Trend Micro TxOne Networks EdgeIPS Bedienungsanleitung

EdgeIPS

Quick Setup Guide

EdgeIPS is a Transparent Security Box fitted with dual Ethernet LAN ports. Users

can efficiently adapt the palm-sized EdgeIPS into a flexible solution for the

challenges of Ethernet communications.

1. Opening and Inspecting the Package

Verify that the EdgeIPS package contains the following items:

2. Examining the EdgeIPS

3. Deployment Checklist

4. Deployment Scenario and System Operation Mode

Requirement

Details

Ethernet Cables

- Connect to the port 1 for accessing web console management.

- Connect to the port 2 to swtich or filed device.

Default IPAddress of

web console

Default web console access information:

https://192.168.127.254

User name: admin

Password: txone

Laptop with Ethernet

Port (RJ-45 Type)

The computer must have one of the following browsers installed:

- Microsoft Edge (version 15 or above)

- Firefox (version 53 or above)

- Safari (version 10.1 or above)

- Google Chrome (version 63 or above)

Mode

Description

Inline mode

In inline mode, EdgeIPS is installed directly in the path of traffic.

Offline mode

In offline mode, EdgeIPS connects to a mirror port of network switch and

mirrors traffic to itself.

EdgeIPS Front Panel

EdgeIPS Back Panel

EdgeIPS Appliance

Console Cable (USB-Type-C) x1

Terminal Block x 1

Documents

DIN Rail mount kit (assembled to EdgeIPS)

5. LED Indicators

The function of each LED is described in the table below

LED Name

Status

Function

PWR1

Amber

Power 1 is ON

Off

Power 1 is OFF

PWR2

Amber

Power 2 is ON

Off

Power 2 is OFF

MANAGED

Green

OT Defense Console Sync (ODC) is

enabled and ODC is connected

Off

OT Defense console sync is disabled

IPS/IDS

Green

IPS and IDS enabled

Off

IPS and IDS disabled

USB/F

Green

LED will be turned on when USB is plugged

Red

Hardware or system fault

Blinking

USB data transmission

BYPASS

Amber

Hardware bypass mode enabled

Off

Hardware bypass mode disabled

6. Reset to factory default setting

The reset button for the EdgeIPS is located on the front panel.

Reset type

Description

Reboot System

Press and hold the reset button for 2 to 10 seconds. The MANAGED LED will begin

to blink on a 1-second pattern, which means the system is rebooting.

Restore Factory

Default Settings

Press and hold the reset button for more than 10 seconds. The MANAGED LED will

begin to blink every half-second, which means the system is resetting itself to

factory defaults.

7. Installing the EdgeIPS

DIN Rail Mounting

The aluminum DIN Rail attachment plate should already be fixed to the back panel of

the EdgeIPS when you take it out of the box. If you need to reattach the DIN Rail

attachment plate to the EdgeIPS, make sure the stiff metal spring is oriented towards

the top, as shown in the following pictures.

8. Wriing the Redundant Power Inputs

The Trend Micro EdgeIPS has two sets of power inputs –power input1 and power input2. The

top and side views of the terminal block connector are shown below.

STEP 1:

Open the terminal block’s wire locks by pushing the buttons down.

STEP 2:

Insert a positive / negative DC wire into the V+/V- terminals

respectively.

STEP 3:

When the wire is properly seated, the wire lock will be forced shut

around it. Check whether the wire is properly fixed.

9. Connecting the Power

Connect the 12 to 48 VDC power line to the terminal block, which is connected to the EdgeIPS

device. If the power is supplied properly, the “Power” LED will glow steadily. The power input

location and pin definition are shown in the following diagram.

10. Grounding the Unit

Grounding and wire routing help limit the effects of noise due to electromagnetic interference

(EMI). Run the ground connection from the terminal block connector to the grounding surface

prior to connecting the power. Please note that this product is intended to be mounted on a

well-grounded mounting surface, such as a metal panel. The minimum cross-sectional area of

the conductor must be equal to the input wiring cable’s width/circumference.

