Traxxas Slash 4x4 Ultimate 68077 Bedienungsanleitung

owner’s manual

MODEL 68077

MODEL 6809L

2 •SLASH 4X4 ULTIMATE

INTRODUCTION

This manual contains the instructions you will need to operate and

maintain your model so that you can enjoy it for years to come. We want

you to feel conﬁdent that you own one of the best-performing models

in the market and that it is backed by a team of professionals who aim to

provide the highest level of factory support possible. Traxxas models are

about experiencing total performance and satisfaction, not just with your

model, but also with the company that stands behind it.

We know you’re excited about getting your new model on the road, but

it’s very important that you take some time to read through the Owner’s

Manual. This manual contains all the necessary set-up and operating

procedures that will allow you to unlock the performance potential that

Traxxas engineers designed into your model. Also be sure to read and

follow the precautions and warnings in this manual and on any labels or

tags attached to your model. They are there to educate you on how to

operate your model safely and also get maximum life and performance

from your model.

Even if you are an experienced R/C enthusiast, it’s important to read

and follow the procedures in this manual.

Thank you again for going with Traxxas. We work hard every day to

ensure you receive the highest level of customer satisfaction possible.

We truly want you to enjoy your new model!

Quick Start

This manual is designed with a Quick Start path

that outlines the necessary procedures to get

your model up and running in the shortest time possible. If you are an

experienced R/C enthusiast you will ﬁnd it helpful and fast. Be sure and

read through the rest of the manual to learn about important safety,

maintenance, and adjustment procedures. Turn to page 8 to begin.

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any accompanying

materials to prevent serious damage to your model. Failure to follow

these instructions will be considered abuse and/or neglect.

Before running your model, look over this entire manual and examine

the model carefully. If for some reason you decide it is not what you

wanted, then do not continue any further. Your hobby dealer absolutely

cannot accept a model for return or exchange after it has been run.

SUPPORT

If you have any questions about your model or its

operation, call the Traxxas Technical Support Line toll-free

at: 1-888-TRAXXAS (1-888-872-9927)*

Technical support is available Monday through Friday

from 8:30am to 9:00pm central time. Technical assistance

is also available at Traxxas.com/support. You may also e-mail customer

support with your question at [email protected]. Join thousands of

registered members in our online community at Traxxas.com.

Traxxas offers a full-service, on-site repair facility to handle any of your

Traxxas service needs. Maintenance and replacement parts may be

purchased directly from Traxxas by phone or online at BuyTraxxas.com.

You can save time, along with shipping and handling costs, by purchasing

replacement parts from your local dealer.

Do not hesitate to contact us with any of your product support needs.

We want you to be thoroughly satisﬁed with your new model!

*Toll-free support is available to U.S. residents only.

2BEFORE YOU

PROCEED

4SAFETY

PRECAUTIONS

6ANATOMY OF THE

SLASH 4x4 ULTIMATE

7TOOLS, SUPPLIES, AND

REQUIRED EQUIPMENT

8QUICK START:

GETTING UP TO SPEED

9TRAXXAS TQ

RADIO

AND VELINEON

BRUSHLESS POWER

SYSTEM

17 ADJUSTING THE

ELECTRONIC SPEED

CONTROL

19 DRIVING YOUR MODEL

22 BASIC TUNING

ADJUSTMENTS

24 MAINTAINING

YOUR MODEL

26 ADVANCED TUNING

ADJUSTMENTS

32 TQ

ADVANCED

TUNING GUIDE

TABLE OF CONTENTS

WARNINGS, HELPFUL HINTS, & CROSS-REFERENCES

Throughout this manual, you’ll notice warnings and helpful hints

identiﬁed by the icons below. Be sure to read them!

An important warning about personal safety or avoiding

damage to your model and related components.

Special advice from Traxxas to make things easier

and more fun.

Refers you to a page with a related topic.

REGISTERING YOUR MODEL

In order to serve you better as our customer, please register your

product within 10 days of your purchase online at Traxxas.com/register.

Traxxas.com/register

WHY IT’S THE ULTIMATE

The next-generation Slash 4X4 Ultimate represents Ready-To-Race® performance at the

highest level. The Slash 4X4 Ultimate pushes the performance envelope; its new Low-CG

chassis delivers superior handling and maximum corner speed and new 13mm bore GTR

hard-anodized aluminum shocks provide consistent damping and smooth suspension

action lap-after-lap. The result is lightning-fast steering response and smooth, consistent

damping that raises the bar even higher on Slash 4X4 handling and precise control.

The TQi Radio System with Docking Base and Slash 4X4 Ultimate’s factory-installed

telemetry enable real-time data capture and set the standard for tuning ease and versatility.

To truly make this the Ultimate Slash 4X4, the specs are completed with nearly every

factory option available, from aluminum suspension components to a sealed, silicone ﬁlled

differential. Simply put, it’s the best of the best.

Front and Rear Sway Bars

68077: Series 4 4200mAh NiMH Battery

6809L: 2-cell 5000mAh LiPo battery

SCT Tires with

S1 Racing Compound

(Style varies by model)

Optional Included

Center Differential

Traxxas

6200 Traxxas Way

McKinney, TX 75070

Phone: 972-549-3000

Toll-free 1-888-TRAXXAS

Internet:

Traxxas.com

E-mail:

[email protected]

Traxxas. Other brand names and marks are the property of their respective holders and are used only for purposes of identiﬁcation. No part of this

manual may be reproduced or distributed in print or electronic media without the express written permission of Traxxas. Speciﬁcations are subject to

change without notice.

Hard-Anodized PTFE

Coated GTR Shocks

Aluminum Rear Hub Carriers

Aluminum C-hubs and Steering Blocks Aluminum Wheel nuts

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the instructions, may cause

harmful interference to radio communications. The user is cautioned that changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept

any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Statement

This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or

bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.

4 •SLASH 4X4 ULTIMATE

This model is not intended

for use by children under

14 years of age without the

supervision of a responsible

and knowledgeable adult.

Gearing and battery choice

(see LiPo Batteries, right)

affect the skill level of the

model. See chart below.

All instructions and

precautions outlined in this

manual should be strictly

followed to ensure safe

operation of your model.

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. Operate your

model sensibly and with care, and it will be exciting, safe, and fun for you and

those around you. Failure to operate your model in a safe and responsible

manner may result in property damage and serious injury. The precautions

outlined in this manual should be strictly followed to help ensure safe

operation. You alone must see that the instructions are followed and the

precautions are adhered to.

Important Points to Remember

• Your model is not intended for use on public roads or congested areas where

its operation can conﬂict with or disrupt pedestrian or vehicular trafﬁc.

• Never, under any circumstances, operate the model in crowds of people. Your

model is very fast and could cause injury if allowed to collide with anyone.

• Because your model is controlled by radio, it is subject to radio interference

from many sources that are beyond your control. Since radio interference can

cause momentary losses of radio control, always allow a safety margin in all

directions around the model in order to prevent collisions.

• The motor, battery, and speed control can become hot during use. Be careful

to avoid getting burned.

• Don’t operate your model at night, or anytime your line of sight to the model

may be obstructed or impaired in any way.

• Most importantly, use good common sense at all times.

Speed Control

Your model’s electronic speed control (ESC) is an extremely powerful

electronic device capable of delivering high current. Please closely follow these

precautions to prevent damage to the speed control or other components.

• Disconnect the Battery: Always disconnect the battery or batteries from the

speed control when not in use.

• Insulate the Wires: Always insulate exposed wiring with heat shrink tubing to

prevent short circuits.

• Water and Electronics Do Not Mix: The speed control is waterproof for use

in mud, snow, puddles, and other wet conditions. Make certain the other

components of your model are waterproof or have sufﬁcient water resistance

before driving in wet conditions.

• Transmitter on First: Switch on your transmitter ﬁrst before switching on the

speed control to prevent runaways and erratic performance.

• Don’t Get Burned: The ESC and motor can become extremely hot during use,

so be careful not to touch them until they cool. Supply adequate airﬂow for

cooling.

• Use the Factory-Installed Stock Connectors: Do not change the battery and

motor connectors. Improper wiring can cause ﬁre or damage to the ESC.

Please note that modiﬁed speed controls can be subject to a rewiring fee

when returned for service.

• No Reverse Voltage: The ESC is not protected against reverse polarity voltage.

• Always adhere to the minimum and maximum limitations of the speed

control as stated in the speciﬁcations table on page 17. If your ESC operates on

two batteries, do not mix battery types and capacities. Use the same voltage

and capacity for both batteries. Using mismatched battery packs could

damage the batteries and electronic speed control.

LiPo Batteries

Lithium Polymer (LiPo) batteries are becoming popular for use in R/C models

due to their compact size, high energy density, and high-current output;

however, these types of batteries require special care and handling procedures

for long life and safe operation. WARNING: LiPo batteries are intended

only for advanced users that are educated on the risks associated with

LiPo battery use. Traxxas does not recommend that anyone under the

age of 14 use or handle LiPo battery packs without the supervision of a

knowledgeable and responsible adult.

Your model is able to use LiPo batteries. LiPo batteries have a minimum safe

discharge voltage threshold that should not be exceeded. The electronic speed

control is equipped with built-in Low-Voltage Detection, which alerts the

driver when LiPo batteries have reached their minimum voltage (discharge)

threshold. It is the driver’s responsibility to stop immediately to prevent the

battery pack from being discharged below its safe minimum threshold.

Gearing: Stock Pinion

Battery: 7-Cell NiMH

Voltage*: 8.4V

mAh: 3000+mAh

Gearing: Opt. Pinion

Battery: 7-Cell NiMH

Voltage*: 8.4V

mAh: 3000+mAh

Gearing: Stock Pinion

Battery: 3S 20C LiPo

Voltage*: 11.1V

mAh: 5000+ mAh

Gearing: Opt. Gearing

Battery: 3S 20C LiPo

Voltage*: 11.1V

mAh: 5000+ mAh

*Nominal

See the gearing chart on

page 26 for more information.

WARNING! CAUTION! DANGER!

FIRE HAZARD! Charging and discharging batteries has the potential for

ﬁre, explosion, serious injury, and property damage if not performed per the

instructions. In addition, Lithium Polymer (LiPo) batteries pose a SEVERE risk of

ﬁre if not properly handled per the instructions. Before use, read and follow all

manufacturer’s instructions, warnings, and precautions. Never allow children under 14 years old

to charge or use LiPo batteries without the supervision of a responsible, knowledgeable adult.

• While charging or discharging, ALWAYS place the battery (all types of batteries) in a ﬁre

retardant/ﬁre proof container and on a non-ﬂammable surface such as concrete.

• ALWAYS charge batteries in a well-ventilated area.

• REMOVE ﬂammable items and combustible materials from the charging area.

• ONLY use a LiPo balance charger with a balance adapter to charge LiPo batteries.

• If any battery or cell is damaged in any way, DO NOT charge, discharge, or use the battery.

• BEFORE you charge, ALWAYS conﬁrm that the charger settings exactly match the battery

type (chemistry), speciﬁcation, and conﬁguration to be charged.

• DO NOT exceed the maximum manufacturer recommended charge rate.

• DO NOT disassemble, crush, short circuit, or expose the batteries to ﬂame or other sources

of ignition.

• NEVER leave batteries unattended while charging.

SLASH 4X4 ULTIMATE •5

Low-Voltage Detection on the speed control is just one part of a

comprehensive plan for safe LiPo battery use. It is critical for you,

the user, to follow all other instructions supplied by the battery

manufacturer and the charger manufacturer for proper charging,

use, and storage of LiPo batteries. Make sure you understand

how to use your LiPo batteries. Be aware that Traxxas shall not

be liable for any special, indirect, incidental, or consequential

damages arising out of the installation and/or use of LiPo batteries

in Traxxas models. If you have questions about LiPo battery usage,

please consult with your local hobby dealer or contact the battery

manufacturer. As a reminder, all batteries should be recycled at the

end of their useful life.

product. Traxxas, its afﬁliates, manufacturers, distributors, and retail

partners cannot control the use, application, charging, or installation

of this product and shall not be held responsible for any accident,

injury to persons, or damage to property resulting from the use of

this product.

After reading all, if you do not agree with these terms and conditions

and are not prepared to accept complete liability for the use of this

product, return this product immediately in new/unused condition

to your place of purchase. Your retailer absolutely cannot accept

product for return or exchange if it has been used in any way.

If you have any questions, call Traxxas Customer Support at

1-888-TRAXXAS (1-888-872-9927). Outside the US, call +1-972-265-

8000 or e-mail [email protected].

Important Warnings for users of Lithium Polymer (LiPo)

batteries: Lithium Polymer (LiPo) batteries are signiﬁcantly

more volatile than other rechargeable batteries.

ONLY use a Lithium Polymer (LiPo) balance charger with a balance

adapter to charge LiPo batteries, such as the Traxxas EZ-Peak Plus

Charger, part #2933, or the 2-Cell/3-Cell LiPo Balance Charger.

Never use NiMH or NiCad-type chargers or charge modes to charge

LiPo batteries. The use of a NiMH or NiCad charger or charge mode

will damage the batteries and may cause ﬁre and personal injury.

Never charge LiPo battery packs in series or parallel with this

charger. Charging packs in series or parallel may result in improper

charger cell recognition and an improper charging rate that may

lead to overcharging, cell imbalance, cell damage, and ﬁre.

• ALWAYS inspect your LiPo batteries carefully before charging.

Look for any loose leads or connectors, damaged wire insulation,

damaged cell packaging, impact damage, ﬂuid leaks, swelling (a

sign of internal damage), cell deformity, missing labels, or any other

damage or irregularity. If any of the above conditions are observed,

do not charge or use the battery pack.

• Do not store or charge LiPo batteries with or around other batteries

or battery packs of any type, including other LiPos.

• Store and transport your LiPo batteries in a cool, dry place. Do not

store in direct sunlight. Do not allow the storage temperature to

exceed 140°F or 60°C or the cells may be damaged and risk of ﬁre

created.

• DO NOT disassemble LiPo batteries or cells.

• DO NOT attempt to build your own LiPo battery pack from loose

cells.

• ALWAYS proceed with caution and use good common sense at all

times.

Charging and Handling Precautions/Warnings

• ALWAYS proceed with caution and use good common sense at all

times.

• Children require adult supervision while using this charger.

• DO NOT let any exposed battery contacts or wires touch each other.

This will cause the battery to short circuit and create the risk of ﬁre.

• While charging, ALWAYS place the battery (all types of batteries) in

a ﬁre retardant/ﬁre proof container and on a non-ﬂammable surface

such as concrete.

• NEVER charge batteries on wood, cloth, carpet, or on any other

ﬂammable material.

• ALWAYS charge batteries in a well-ventilated area.

• REMOVE ﬂammable items and combustible materials from the

charging area.

• DO NOT operate the charger in a cluttered space or place objects on

top of the charger or battery.

• If any battery or battery cell is damaged in any way, DO NOT charge,

discharge, or use the battery.

• Keep a Class D ﬁre extinguisher nearby in case of ﬁre.

• BEFORE you charge, ALWAYS conﬁrm that the charger settings

exactly match the type (chemistry), speciﬁcation, and conﬁguration

of the battery to be charged.

• DO NOT use the 2-3 cell LiPo charger, part #2935, to charge NiMH

batteries.

• DO NOT exceed the battery manufacturer’s maximum

recommended charge rate.

• DO NOT disassemble, crush, short circuit, or expose the batteries or

cells to ﬂame or any other source of ignition.

• If a battery gets hot to the touch (temperature greater than

110°F/43°C) during the charging process, immediately disconnect

the battery from the charger and discontinue charging.

• DO NOT leave the charger and battery unattended while charging,

discharging, or anytime the charger is ON with a battery connected.

If there are any signs of a malfunction, unplug the power source

and/or stop the charging process immediately.

• ALWAYS unplug the charger from the wall outlet and disconnect

the battery when not in use.

• DO NOT operate the charger inside of an automobile.

• AVOID short-circuits by always connecting the charge cable to

the charger ﬁrst and then to the battery to charge or discharge.

Remember to always reverse this procedure when disconnecting

the battery.

• NEVER connect more than one battery at a time to the charger.

• DO NOT disassemble the charger.

• REMOVE the battery from your model or device before charging.

• DO NOT expose the charger to water or moisture.

• ALWAYS store battery packs safely out of the reach of children and

pets.

• DO NOT charge batteries if you observe ANY of the following

conditions:

- Batteries that are fully charged or have been only slightly

discharged.

- Batteries that are hot (temperature greater than 110°F/43°C)

- Batteries that are not expressly stated by the manufacturer to be

suitable to accept the power output (voltage and amperage) the

charger delivers during the charging process.

- Batteries that are damaged or defective in any way. Examples of

damage or defects include, but are not limited to: batteries with

dented cells, damaged or frayed wires, loose connections, ﬂuid

leaks, corrosion, plugged vents, swelling, cell deformity, impact

damage, missing labels, melted components, or any other signs of

damage.

- Battery packs that have been altered from original manufacturer

conﬁguration.

- Non-rechargeable batteries (explosion hazard)

- Batteries that have an internal charge circuit or a protection circuit.

SAFETY PRECAUTIONS

Motor

(Velineon 3500)

Rear Hub

Carrier

Rear Bumper

Slipper Clutch

RPM Sensor Wire

Motor Temperature Sensor Battery Voltage Sensor Wire

Electronic Speed

Control (VXL-3s)

Battery Compartment

Nerf Bar

LED Light

Pipe

Battery Hold-Down

Battery

(LiPo battery standard on

Model 6809L only. 68077

includes Series 4 NiMH battery)

Receiver Box

Antenna

Mount

Front Suspension

Arm

Front Bumper

Steering

Servo

Shock

(Damper)

Turnbuckle (Toe Link)

Turnbuckle

(Front Camber Link)

Turnbuckle

(Rear Camber Link)

Rear Shock Tower

Traxxas High-Current

Connector

Rear Body Mount

Rear Sway Bar

Chassis

Steering Block

(Axle Carrier)

Caster Block

(C-Hub)

Front Body Mount

Front

Sway Bar

Front

Shock Tower

Drive

Shaft

Half Shaft

Rear Suspension Arm

Half Shaft

6 •SLASH 4x4 ULTIMATE

ANATOMY OF THE SLASH 4X4 ULTIMATE

SLASH 4X4 ULTIMATE •7

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Recommended Equipment

These items are not required

for the operation of your

model, but are a good idea to

include in any R/C toolbox:

• Safety glasses

• Traxxas Ultra Premium Tire

Glue, Part #6468 (CA glue)

• Hobby knife

• Side cutters and/or needle

nose pliers

• Philips screwdriver

• Soldering iron

For more information on

batteries, see Use the Right

Batteries on page 12.

Body clips and

body washers

Optional

pinion gear

Foam battery spacer

for use with

LiPo batteries

Suspension multi-tool Optional center

differential

Shock wrench

Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate

and maintain your model.

2.0mm “L” wrench 1.5mm “L” wrench 4-way wrenchU-joint wrench

Supplied Tools and Equipment

Required Equipment #68077; #6809L

Battery charger*

LiPo battery*

Batteries packaged separately.

Ask your dealer for details.

#6809L#68077

*Battery and charger style are subject to change and may vary from images.

7-cell NiMH battery pack* NiMH battery charger*

2.5mm “L” wrench 8mm/4mm wrench

8 •SLASH 4X4 ULTIMATE

QUICK START: GETTING UP TO SPEED

The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom

corners of Quick Start pages.

1. Read the safety precautions on page 4 6. Check servo operation • See page 15

For your own safety, understand where carelessness and misuse

could lead to personal injury and product damage.

Make sure the steering servo is working correctly.

2. Charge the battery pack • See pages 12 & 13 7. Range test the radio system • See page 15

Fully charge the included battery pack. Begin charging

your battery right away.

Follow this procedure to make sure your radio system works properly at

a distance and that there is no interference from outside sources.

3. Install batteries in the transmitter • See page 12 8. Detail your model • See sidebar, page 9

The transmitter requires 4 AA alkaline batteries (sold separately). Apply other decals if desired.

4. Install the battery pack in the model • See page 13 9. Drive your model • See page 19

Your model requires a fully charged battery pack. Driving tips and adjustments for your model.

5. Turn on the radio system • See page 14 10. Maintaining your model • See page 24

Make a habit of turning the transmitter on ﬁrst and off last. Follow these critical steps to maintain the performance

of your model and keep it in excellent running condition.

The Quick Start Guide is

not intended to replace the

full operating instructions

available in this manual.

Please read this entire

manual for complete

instructions on the proper

use and maintenance of

your model.

Look for the Quick Start

logo at the bottom of

Quick Start pages.

SLASH 4X4 ULTIMATE •9

TRAXXAS TQ

RADIO & VELINEON POWER SYSTEM

INTRODUCTION

Your model includes the latest Traxxas TQi 2.4GHz transmitter with

Traxxas Link™ Model Memory. The transmitter’s easy-to-use design

provides instant driving fun for new R/C enthusiasts, and also offers

a full compliment of pro-level tuning features for advanced users

– or anyone interested in experimenting with the performance of

their model. The steering and throttle channels feature adjustable

Exponential, End Points, and Sub-Trims. Steering and braking Dual

Rate are also available. Many of the next-level features are controlled

by the Multi-Function knob, which can be programmed to control

a variety functions. The detailed instructions (page 32) and Menu

Tree (page 35) included in this manual will help you understand and

operate the advanced functions of the new TQi radio system. For

additional information and how-to videos, visit Traxxas.com.

RADIO AND POWER SYSTEM TERMINOLOGY

Please take a moment to familiarize yourself with these radio and

power system terms. They will be used throughout this manual.

A detailed explanation of the advanced terminology and features of

your new radio system begins on page 32.

2.4GHz Spread Spectrum – This model is equipped with the latest

R/C technology. Unlike AM and FM systems that require frequency

crystals and are prone to frequency conflicts, the TQi system

automatically selects and locks onto an open frequency and offers

superior resistance to interference and “glitching.”

BEC (Battery Eliminator Circuit) - The BEC can either be in the

receiver or in the ESC. This circuit allows the receiver and servos

to be powered by the main battery pack in an electric model. This

eliminates the need to carry a separate pack of 4 AA batteries to

power the radio equipment.

Brushless Motor - A D/C brushless motor replaces the brushed motor’s

traditional commutator and brush arrangement with intelligent

electronics that energize the electromagnetic windings in sequence

to provide rotation. Opposite of a brushed motor, the brushless

motor has its windings (coils) on the perimeter of the motor can and

the magnets are mounted to the spinning rotor shaft.

Cogging - Cogging is a condition sometimes associated with

brushless motors. Typically it is a slight stutter noticed when

accelerating from a stop. It happens for a very short period as the

signals from the electronic speed control and the motor synch

with each other. The VXL-3s electronic speed control is optimized

to virtually eliminate cogging.

Current - Current is a measure of power ﬂow through the

electronics, usually measured in amps. If you think of a wire as a

garden hose, current is a measure of how much water is ﬂowing

through the hose.

ESC (Electronic Speed Control) - An electronic speed control is the

electronic motor control inside the model. The VXL-3s electronic

speed control uses advanced circuitry to provide precise, digital

proportional throttle control. Electronic speed controls use power

more efﬁciently than mechanical speed controls so that the

batteries run longer. An electronic speed control also has circuitry

that prevents loss of steering and throttle control as the batteries

lose their charge.

Frequency band - The radio frequency used by the transmitter to

send signals to your model. This model operates on the 2.4GHz

direct-sequence spread spectrum.

kV Rating - Brushless motors are often rated by their kV number. The

kV rating equals no-load motor rpm with 1 volt applied. The kV

increases as the number of wire turns in the motor decreases. As the

kV increases, the current draw through the electronics also increases.

The Velineon 3500 motor is a 3500 kV motor optimized for the best

speed and efﬁciency in lightweight 1/10 scale models.

LiPo - Abbreviation for Lithium Polymer. Rechargeable LiPo battery

packs are known for their special chemistry that allows extremely

high energy density and current handling in a compact size. These

are high-performance batteries that require special care and

handling. For advanced users only.

mAh – Abbreviation for milliamp hour. A measure of the capacity of

the battery pack. The higher the number, the longer the battery

will last between recharges.

Neutral position - The standing position that the servos seek when

the transmitter controls are at the neutral setting.

NiCad - Abbreviation for nickel-cadmium. The original rechargeable

hobby pack, NiCad batteries have very high current handling, high

capacity, and can last up to 1000 charging cycles. Good charging

procedures are required to reduce the possibility of developing a

“memory” effect and shortened run times.

Applying the Decals

The main decals for your

model have been applied at

the factory. Additional decals

are printed on self-adhesive

clear mylar and are die-cut for

easy removal. Use a hobby

knife to lift the corner of a decal

and lift it from the backing.

To apply the decals, place one

end down, hold the other end

up, and gradually smooth the

decal down with your ﬁnger

as you go. This will prevent air

bubbles. Placing both ends of

the decal down and then trying

to smooth it out will result in

air pockets. Look at the photos

on the box for typical decal

placement.

10 •SLASH 4X4 ULTIMATE

TRAXXAS TQ

RADIO & VELINEON POWER SYSTEM

NiMH - Abbreviation for nickel-metal hydride. Rechargeable NiMH

batteries offer high current handling and much greater resistance

to the “memory” effect. NiMH batteries generally allow higher

capacity than NiCad batteries. They can last up to 500 charge

cycles. A peak charger designed for NiMH batteries is required for

optimal performance.

Receiver - The radio unit inside your model that receives signals from

the transmitter and relays them to the servos.

Resistance - In an electrical sense, resistance is a measure of how an

object resists or obstructs the ﬂow of current through it. When ﬂow

is constricted, energy is converted to heat and is lost. The Velineon

power system is optimized to reduce electrical resistance and the

resulting power-robbing heat.

Rotor - The rotor is the main shaft of the brushless motor. In a

brushless motor, the magnets are mounted to the rotor, and the

electromagnetic windings are built into the motor housing.

Sensored - Sensored refers to a type of brushless motor that

uses an internal sensor in the motor to communicate rotor position

information back to the electronic speed control. The VXL-3s electronic

speed control is able to use sensored motors when applications beneﬁt

from them (such as some sanctioned racing classes).

Sensorless - Sensorless refers to a brushless motor that uses

advanced instructions from an electronic speed control to provide

smooth operation. Additional motor sensors and wiring are not

required. The VXL-3s electronic speed control is optimized for

smooth sensorless control.

Servo - Small motor unit in your model that operates the steering

mechanism.

Solder Tabs - Accessible, external contacts on the motor that allows

for easy wire replacement. The Velineon 3500 is equipped with

solder tabs.

Transmitter - The hand-held radio unit that sends throttle and

steering instructions to your model.

Trim - The ﬁne-tuning adjustment of the neutral position of the

servos made by adjusting the throttle and steering trim knobs on

the face of the transmitter. Note: The Multi-Function knob must be

programmed to serve as a throttle trim adjustment.

Thermal Shutdown Protection - Temperature sensing electronics

used in the VXL-3s electronic speed control detect overloading and

overheating of the transistor circuitry. If excessive temperature is

detected, the unit automatically shuts down to prevent damage to

the electronics.

2-channel radio system - The TQi radio system, consisting of

the receiver, the transmitter, and the servos. The system uses

two channels: one to operate the throttle and one to operate

the steering.

Voltage - Voltage is a measure of the electrical potential difference

between two points, such as between the positive battery terminal

and ground. Using the analogy of the garden hose, while current is

the quantity of water ﬂow in the hose, voltage corresponds to the

pressure that is forcing the water through the hose.

IMPORTANT RADIO SYSTEM PRECAUTIONS

• Do not kink the receiver’s antenna wire. Kinks in the antenna wire

will reduce range.

• DO NOT CUT any part of the receiver’s antenna wire. Cutting the

antenna will reduce range.

• Extend the antenna wire in the model as far as possible for

maximum range. It is not necessary to extend the antenna wire out

of the body, but wrapping or coiling the antenna wire should be

avoided.

• Do not allow the antenna wire to extend outside the body without

the protection of an antenna tube, or the antenna wire may get

cut or damaged, reducing range. It is recommended to keep the

wire inside the body (in the antenna tube) to prevent the chance

of damage.

To prevent loss of radio range

do not kink or cut the black wire,

do not bend or cut the metal tip,

and do not bend or cut the white

wire at the end of the metal tip.

Correct NoNo No

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Traxxas ferngesteuertes Auto Handbücher

Traxxas

Traxxas Stampede 4x4 VXL 67086-1 Bedienungsanleitung

Traxxas

Traxxas T-MAXX 49104-1 Bedienungsanleitung

Traxxas

Traxxas Slash 4x4 70054-1 Bedienungsanleitung

Traxxas

Traxxas Nitro Stampede 41094-1 Bedienungsanleitung

Traxxas

Traxxas F-150 Raptor SVT 58064-1 Bedienungsanleitung

Traxxas

Traxxas Revo 3.3 53097-1 Bedienungsanleitung

Traxxas

Traxxas Slash Robby Gordon 58044-1 Bedienungsanleitung

Traxxas

Traxxas Stampede 4x4 67054-1 Bedienungsanleitung

Traxxas

Traxxas Telluride 4x4 67044-1 Bedienungsanleitung

Traxxas

Traxxas Nitro rustler 44096-3 Bedienungsanleitung

Traxxas

Traxxas E REVO 56087-1 Bedienungsanleitung

Traxxas

Traxxas 56086-4 Bedienungsanleitung

Traxxas

Traxxas Nitro Slash 44054-1 Bedienungsanleitung

Traxxas

Traxxas Jato 3.3 55077 Bedienungsanleitung

Beliebte ferngesteuertes Auto Handbücher anderer Marken

LaTrax

LaTrax 76044-1 Bedienungsanleitung