TREBLAB Z7 PRO Bedienungsanleitung

User’s Manual
Please read this manual
before using the product
HYBRID ACTIVE NOISE
CANCELLATION

IN THE BOX
1. TREBLAB Z7 Pro headphones
2. User's manual
3. Round TREBLAB sticker
4. Carrying case
5. Charging USB Type-C cable
6. 3.5 mm audio cable
1.
5.
2.
3.
4.
6.
Z7 Pro

Thank you for choosing TREBLAB Z7 Pro!
The over-ear headphones with Bluetooth® 5.0 Aptx™ HD and
Hybrid Active Noise Cancellation technology provide superior
sound quality and the convenience of hands-free operation.
POWER
BUTTON
ANC
BUTTON
CHARGING
LED
TYPE-C
CHARGING PORT
BLUETOOTH
BUTTON
AUX LINE-IN
PORT
STATUS
LED
MAIN
MICROPHONE

ANC
MICROPHONES
2X
ENC
MICROPHONES
RIGHT SIDE
TOUCH PANEL

Function
Power on
Power off
Battery level
Discon-
nect/Pairing
Play/Pause
Volume +
Volume -
Next track
Previous track
Answer
a phone call
Reject a phone
call
End a phone
call (Hang up)
Voice assistant
activation
Operation
Press and hold the POWER button for 3 sec.
Press and hold the POWER button for 4 sec.
Press the POWER button while the headset is on.
Press and hold the Bluetooth button for 3 sec.
Double tap on the Touch panel.
Swipe up on the Touch panel.
Swipe down on the Touch panel.
Swipe forward on the Touch panel.
Swipe backward on the Touch panel.
Double tap on the Touch panel during the
incoming call.
Tap and hold on the Touch panel for 3 sec
during the incoming call.
Double tap on the Touch panel during the
conversation.
Tap and hold on the Touch panel for 3 sec
(not during a call).

SETTING UP YOUR TREBLAB Z7 Pro
Turn ON
Press the POWER button for 3 sec. You will hear the sound
prompt and, a few seconds later, the “Bluetooth pairing on”
voice prompt. The LED on the right earcup will turn blue and
then will start flashing blue/red. In case the headphones have
been previously connected to the smart device, instead of
“Bluetooth pairing on”, you will hear the “Connected” voice
prompt and the LED will start flashing blue/green slowly.
Turn off
Press and hold the POWER button for 4 sec. You will hear the “Power
off” voice prompt. The blue LED will light up for a second and will go off.
Function
Enable Ambient
Sound mode
Enable ANC
Disable
Ambient Sound
and ANC modes
Awareness
mode
Operation
When ANC mode is on, press the ANC button
once.
When the ANC and Ambient Sound modes
are off, press the ANC button once.
When the Ambient Sound mode is on, press
the ANC button once.
When the headphones are turned on, close
the right earcup with a palm.

PAIRING
Make sure the TREBLAB Z7 Pro are charged and the 3.5 mm
audio cable is not plugged in.
Press the POWER button for 3 sec. You will hear the sound
prompt and, a few seconds later, the “Bluetooth pairing on”
voice prompt. The LED on the right earcup will turn blue and
then start flashing blue/red indicating that Z7 Pro are in the
pairing mode.
Activate the Bluetooth option on your smart device and
keep it within 3 feet/1 meter from the TREBLAB Z7 Pro
while pairing.
Scan/search for available devices in your smart device.
Select TREBLAB Z7 Pro from the device list.
If the password is prompted, enter "0000”.
Once the Z7 Pro are successfully paired and connected,
you will hear the “Connected” voice prompt, and the LED
will start flashing blue/green slowly.
You can unpair with the current device and enter the pairing
mode manually at any time by pressing and holding the
Bluetooth button for 3 sec.
1.
2.
3.
4.
5.
6.

1.
2.
3.
MULTIPOINT CONNECTION
The TREBLAB Z7 Pro headphones have a multipoint connec-
tion. It allows two devices to be connected at the same time.
While you won't receive the input from both devices at the
same time, you'll be able to switch from one device to another
seamlessly.
To connect the Z7 Pro to the second device:
Switch off temporarily the wireless mode on the first device
the headphones are connected to.
Repeat pairing steps 2-6 to connect the second device.
Turn on the Bluetooth mode back for the first device and
connect the Z7 Pro again.
When you turn the headphones on, they will try to reconnect
to the recently connected device/devices. If the reconnection
does not happen automatically, the headphones will try to find
the next device in the pairing list. The headphones can save
the last 8 devices.
ANC/AMBIENT SOUND MODES
The TREBLAB Z7 Pro headphones feature Hybrid Active Noise
Cancellation technology. This technology provides the ability
not only to decrease the surrounding noise in the ANC mode

but also to amplify some frequencies in the Ambient Sound
mode to hear voices when using the Z7 Pro headphones.
When the Z7 Pro are turned on, the ANC mode is enabled
automatically. In the ANC mode the green LED on the right
earcup is lit up. To switch to the Ambient Sound mode, press
the ANC button once. You will hear the “Ambient sound” voice
prompt and the LED on the right earcup will change to white.
To disable both ANC and Ambient Sound modes, press the
ANC button once again. You will hear the “Ambient sound and
noise cancelling off” voice prompt and the white LED light on
the right earcup will go off.
NOTE:
Keep the dedicated ANC microphone holes on both earcups
unblocked when using the ANC/Ambient Sound functions.
AWARENESS MODE
When you listen to music and some person approaches you to
talk, you can fastly lower the music volume to the minimum and
activate the Ambient Sound feature to keep the conversation
going. To do so, cover the right earcup with a palm. Once you re-
lease the earcup, the music will go back to the previous volume
level and the Ambient Sound feature will be disabled.

AUX LINE-IN CONNECTION
You can connect the TREBLAB Z7 Pro to compatible devices
using the supplied 3.5 mm audio cable.
Plug one end of the 3.5 mm audio cable into the AUX LINE-IN
port on the right earphone and plug the other end into the AUX
LINE-IN port on your device.
In the AUX mode, you can also use the ANC/Ambient sound
features + adjust the volume. To do so, turn on the headphones
by pressing and holding the POWER button for 3 sec. Keep in
mind that in such case the inbuilt battery will still be drained.
NOTE:
NEXT, PREVIOUS, PLAY/PAUSE controls are not supported in
the AUX mode. You will need to make these adjustments using
your smart device.
AUDIO PLAYBACK
The TREBLAB Z7 Pro headphones are equipped with a highly
responsive Touch panel on the right earcup.
To pause and resume the playback when connected wirelessly,
double-tap on the Touch panel.
To adjust the volume, swipe up on the Touch panel to raise
the volume and swipe down to lower the volume.
To change tracks on the Z7 Pro headphones, swipe forward on
the Touch panel to play the next track and swipe backward
to play the previous track.
Andere Handbücher für Z7 PRO
1
Inhaltsverzeichnis
Andere TREBLAB Kabellose Kopfhörer Handbücher


