11. Software Configuration

Before connecting the PC/Laptop to EdgeIPS, the PC's IP address should be set to

192.168.127.100. After that, connect the PC and EdgeIPS using an Ethernet cable. Open a

web browser on your PC and type “https://192.168.127.254” into the address bar. A pop-up

window will open to ask for user name and password. Please type the default username,

“admin”, and password, “txone”.

Now, the main screen will pop up so you can configure EdgeIPS.

12. Setting the Management IP Address

1. Go to [Device] > [Device Setting]

2. In the [Network Setting] plane, configure management IP address for EdgeIPS

Task

Action

Device IP Address

Configure Management IP Address of the EdgeIPS

Netmask

Configure Netmask of the EdgeiPS

Gateway

Confiture GatewayAddress of the EdgeIPS

DNS

Configure DNS setting of the EdgeIPS

Network VLAN-ID

Configure Network VLAN-ID of the device

13. Connecting to the Network

EdgeIPS’s ports 1 and 2 make up a network segment.

1. Port 1 is a “mixed” port design, functioning both as the management console port and to

connect to a network node, so EdgeIPS’s Port 1 can be connected either to your network

switch/hub or to a laptop. Connecting this port to the network enables remote management

of the device.

2. EdgeIPS’s Port 2 links the IPS to the device or small production zone you are targeting for

protection.

14. Checking the LED to Confirm Status

The LED on each Ethernet port shows the deployment status.

RJ45 LED Indication

Status

No Light

The EdgeIPS appliance cannot communicate with a

network.

Left LED0:(Green)

GE LNK/ACT (off = no link, on = 1 Gbps Link, blinking =

activity)

Right LED1:(Green)

10/100Mbps LNK/ACT (off = no link, on = 10/100 Mbps

Link, blinking = activity)

15. Contact Information

Website: https://www.trendmicro.com

List of worldwide offices and phone numbers:

https://www.trendmicro.com/us/about-us/contact/index.html

Technical Support page

https://success.trendmicro.com/.

EULA

https://www.trendmicro.com/en_us/about/legal.html

registered trademarks of Trend Micro Incorporated. All other company and/or product names may be

trademarks or registered trademarks of their owners. Information contained in this document is subject to

change without notice.

Appendix : Connecting to the Console Port

The EdgeIPS console port is a USB Type–C Port located on the front panel of the

case. It is designed for connection to serial console terminals for viewing

messages during the boot sequence or for debugging system boot issues. To

connect the console cable, remove the protective cover on the port.

Serial Console Port, Cable & Pinouts

The initial configuration for the EdgeIPS using the command line interface (CLI) on a

serial terminal client will use the following default settings:

• Baud Rate: 115200 bps

• Character size: 8 bits

• Parity: None

• Stop Bits: 1

• Flow Control: None

Inhaltsverzeichnis

Andere Trend Micro Firewall Handbücher

Trend Micro

Trend Micro Gatelock X200 Bedienungsanleitung

Trend Micro

Trend Micro GateLock Bedienungsanleitung

Trend Micro

Trend Micro viruswall enforcer 1500i Bedienungsanleitung

Trend Micro

Trend Micro viruswall enforcer 1500i Bedienungsanleitung

Trend Micro

Trend Micro Deep Edge Bedienungsanleitung

Trend Micro

Trend Micro VirusWall 2500 Service-Handbuch

Trend Micro

Trend Micro viruswall enforcer 1500i Service-Handbuch

Trend Micro

Trend Micro Network VirusWall Enforcer 1200 Bedienungsanleitung

Trend Micro

Trend Micro Network VirusWall Enforcer 1200 Bedienungs- und Wartungsanleitung

Trend Micro

Trend Micro TippingPoint TPS 8200TX Bedienungsanleitung

Trend Micro

Trend Micro viruswall enforcer 1500i Bedienungsanleitung

Trend Micro

Trend Micro TippingPoint NX-Platform Benutzerhandbuch

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

Trend Micro txOne Networks EdgeIPS Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken