Transmille 8071 Installationshandbuch

8000 SERIES

OPERATION MANUAL

VERSATILE PRECISION

Version 2.10 : Nov 2009

All product names are trademarks of their respective companies

8000 Series

Precision Multimeter

Operation Manual

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 2

IMPORTANT NOTICE

THIS PRODUCT

WILL

REQUIRE AN

UNLOCK CODE

AFTER THE EVALUATION

PERIOD HAS EXPIRED.

(60 Days After Invoice Date)

AFTER THE EVALUATION PERIOD HAS EXPIRED THE OPERATION

OF THE PRODUCT IS LOCKED AND THE DISPLAY SHOWS A

NUMBER WHICH MUST BE QUOTED TO TRANSMILLE TO RECEIVE

THE UNLOCK CODE

THE UNLOCK CODE IS AVAILALBLE

FROM TRANSMILLE

ONLY AFTER PAYMENT

HAS BEEN RECEIVED.

(This code is only entered once in the life of the instrument.)

Please contact Transmille or use the form in the

back of the manual to obtain the code.

Transmille Ltd.

Staplehurst , Kent.

Tel: 44 (0)1580 890700 : Fax 44 (0)1580 890711

email:- [email protected]

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 3

DECLARATION OF CONFORMITY

Manufacturer’s Name: Transmille Ltd.

Manufacturer’s Address: Unit 4, Select Business Centre

Lodge Road

Staplehurst

TN12 0QW

Declares, that the product

Product Name: Multimeter

Model Number: 8071 / 8081

Product Options: This declaration covers all options of the above product(s)

Conforms with the following European Directives:

The product herewith complies with the requirements of the Low Voltage Directive 73/73EEC

and the EMC Directive 89/336/EEC (including 93/68/EEC) and carries the CE Marking

accordingly

Conforms with the following product standards:

EMC

Standard Limit

IEC616326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998 EN55011:1991

IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995 Group 1Class A

IEC 61000-4-3:1995 / EN 61000-4-3:1995 4kV CD, 8kV AD

IEC 61000-4-4:1995 / EN 61000-4-4:1995 3 V/m, 80-1000 MHz

IEC 61000-4-5:1995 / EN 61000-4-5:1995 0.5kV signal lines, 1kV power lines

IEC 61000-4-6:1996 / EN 61000-4-6:1996 0.5kV line-line, 1kV line-ground

IEC 61000-4-11:1994 / EN 61000-4-11:1994 3V, 0.15-80 MHz I cycle, 100%

Dips: 30% 10ms; 60% 100ms

Interrupt > 95%@5000ms

SAFETY

IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995

Date : 27/02/2009

Revision No: 1.00

Managing Director

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 4

TABLE OF CONTENTS

8000 SERIES MULTIMETER INTRODUCTION....................................................................................6

MAIN FEATURES...................................................................................................................................6

ACCURACY AND FUNCTIONALITY ...........................................................................................................7

MULTI PRODUCT MULTIMETER...............................................................................................................7

EXPANDABLE RANGE OF PRESSURE MODULES ......................................................................................7

MULTI INTERFACE SUPPORT : AVAILABLE AS STANDARD. .......................................................................8

OUTPUT CONNECTION ..........................................................................................................................8

PREPARING THE MULTIMETER FOR USE........................................................................................9

INITIAL INSPECTION...............................................................................................................................9

LIFTING AND CARRYING THE MULTIMETER ..............................................................................................9

POSITIONING THE MULTIMETER. ..........................................................................................................10

REAR PANEL CONNECTIONS AND CONTROLS........................................................................................11

SETTING AND CHECKING THE LINE VOLTAGE. .......................................................................................12

POWER LINE INLET FUSE AND RATING..................................................................................................12

CONNECTING TO A COMPUTER......................................................................................................13

POWERING UP THE MULTIMETER...................................................................................................15

OUTPUT CONNECTIONS...................................................................................................................16

INPUT OVERLOADS .............................................................................................................................17

SAFETY WARNINGS ............................................................................................................................18

INTRODUCTION TO OPERATION............................................................................................................18

CONTROLS & FUNCTIONS ...................................................................................................................19

PREPARING THE MULTIMETER FOR USE...............................................................................................20

CONNECTIONS FOR VOLTAGE MEASUREMENT TO 1KV..........................................................................21

CONNECTIONS FOR LOW CURRENT MEASUREMENT TO 1A....................................................................21

CONNECTIONS FOR LOW CURRENT MEASUREMENT TO 30A..................................................................21

CONNECTIONS FOR 2 WIRE RESISTANCE MEASUREMENT.....................................................................22

CONNECTIONS FOR 4 WIRE RESISTANCE MEASUREMENT.....................................................................22

ELECTROMETER INPUT : HIGH RESISTANCE MEASUREMENT .................................................................23

ELECTROMETER INPUT : LOW CURRENT MEASUREMENT ......................................................................23

FRONT PANEL CONTROLS AND INDICATORS..............................................................................24

FRONT PANEL SECTIONS ....................................................................................................................24

INPUT TERMINALS & INDICATOR LEDS.................................................................................................24

FUNCTION KEYS .................................................................................................................................25

RANGE & READBACK CONTROLS.........................................................................................................25

INPUT & MENU CONTROLS..................................................................................................................25

MENU DIAL.........................................................................................................................................26

ELECTROMETER I/O TERMINALS..........................................................................................................26

FRONT PANEL KEYBOARD....................................................................................................................26

DUAL DISPLAY....................................................................................................................................27

OPERATING THE MULTIMETER .......................................................................................................28

SELECTING A RANGE ..........................................................................................................................28

FRONT PANEL MENU ..........................................................................................................................29

SETTINGS MENU.................................................................................................................................30

CONFIGURATION MENU.......................................................................................................................31

USER MENU.......................................................................................................................................33

DC VOLTAGE .....................................................................................................................................35

AC VOLTAGE .....................................................................................................................................36

DC CURRENT.....................................................................................................................................37

DC CURRENT (ELECTROMETER MODE) (8081)....................................................................................38

AC CURRENT.....................................................................................................................................39

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 5

2-WIRE RESISTANCE ..........................................................................................................................40

2-WIRE RESISTANCE (ELECTROMETER MODE) (8081).........................................................................41

4-WIRE RESISTANCE ..........................................................................................................................42

FREQUENCY.......................................................................................................................................43

THERMOCOUPLE MEASUREMENT (8081) .............................................................................................44

PRT MEASUREMENT (8081)...............................................................................................................45

Guide to setting up a PRT probe.................................................................................................46

PRESSURE MEASUREMENT (8081)......................................................................................................47

SHUNT MEASUREMENT (8081)............................................................................................................48

DC POWER / DUAL INPUT V/30A (8081).............................................................................................49

USING THE MATH FUNCTIONS..............................................................................................................50

REMOTE PROGRAMMING.................................................................................................................51

PROGRAMMING COMMANDS OVERVIEW...............................................................................................52

8000 SERIES DMM REMOTE COMMANDS ...........................................................................................54

SCPI.................................................................................................................................................54

GENERAL ...........................................................................................................................................54

CALIBRATION......................................................................................................................................55

GETTING THE BEST OUT OF THE MULTIMETER...........................................................................56

THERMALLY GENERATED EMF VOLTAGE ERRORS.................................................................................56

POWER LINE AND LOW FREQUENCY PICK UP AND NOISE........................................................................56

CALIBRATION.....................................................................................................................................57

CALIBRATION OVERVIEW.....................................................................................................................57

ENTERING CALIBRATION MODE ...........................................................................................................57

EXAMPLE 1 : DC VOLTAGE 10V RANGE ..............................................................................................59

EXAMPLE 2 : AC VOLTAGE 10V RANGE ..............................................................................................59

GENERAL MAINTENANCE ................................................................................................................60

ELECTRICAL SAFETY TESTS ................................................................................................................60

CLEANING THE EXTERNAL CASE...........................................................................................................60

GUARANTEE AND SERVICE...................................................................................................................61

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 6

8000 Series Multimeter Introduction

The 8000 series range of multimeters offer maximised capabilities from a highly accurate 4ppm /

9ppm advanced design. Utilising the precision electronics to their fullest extent, the 8000 Series

provides high performance core functionality combined with advanced operation modes in a single

instrument.

Main Features

 AC/DC Volts to 1025V

 AC/DC Current to 30 Amps

 AC/DC Low Current Measurement to 0.1pA (8081)

 2 and 4 Wire Resistance to 1 GOhm (8081)

 High Resistance Measurement to 1 TOhm (8081)

 Frequency

 Temperature Measurement (PRT / ITS90 / SPRT Co-efficient storage modes) (8081)

 Pressure Module Support : Measurement to 100Bar (8081)

 RS232 Serial Interface

 USB Interface

 GPIB (IEEE488) Interface

 Ethernet (LAN) Interface

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 7

Accuracy And Functionality

The 8000 Series multimeters are available in 2 accuracy grades - the 8081 4ppm model and the

8071 of 9ppm model. The appearance of these units is the same, however the model is indicated on

the front & rear panel and shown on the display on power up.

Multi Product Multimeter

Designed to provide an accurate cost effective portable instrument for the calibration of a wide range

of signal sources including pressure, temperature and more. The 8000 series multimeter is equally

suitable for use in the standards laboratory or for on site calibration work with a fast warm up time

combined with low weight and optional soft / hard carry cases. The multi –interface design allows

direct connection to desktop or laptop PCs via RS232, USB, GPIB or Ethernet.

Expandable Range of Pressure Modules

A range of pressure modules are available for support of pressure measurement up to 100 Bar

(optional pressure hand pump also available).

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 8

Multi Interface Support : Available As Standard.

All functions and ranges of the series 8000 multimeter are fully programmable over the multi

interfaces fitted as standard. The support of RS232, USB and Ethernet saves the cost of fitting GPIB

cards to the PC, and also allows easy connection to portable PC’s, reducing the set up time for on

site calibration. GPIB is also available where use of this type of interface is already implemented.

Output Connection

The input terminal configuration is designed to most input connections, e.g. volts/ohms, low current

and high current. Eliminating the need for lead changing during calibration. All outputs are isolated

when not in use, an LED indicator showing the active output pair.

8000 SERIES OPERATION MANUAL TRANSMILLE LTD.

TRANSMILLE LTD. PAGE 9

Preparing the Multimeter For Use.

Initial Inspection.

After shipment the multimeter should be inspected for any signs of external damage. Should external

damage be found contact the carrier immediately. Do not connect a damaged instrument to the line

power as this may result in internal damage. Please keep the original box which can be used when

returning the multimeter for service and recalibration.

Lifting and carrying the Multimeter

The multimeter can be carried easily by one person by supporting from underneath (note : observe

all normal practices for health and safety when carrying). A custom carry case with shoulder strap is

available if the multimeter is to be regularly transported - see options list. The multimeter should

always be placed down on a firm flat surface on its base feet. Avoid knocking or banging the

multimeter and always place down smoothly.

WARNING

DO NOT DROP THE MULTIMETER AS THIS MAY CAUSE INTERNAL DAMAGE.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Transmille Multimeter Handbücher

Transmille

Transmille 8100 Series Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung