Trane Mitsubishi Electric TPEFYP006MA143A Bedienungsanleitung

HWE1832A GB

Safety Precautions

Read before installation and performing electrical work

Symbol explanations

Thoroughly read the following safety precautions prior to installation.

Observe these safety precautions for your safety.

This equipment may have adverse effects on the equipment on the same power supply system.

Contact the local power authority before connecting to the system.

WARNING

This symbol indicates that failure to follow the instructions exactly as stated poses the risk of serious injury or death.

CAUTION

This symbol indicates that failure to follow the instructions exactly as stated poses the risk of serious injury or dam-

age to the unit.

Indicates an action that must be avoided.

Indicates important instructions.

Indicates a parts that requires grounding.

Indicates that caution must be taken with rotating parts. (This symbol is on the main unit label.) <Color: Yellow>

Indicates that the parts that are marked with this symbol pose a risk of electric shock. (This symbol is on the main

unit label.) <Color: Yellow>

WARNING

Carefully read the labels affixed to the main unit.

WARNING

Do not use refrigerant other than the type indicated in the

manuals provided with the unit and on the nameplate.

Doing so may cause the unit or pipes to burst, or result in

explosion or fire during use, during repair, or at the time of

disposal of the unit.

It may also be in violation of applicable laws.

Mitsubishi Electric Trane HVAC US LLC cannot be held re-

sponsible for malfunctions or accidents resulting from the

use of the wrong type of refrigerant.

Ask your dealer or a qualified technician to install the unit.

Improper installation by the user may result in water leak-

age, electric shock, or fire.

Properly install the unit on a surface that can withstand its

weight.

Unit installed on an unstable surface may fall and cause in-

jury.

Only use specified cables. Securely connect each cable so

that the terminals do not carry the weight of the cable.

Improperly connected cables may produce heat and start a

fire.

Take appropriate safety measures against wind gusts and

earthquakes to prevent the unit from toppling over.

Improper installation may cause the unit to topple over and

cause injury or damage to the unit.

Only use accessories (i.e., air cleaners, humidifiers, electric

heaters) recommended by Mitsubishi Electric Trane HVAC

US LLC.

Do not make any modifications or alterations to the unit.

Consult your dealer for repair.

Improper repair may result in water leakage, electric shock,

or fire.

Do not touch the heat exchanger fins with bare hands.

The fins are sharp and pose a risk of cuts.

In the event of a refrigerant leak, thoroughly ventilate the

room.

If gaseous refrigerant leaks out and comes in contact with

an open flame, toxic gases will be generated.

Properly install the unit according to the instructions in the

Installation Manual.

Improper installation may result in water leakage, electric

shock, or fire.

HWE1832A GB

Have all electrical work performed by an authorized electri-

cian according to the local regulations and the instructions

in this manual. Use a dedicated circuit.

Insufficient power supply capacity or improper installation

of the unit may result in malfunctions of the unit, electric

shock, or fire.

Keep electrical parts away from water.

Wet electrical parts pose a risk of electric shock, smoke, or

fire.

Securely attach the control box cover.

If the cover is not installed properly, dust or water may infil-

trate and pose a risk of electric shock, smoke, or fire.

Only use the type of refrigerant that is indicated on the unit

when installing or relocating the unit.

Infiltration of any other types of refrigerant or air into the unit

may adversely affect the refrigerant cycle and may cause

the pipes to burst or explode.

When installing the unit in a small space, take appropriate

precautions to prevent leaked refrigerant from reaching the

limiting concentration.

Leaked refrigerant gas will displace oxygen and may cause

oxygen starvation. Consult your dealer before installing the

unit.

Consult your dealer or a qualified technician when moving

or reinstalling the unit.

Improper installation may result in water leakage, electric

shock, or fire.

After completing the service work, check for a refrigerant

leak.

If leaked refrigerant is exposed to a heat source, such as a

fan heater, stove, or electric grill, toxic gases will be gener-

ated.

Do not try to defeat the safety features of the unit.

Forced operation of the pressure switch or the temperature

switch by defeating the safety features for these devices, or

the use of accessories other than the ones that are recom-

mended by Mitsubishi Electric Trane HVAC US LLC may

result in smoke, fire, or explosion.

Consult your dealer for proper disposal method.

Do not use a leak detection additive.

iiiiii

HWE1832A GB

Precautions for handling units for use with R410A

CAUTION

Do not use the existing refrigerant piping.

A large amount of chlorine that may be contained in the re-

sidual refrigerant and refrigerator oil in the existing piping

may cause the refrigerator oil in the new unit to deteriorate.

Use refrigerant piping materials made of phosphorus deox-

idized copper. Keep the inner and outer surfaces of the

pipes clean and free of such contaminants as sulfur, oxides,

dust, dirt, shaving particles, oil, and moisture.

Contaminants in the refrigerant piping may cause the refrig-

erator oil to deteriorate.

Store the piping materials indoors, and keep both ends of

the pipes sealed until immediately before brazing. (Keep el-

bows and other joints wrapped in plastic.)

Infiltration of dust, dirt, or water into the refrigerant system

may cause the refrigerator oil to deteriorate or cause the

compressor to malfunction.

Use a small amount of ester oil, ether oil, or alkyl benzene

to coat flares and flanges.

Infiltration of a large amount of mineral oil may cause the re-

frigerator oil to deteriorate.

Charge the system with refrigerant in the liquid phase.

If gaseous refrigerant is drawn out of the cylinder first, the

composition of the remaining refrigerant in the cylinder will

change and become unsuitable for use.

Only use R410A.

The use of other types of refrigerant that contain chloride

may cause the refrigerator oil to deteriorate.

Use a vacuum pump with a check valve.

If a vacuum pump that is not equipped with a check valve is

used, the vacuum pump oil may flow into the refrigerant cy-

cle and cause the refrigerator oil to deteriorate.

Prepare tools for exclusive use with R 410A. Do not use the

following tools if they have been used with the conventional

refrigerant: gauge manifold, charging hose, gas leak detec-

tor, check valve, refrigerant charge base, vacuum gauge,

and refrigerant recovery equipment.

If the refrigerant or the refrigerator oil that may be left on these

tools are mixed in with R410A, it may cause the refrigerator oil

in the new system to deteriorate.

Infiltration of water may cause the refrigerator oil to deteriorate.

Leak detectors for conventional refrigerants will not detect an

R410A leak because R410A is free of chlorine.

Do not use a charging cylinder.

If a charging cylinder is used, the composition of the refrigerant

in the cylinder will change and become unsuitable for use.

Exercise special care when handling tools for use with R410A.

Infiltration of dust, dirt, or water into the refrigerant system

may cause the refrigerator oil to deteriorate.

HWE1832A GB

CONTENTS

HWE1832A GB

I Features

[1] Features.................................................................................................................................... 1

II Components and Functions

[1] Components and Functions...................................................................................................... 2

III Specifications

[1] Specifications............................................................................................................................ 5

1.Specifications.......................................................................................................................... 5

2.Electrical component specifications........................................................................................ 8

IV Outlines and Dimensions

[1] Outlines and Dimensions.......................................................................................................... 9

V Wiring Diagram

[1] Wiring Diagram ....................................................................................................................... 11

VI Refrigerant System Diagram

[1] Refrigerant system diagram.................................................................................................... 12

VII Microprocessor Control

[1] Microprocessor Control........................................................................................................... 13

1.Cool operation ...................................................................................................................... 13

2.Drying operation ................................................................................................................... 14

3.Fan operation........................................................................................................................ 15

4.Heat operation ...................................................................................................................... 16

5.Auto operation [Automatic cool / heat change over operation]............................................. 17

6.When unit is stopped control mode ...................................................................................... 18

7.Heater control ....................................................................................................................... 18

VIII Troubleshooting

[1] Troubleshooting ...................................................................................................................... 22

1.Check methods..................................................................................................................... 22

2.DC fan motor (fan motor/indoor control board)..................................................................... 26

3.Address switch setting .......................................................................................................... 27

4.Voltage test points on the control board ............................................................................... 28

5.Dipswitch setting (Factory setting)........................................................................................ 29

IX Disassembly Procedure

[1] Disassembly Procedure.......................................................................................................... 32

1.Control box ........................................................................................................................... 32

2.Thermistor (Intake air) .......................................................................................................... 33

3.Drainpan ............................................................................................................................... 34

4.Thermistor (Gas pipe) (Liquid pipe) ...................................................................................... 35

5.Fan and fan motor ................................................................................................................ 36

6.Heat exchanger .................................................................................................................... 37

HWE1832A GB

[ I Features ]

- 1 -

HWE1832A GB

I Features

[1] Features

Model Cooling capacity/Heating capacity

BTU/h kW

TPEFYP006MA143A 6000/6700 1.8/2.0

TPEFYP008MA143A 8000/9000 2.3/2.6

TPEFYP012MA143A 12000/13500 3.5/4.0

TPEFYP015MA143A 15000/17000 4.4/5.0

TPEFYP018MA143A 18000/20000 5.3/5.9

TPEFYP024MA143A 24000/27000 7.0/7.9

TPEFYP027MA143A 27000/30000 7.9/8.8

TPEFYP030MA143A 30000/34000 8.8/10.0

TPEFYP036MA143A 36000/40000 10.6/11.7

TPEFYP048MA143A 48000/54000 14.1/15.8

TPEFYP054MA143A 54000/60000 15.8/17.6

[ II Components and Functions ]

- 2 -

HWE1832A GB

II Components and Functions

[1] Components and Functions

1. Indoor (Main) Unit

(1) In case of rear inlet (2) In case of bottom inlet

Air inlet

Air outlet

Air inlet

[ II Components and Functions ]

- 3 -

HWE1832A GB

2. Remote Controller

[TAR-40MAAU]

Once the operation mode is selected, the unit will remain in the selected mode until changed.

(1) Remote Controller Interface

Main display Main menu

⑦⑧⑨⑩ ⑦⑧⑨⑩

Menu screen

⑦⑧⑨⑩

Function buttons

⑥

①

②

③

④

⑤

⑦⑧⑨⑩

Function guide

①[ON/OFF] button

Press to turn ON/OFF the indoor unit.

②[SELECT/HOLD] button

Press to save the setting.

When the Main menu is displayed, pressing this button will enable/disable the

HOLD function.

③[RETURN] button

Press to return to the previous screen.

④[MENU] button

Press to bring up the Main menu.

⑤Backlit LCD

Operation settings will appear.

When the backlight is off, pressing any button turns the backlight on and it will

stay lit for a certain period of time depending on the screen.

When the backlight is off, pressing any button turns the backlight on

and does not perform its function. (except for the [ON/OFF] button)

⑥ON/OFF lamp

This lamp lights up in green while the unit is in operation. It blinks while the

remote controller is starting up or when there is an error.

The functions of the function buttons change depending on the screen.

Refer to the button function guide that appears at the bottom of the LCD for

the functions they serve on a given screen.

When the system is centrally controlled, the button function guide that

corresponds to the locked button will not appear.

⑦Function button [F1]

Main display: Press to change the operation mode.

Menu screen: The button function varies with the screen.

⑧Function button [F2]

Main display: Press to decrease temperature.

Main menu: Press to move the cursor left.

Menu screen: The button function varies with the screen.

⑨Function button [F3]

Main display: Press to increase temperature.

Main menu: Press to move the cursor right.

Menu screen: The button function varies with the screen.

⑩Function button [F4]

Main display: Press to change the fan speed.

Menu screen: The button function varies with the screen.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Trane Klimaanlage Handbücher

Trane

Trane IntelliPak SCWF 20 Montage- und Bedienungsanleitung

Trane

Trane 4YCZ6036A Montageanleitung

Trane

Trane IntelliPak 1 Montage- und Bedienungsanleitung

Trane

Trane 4TVH0086FE000AA Bedienungsanleitung

Trane

Trane 4MCW3-A Bedienungsanleitung

Trane

Trane TWA0724-A Series Montage- und Bedienungsanleitung

Trane

Trane Voyager TC* Bedienungsanleitung

Trane

Trane UniTrane Handbuch

Trane

Trane XL16i Bedienungsanleitung

Trane

Trane 4TCA4024A1000A Montageanleitung

Trane

Trane Odyssey TTA0724 A Series Benutzerhandbuch

Trane

Trane OXBOX J4AH4P Series Bedienungsanleitung

Trane

Trane 18, 24, 30, 36, 24, 42, 48 Bedienungsanleitung

Trane

Trane Precedent YSJ072 Montage- und Bedienungsanleitung

Trane

Trane Precedent FIAECON002 Series Bedienungsanleitung

Trane

Trane R410a Benutzerhandbuch

Trane

Trane YZJ150 Montage- und Bedienungsanleitung

Trane

Trane S*HF*20-75 Bedienungsanleitung

Trane

Trane Foundation BAYDMPR321 Series Bedienungsanleitung

Trane

Trane TXUM524 Betriebsanleitung

Trane

Trane SEHJ090-162 Montage- und Bedienungsanleitung

Trane

Trane Voyager YS 150-300 Montage- und Bedienungsanleitung

Trane

Trane CyberAir DX Montage- und Bedienungsanleitung

Trane

Trane TTA090A series Betriebsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung