TEF 1239 WATERTIGHT SWITCH USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/or
specific procedures that are related to the installation.
TOOLS REQUIRED
Regular tools required for installation:
• 3mmflatscrewdriver–forthescrewonthetopoftheswitch.
• 6,5 mm flat screwdriver - for connecting switch and
earth screw.
• 10 mm flat screwdriver - for blindplug.
• 27 mm wrench – for cable gland.
• 25 mm wrench – for tightening the pressure nut.
MAINTENANCE INSTRUCTIONS
The switch should be inspected according to Company
routines. The manufacturer suggests regular check for
water intrusion/condensation which should be removed
immediately.
APPLICATIONS
• 2 POLE Amp. 250V AC
• Switch for use in marine environment and safe area.
• For use in harsh environments and adverse weather
conditions.
APPROVALS
Certificate NEMKO GR.1.112.6 or 14.1.112.6
