Trane Tracer SC Bedienungsanleitung

SAFETY WARNING

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-

conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment

by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the literature and

on the tags, stickers, and labels that are attached to the equipment.

Tracer™SC System Controller

Daily Operations

Guide

BAS-SVU025A-EN

November 2013

This document and the information in it are the property ofTrane and may not be used

or reproduced in whole or in part, without the written permission ofTrane.Trane reserves

the right to revise this publication at any time and to make changes to its content without

obligation to notify any person of such revision or change.

Trademarks

Trane and its logo are trademarks ofTrane in the United States and other countries. All

trademarks referenced in this document are the trademarks of their respective owners.

Warnings, Cautions, and Notices

Warnings, cautions, and notices are provided in appropriate places throughout this

document:

Revision History

New

WARNING Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTIONsIndicates a potentially hazardous situation which, if not avoided, could result in

minor or moderate injury. It could also be used to alert against unsafe practices.

NOTICE: Indicates a situation that could result in equipment or property-damage only

accidents.

Table of Contents

BAS-SVU025A-EN 3

Introduction ......................................................6

How to Use This Guide ........................................... 6

Additional Resources ............................................ 7

Product Overview .................................................8

Tracer SC Model Numbers ........................................ 8

Tracer SC Components ........................................... 8

Tracer SC Accessories ........................................... 9

Tracer SC Service Parts .......................................... 9

Licensing and Hardware ......................................... 11

Setup Requirements ............................................ 11

Navigating the User Interface .......................................12

Applying the Table Filter ........................................ 13

Using the Actions Button ........................................ 14

The Navigation Tree ..............................................15

Using the Navigation Tree ....................................... 15

Drag a Tracer SC Component onto the Tree ....................... 16

Drag a Tree Component onto the Home Button .................... 16

Drag Tree Nodes to Other Locations ............................. 16

Rename Tree Nodes .......................................... 16

Editing the Navigation Tree ...................................... 17

Adding a Custom Graphics Node to the Tree ...................... 17

Editing a Node on the Tree ..................................... 17

Adding a Custom Folder to the Tree ............................. 17

Deleting a Node from the Tree .................................. 17

Undoing a Change to the Tree .................................. 17

Redoing a Previously Undone Change to the Tree ................. 17

Reseting the Tree to Standard Configuration ...................... 17

Viewing Help for the Navigation Tree ............................ 17

Alarms and Events Log ............................................18

Taking Action on an Alarm ....................................... 18

Event Classes .................................................. 18

Reports .........................................................20

Create a Report ................................................ 21

Export a Report ................................................ 21

Data Logs .......................................................22

Scheduled Data Logs ........................................... 23

Creating a Scheduled Data Log ................................. 23

Triggered Data Logs ............................................ 23

4 BAS-SVU025A-EN

Creating a Triggered Data Log .................................. 23

Spaces ..........................................................25

Space Status .................................................. 26

Equipment ......................................................27

Equipment Status .............................................. 28

Schedules .......................................................29

Optimal Start/Stop ............................................. 29

Creating a Schedule ............................................ 30

Exceptions and Calendars ....................................... 30

Points ..........................................................32

Point Types ................................................... 32

Point Overrides ..................................................34

Overriding a Point .............................................. 34

Using the Override Dialog Box ................................... 35

Systems ........................................................36

Area Application ............................................... 36

Variable Air Systems (VAS) Application ............................ 36

Chiller Plant Control (CPC) Application ............................. 36

Viewing System Status .......................................... 37

Tools ...........................................................38

Backup and Restore ............................................ 38

Custom Graphics ............................................... 39

Global Referencers ............................................. 39

Programs ..................................................... 39

System Logs .................................................. 39

Tracer ES IP Address ............................................ 39

Unit Controllers ..................................................40

Trane Unit Controllers Supported by the Tracer SC .................. 40

Non-Trane Unit Controllers Supported by Tracer SC ................. 40

LEDs and the 7-Segment Display ....................................41

Powering Up/Powering Down the Tracer SC ........................ 41

The LEDs and the 7-Segment Display .............................. 41

Interpreting the LEDs ......................................... 42

Interpreting the 7-Segment Display .............................. 43

Troubleshooting ..................................................44

BAS-SVU025A-EN 5

Troubleshooting with LEDs and the 7-Segment Display ............... 44

Force Return to Factory Defaults .................................. 44

Troubleshooting Network Connections ............................ 45

PING ....................................................... 45

IPCONFIG ................................................... 45

Web Browser Security Settings ................................. 45

6 BAS-SVU025A-EN

Introduction

TheTracer SC Daily Operations Guide provides information and instructions for tasks that daily

operators typically perform in aTrane BAS using theTracer SC System Controller, such as

managing alarms and events, overriding setpoints, and running reports.

The following information is provided in this document:

• Product overview (hardware, model numbers, licensing)

• Navigating theTracer SC user interface, performing daily operator BAS tasks

• Interpreting the LEDs and 7-segment display, troubleshooting

This guide does not cover programming and configuration. For more information on advanced

user tasks, refer to theTracer SC System Controller Installation and Setup Guide, BAS-SVX31-EN,

or access theTracer SC Help by clicking the help icon located on the global navigation bar.

How to UseThis Guide

Although it is best practice to familiarize yourself with all aspects ofTracer SC, it is not necessary

to read this guide in any particular order or in its entirety.To quickly locate a specific task or topic,

simply refer to theTable of Contents on page 3.

The sections in this guide that describeTracer SC applications will begin with an overview of the

application (Alarms, Reports, for example) and an accompanying figure that shows the application

highlighted on the left-hand navigation bar (see Figure 1).

Note: If you are reading a copy of this document that was translated from English, please note that

all figures and illustrations in this guide are for navigational purposes only. The data and

text depicted is not relevant to the accompanying instructions.

Figure 1. Example of navigational elements

The application

currently in view is

highlighted on the

left-handnavigation

bar.

BAS-SVU025A-EN 7

Introduction

Additional Resources

Following is a list of relatedTracer SC documentation and training resources.

Tracer™ SC System Controller Installation and Setup Guide (BAS-SVX31-EN)

Describes detailed configuration for network settings, Ethernet network wiring, and IT security.

Tracer™ SC System Controller Installation Sheet (X39641154-01)

For mounting the enclosure and providing AC power.

Tracer™ SC online help

An online help system is included with theTracer SC user interface. Global help has a table of

contents and is searchable. Contextual help is specific to the information on each page.

Tracer™ BAS Operator Suite (Mobile App) Getting Started Guide

(BAS-SVU23-EN)

Describes how to obtain, download, install, and set up the mobile app.

BACnet®MS/TP Wiring Best Practices and Troubleshooting (BAS-SVX051-EN)

Provides best practices, procedures, and troubleshooting for wiring BACnet unit controllers to a

Tracer SC system controller.

Tracer™ SC Air Systems Application Guide (BAS-APG007-EN)

Describes variable-air-volume strategies for variable air systems. It also include constant-volume

applications and area application strategies forTracer SC.

Tracer™ Graphical Programming (TGP2) Application Guide (BAS-APG008-EN)

Describes how to use theTGP2 editor and typical implementation strategies and best practices for

usingTGP2.

Tracer™TU Service Tool Getting Started Guide (TTU-SVN01-EN)

This document describes how to use theTracerTU service tool to

• Transfer programs to theTracer SC

• Start theTracer Graphical Programming (TGP2) Editor and theTracer Graphics Editor from

withinTracerTU

• Backing up and restoring firmware andTGP2 programs

Trane College of Building Automation

TheTrane College of Building Automation (TCBA) offers a comprehensive portfolio of technical

courses to help you effectively monitor and coordinate your HVAC equipment and systems.

http://www.trane.com/Commercial/DNA/view.aspx?i=586

8 BAS-SVU025A-EN

Product Overview

TheTracer™ SC system controller (Tracer SC) serves as the central coordinator for all individual

equipment devices on aTracer building automation system.The Web-based interface of theTracer

SC system controller provides an easy and convenient way for building operators to access their

building automation system. Access is available from most PCs, tablets and smartphones that

meet system requirements.

Tracer SC Model Numbers

Tracer SC Components

TheTracer SC is equipped with the components shown in Figure 1.

Model number Description

BMSC000AAA011000 (current) Tracer SC with power supply module (PM014) with U.S. outlet, enclosure ordered separately

BMSC000AAA011100 (obsolete) Tracer SC system controller with power supply module (PM214) with U.S. outlet, in enclosure

BMSC000AAA011200 (obsolete) Tracer SC system controller with power supply module (PM214), in enclosure

Figure 1. Tracer SC components

IMC IMC

BACnet

MS/TP LINK 1 BACnet

MS/TP LINK 2

USB service

tool port

SD card port (future)

EIA-232 serial connection

USB host (future)

Ethernet network connection 2 (supports

TCP/IP) (recommended for direct

connection to PC)

Ethernet network connection 1 (supports

BACnet and TCP/IP (recommended for

building network connection)

Power button

Status LED

7-segment display

Rotary switches

LonTalk service pin

LonTalk

BACnet LEDs

Ethernet LEDs

LonTalk LEDs

LonTalk service LED

IMC LEDs

EIA-232 LEDs

BAS-SVU025A-EN 9

Product Overview

Tracer SC Accessories

Tracer SC Service Parts

The service parts listed in Table 1 and Table 2 are available for theTracer SC.The numbers in the

tables correspond to those in Figure 2.

Note: Some of the service parts are the same for all models.

Description Order number

BACnet terminator 2 pack(a)

(a)For information about this accessory, see BACnet MS/TP Wiring Best Practices (BAS-SVX051-EN).

X1365152401

Rover LonTalk interface adaptor(b)

(b)For information about this accessory, see Rover Service Tool Installation, Operation, and Programming (EMTX-SVX01).

S3090062062

Table 1. Tracer SC model BMSC000AAA011000 (current)

Number in

Figure 2 Description Order number

1 Enclosure for DIN-mounted controllers (120 VAC, with outlet) X13651559010

2 Tracer SC module S3090058462

3 Power supply module X1365153801

(not shown) Enclosure for DIN-mounted controllers (230 VAC, no outlet) X13651560010

(not shown) Transformer service part S3090062462

4 IMC power cable S3090059562

(not shown) Large enclosure for DIN-mounted controllers, 120 VAC, with outlet

(solid door) X13651552-01

(not shown) Large enclosure for DIN-mounted controllers, 120 VAC, with outlet

(display-capable door) X13651553-01

(not shown) Large enclosure for DIN-mounted controllers, 230 VAC, with outlet

(display-capable door) X13651554-01

(not shown) Large enclosure for DIN-mounted controllers, 230

VAC, with outlet (display-capable door) X13651555-01

Table 2. Tracer SC models BMSC000AAA011100 and BMSC000AAA011200 (obsolete)

Number in

Figure 2 Description Order number

2 Tracer SC module S3090058462

3 Power supply module S3090058562

4 IMC power cable S3090059562

5 Cable assembly/modular terminal kit with U.S. outlet S3090059062

(not shown) Cable assembly/modular terminal kit S3090059162

6 Control panel cover (for models with U.S. outlet) S3090058962

(not shown) Control panel cover S3090058862

7 Enclosure S3090058762

10 BAS-SVU025A-EN

Product Overview

Figure 2. Service parts for the Tracer SC

Andere Handbücher für Tracer SC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Trane Controller Handbücher

Trane

Trane Tracer UC400 Bedienungsanleitung

Trane

Trane BAYSTAT253A Montageanleitung

Trane

Trane Tracer VV550 Bedienungsanleitung

Trane

Trane Tracer MP581 Bedienungsanleitung

Trane

Trane TCONTCCMHCM04A Bedienungsanleitung

Trane

Trane IPG315D Bedienungsanleitung

Trane

Trane Tracer ZN517 Betriebsanleitung

Trane

Trane Mini Bedienungsanleitung

Trane

Trane CNT09289 Montageanleitung

Trane

Trane PIC Betriebsanleitung

Trane

Trane CONTH01AAUTOA Montageanleitung

Trane

Trane 500 Montage- und Bedienungsanleitung

Trane

Trane Tracer MP581 Bedienungsanleitung

Trane

Trane Tracer ZN511 Betriebsanleitung

Trane

Trane Symbio 210 Montage- und Bedienungsanleitung

Trane

Trane Tracer VV551 Bedienungsanleitung

Trane

Trane TR1 6002 Bedienungsanleitung

Trane

Trane Tracer CH535 Bedienungsanleitung

Trane

Trane Tracer ZN521 Betriebsanleitung

Trane

Trane Tracer AH540 Bedienungsanleitung

Trane

Trane VariTrane VAV-SVX02B-EN Betriebsanleitung

Trane

Trane SmartGen HSC940 Bedienungsanleitung

Trane

Trane TCONT 800 Series Montage- und Bedienungsanleitung

Trane

Trane Tracer VV550 Montage- und Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch