Travis Industries 3003 Bedienungsanleitung

Travis 3003 User’s Manual

(Note: The User Manual is for Both Receiver and Transmitter)

(Receiver Model No: 3003TR / 3003TR RX)

This remote control SYSTEM offers the user a

battery-operated remote control that operates most

millivolt gas valves used in some heater rated gas

logs, gas fireplaces and other gas heating

appliances.

The transmitter operates on (2) 1.5V AAA batteries.

It is recommended that ALKALINE batteries

always be used for longer battery life and maximum

operational performance.

Before using the transmitter，install the (2) AAA

transmitter batteries into the battery compartment.

(Use caution that batteries are installed in the proper

direction)

Receiver

(Receiver Model No: 3003TR / 3003TR RX)

TO WORK WITH TRANSMITTER

Put the receiver’s plug in the socket. Connect the Fan / Light / Gas valves to the jack of Receiver

Use the transmitter to control the power on/off of Fan / Light / Gas valves.

KEY SETINGS

　MODE – Changes unit to ON / Thermo / OFF

mode position.

　UP / DOWN – Changes temperature, time(r) and

other functions’ value.

　TIMER / FAN / FLAME / LIGHT - Changes

each function to enable or disable.

　OK - Sets temperature, time(r) and other

functions.

LCD

1. ON / THERMO / OFF

Indicates current mode.

2. ROOM °F OR °C

Indicates current room temperature.

3. LIGHT

Indicates light/valve in operation.

4. AUX

Indicates auxiliary function

enable/disable..

5. FLAME

Indicates burner/valve in operation.

6. SET °F OR °C

Appears the desired temperature to indicate setting room temperature during the time of setting in the

thermo operation.

7. Battery icon

Indicates the battery is low or not.

8. FAN

Indicates fan/valve in operation.

9. TIMER / TIME

Appears the time and the countdown timer.

MANUAL FUNCTION

Initial Setup

Press the “ “ key and the “LIGHT” key on the transmitter at the same time. this will into the initial setup

mode. Each function scale setting is changed by “UP” or “DOWN” key.

1. Setting °F / °C Scale

The setting is for changing temperature °F / °C.

2. Setting Swing Scale

The setting is for swing temperature.

3. Setting Gas Type

The setting is for gas type NG / LP.

4. Setting Time

The setting is for time.

Mode

To operate the system in the manual “MODE” does the following.

ON OPERATION

Press the “MODE” key into the ON mode. The appliance flame and fan will come on. During this

time the screen will show ON. All the functions, FAN / FLAME / TIMER, will be active.

THERMO OPERATION

Press the “MODE” key into the THERMO mode. The transmitter will check the ROOM temperature

and SET temperature to decide the situation THERMO ON or THERMO OFF. After 2 seconds the LCD

screen will display the situation by temperature detected that is comparing with the SWING temperature

scale.

OFF OPERATION

Press the “MODE” key into the OFF mode. The appliance flame and fan will shut off. During this

time the screen will show OFF. All the functions, FAN / FLAME / TIMER, will be shut down exception of

LIGHT function.

THERMOSTAT FUNCTION

SETTING DESIRED ROOM TEMPERATURE

This remote control system can be thermostatically controlled when the transmitter is in the

THERMO mode. To set the THERMO MODE and DESIRED room temperature，

During the THERMO mode, Press “Up” / “DOWN” key the LCD screen set numbers will increase /

decrease between 45° and 99°(*) then loop the temperature.

THERMO ON situation

During this mode the screen will display the set flame/valve and fan/value at the same time enable the

functions setting.

THERMO OFF situation

During the situation the functions, FAN / FLAME / TIMER, will be shut down exception of LIGHT

function

NOTE: (*) The highest SET temperature is 99° Fahrenheit (32° Celsius) and the lowest temperature is (45°

Fahrenheit (6° Celsius)

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Notice 15.21

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Travis Industries Fernbedienung Handbücher

Travis Industries

Travis Industries 99300661 Bedienungsanleitung

Travis Industries

Travis Industries GS2/MV Bedienungsanleitung

Travis Industries

Travis Industries GreenSmart 2 Handbuch

Travis Industries

Travis Industries Cypress GS2 Bedienungsanleitung

Travis Industries

Travis Industries GreenSmart SKU 99300699 (NG) Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung