone 2
and safe area.
APPROVALS
Compliance standards:
Directive 94/9/EC,
EN60079-0:2012,
EN60079-1:2007,
IEC 60079-0,
IEC 60079-1.
IECEx: IECEx PRE 14.0023
ATEX: PRESAFE 14ATEX1532
