TREND IQX12 Bedienungsanleitung

IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020 1

Installation Instructions

IQX12

Controller

Important: Retain these instructions

These instructions shall be used by trained service

personnel only. If the equipment is used in a manner not

specied by these instructions, the protection provided by the

equipment may be impaired. https://partners.trendcontrols.com

GB DE DK FIES FR

IT NL NO RU

PL SE

32348448-001 REVA

1Dimensions

44.5 mm

(1.75”)

130 mm (5.12”)

3 INSTALLATION

1 BOX CONTENTS 2 STORING

It is recommended that the installation should comply

with the local electrical safety installation practices (e.g.

HSE Memorandum of Guidance on Electricity at Work

Regulations 1989, USA National Electric Code).

CONTENTS

1 Box Contents.................................................................1

2 Storing ...........................................................................1

3 Installation .....................................................................1

4 Field Maintenance.........................................................8

5 Disposal.........................................................................8

6 China Hazardous Substance Table ..............................8

Labels used on IQX12

Caution, consult

documentation

Sylk bus

connector

24 Vac input

power connector

󰀨

pressure sensor

24 Vac AUX

output connector

20 Vdc AUX

output connector

Supply inputs for

digital outputs

Digital output

connector (DO)

Universal input

connector (UI)

0 10V

Analogue output

override level

Universal input/

output connector

(UI/AO)

󰀨

switch

Address switch

(future use only)

Any connected devices must be insulated from mains by

reinforced insulation.

IQ X12

Installation Instructions

(TG201446)

I/O Bus Connector

+65°C

(+150°F)

-20°C

(-4°F)

95%RH

Note: For temperatures below 0°C (32°F) special care must be

taken that there is no condensation on or within the unit.

Power

indicator

Status

indicator

Service

button

Output status

indicators

135 mm (5.32”)

138 mm (5.43”)

48.5 mm (1.91”)

60.4 mm (2.38”)

WARNING Removal of cover exposes dangerous

voltages.

WARNING 

󰀨

2 IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020.

IQX12 Installation Instructions

2Mounting Requirements

3Mount Unit

3 INSTALLATION (continued)

Note: If using the Dierential Pressure Sensor (IQX12P only)

a reduced ambient temperature range applies (see step 9).

+55°C

(+131°F)

-20°C

(-4°F)

95%RH

Caution: Do not mount in areas where acid fumes or other

deteriorating vapours can attack the metal parts of the

controller, or in areas where escaping gas or other explosive

vapours are present.

Note: For temperatures below 0°C (32°F) special care must

be taken that there is no condensation on or within the unit.

IP20

Either: Clip on to TS35 DIN Rail Or:

“click”

Fit end stop if

mounted on

vertical rail

4 x M4 (No.8)

117 mm (4.69”)

120 mm (4.72”)

IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020 3

Installation Instructions IQX12

4Connect Power

5Connect Sylk™ Devices (if required)

3 INSTALLATION (continued)

Important: Where multiple devices are powered from

a single transformer, the same side of the transformer

secondary must be connected to the same power input

terminal in each device.

Supply voltage: 24 Vac (20 to 30 Vac) 50/60 Hz

Supply power: 50VA (controller only)

100VA (controller and loads).

100 VA

maximum

50 VA to controller

XX12+≤50 VA

Digital Output Supply

(see step 8)

I/O Module Supply

(see step 10)

The supply must include a suitably rated switch in close

proximity and be clearly marked as the disconnecting

device for the unit. Do not position the equipment so that the

󰀩

Terminal size: 2.0 to 1.0 mm2(14 to 18 AWG).

Terminal screw torque: 0.4 to 0.5 Nm (3.5 to 4.4 lbf-in).

Recommended cable: 2.0 mm2(14 AWG).

Power supply cable must have maximum operating

temperature of 80°C or greater. For UL rating the input power

connections must be made using 18 AWG or larger wire rated

at least 90ºC (194ºF).

DO NOT SWITCH ON POWER

Terminal size: 2.0 to 1.0 mm2(14 to 18 AWG).

Terminal screw torque: 0.4 to 0.5 Nm (3.5 to 4.4 lbf-in).

Cable type: Unscreened twisted pair.

Maximum cable length: 60 m (200 ft) in total, used to connect

all Sylk bus devices.

Number of Devices: Up to 7 (subject to power loading -

refer to device documentation).

to additional

Sylk devices

OVERRIDEFAN

polarity

independent

IQ X12 IQ X12

Sylk Device

e.g.

TR40, TR42.

For UL rating the

transformer must

be class 2 rated.

*If the power supply

is not current-limited,

an external 4A fuse

or circuit breaker



This equipment

must be earthed

(grounded)

Line

Voltage

GND

100 VA max.

24 Vac

4 IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020.

IQX12 Installation Instructions

6Connect Ethernet

3 INSTALLATION (continued)



(TE201448)

Standard Ethernet cable

(Cat 5e twisted pair)

maximum 100 m (109 yds)

IQX12 Controller Network Examples

Daisy Chain Topology RSTP Ring Topology (maximum 40 controllers)

Tree / Star Topology

IQX12IQX12

IQX12

IQX12IQX12

IQX12

Important: DO NOT ‘close’ the ring until RSTP has been

congured on ALL devices in the ring.

IQX12

Ethernet LAN or WAN

Ethernet-enabled

Device

Network Switch IQX12 Controller

RJ45

Supervisor/

Web Browser

Supervisor/

Web Browser

Supervisor/

Web Browser

IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020 5

Installation Instructions IQX12

7Connect Universal Inputs / Outputs (if required)

3 INSTALLATION (continued)

Terminal size: 2.0 to 1.0 mm2(14 to 18 AWG).

Terminal screw torque: 0.4 to 0.5 Nm (3.5 to 4.4 lbf-in).

Caution: Do not connect ‘C’ (0V) terminals to earth (ground).

Thermistor / Resistive input

Current input

Voltage input Volt-free / Digital input

ensure correct

polarity

0 to 10 Vdc

Externally powered

External

Power

Supply

ensure correct

polarity

Loop powered (using 20 Vdc AUX output supply, 100mA maximum)

ensure correct

polarity

Common C terminal is linked

internally to AUX supply common -

no additional connection is required

volt free

contact

open

collector

ensure correct

polarity

logic

circuit



TTL /

CMOS

0V IN

IN 0V

0V IN

Input Connection Examples

Output Connection Example

3 x Universal

Input (UI)

3 x Universal

Input/Output (UIO)



0 to

300kW

e.g.

20kNTC

PT1000

Output Type Load

0 to 10 Vdc, 10 mA max. W

4 to 20 mA W

6 IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020.

IQX12 Installation Instructions

8Connect Digital Outputs (if required)

9Connect Di󰀨erential Pressure Sensor (IQX12P only, if required)

3 INSTALLATION (continued)

Terminal size: 2.0 to 1.0 mm2(14 to 18 AWG).

Terminal screw torque: 0.4 to 0.5 Nm (3.5 to 4.4 lbf-in).

Output Type Solid-State Relay

Current per Channel 1.5A* continuous;

3.5A inrush for 100 ms.

* subject to 100VA limit via terminal B.

Voltage Range: As supply source (see below).

A1A3B5

A2A4B6

+++

–––

Or: from an additional external source(s)

Either: from AUX output

50°C

(122°F)

0°C

(32°F)

±500 Pa

(± 2” WC)

Caution:

Do not connect

‘0V’ terminals to

earth (ground).

Connect Output Devices

Connect Output Power Supply

Output Signal Options:

󰀨

PWM (pulse width modulation)

Air, N, O

non-condensing

ø5.2mm

ø3.5mm

8mm

50 VA

maximum

(see step 4)

terminal A =

72 VA max.

terminal B =

100 VA max.

Power

Supply

24 Vac (20 - 30Vac)

GND

IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020 7

Installation Instructions IQX12

10 Install and Connect I/O Expansion Modules (if required)

11 Congure the IQX12 Controller, I/O Modules & Sylk Bus Devices

3 INSTALLATION (continued)



(TE201448)

IQXIO Installation Instructions

(TG201447)

8 IQX12 Controller Installation Instructions TG201446 Issue 1, 26-Mar-2020.

IQX12 Installation Instructions

TR CU 

Please send any comments about this or any other Trend technical

publication to [email protected]

Building Division of Honeywell Products and Solutions SARL, Z.A. La Pièce, 16, 1180 Rolle, Switzerland by its Authorized Representative, Trend Control

Systems Limited.

Trend Control Systems Limited reserves the right to revise this publication from time to time and make changes to the content hereof without obligation

to notify any person of such revisions or changes.

Trend Control Systems Limited

St. Mark’s Court, North Street, Horsham, West Sussex, RH12 1BW, UK. Tel: +44 (0)1403 211888, www.trendcontrols.com

4 FIELD MAINTENANCE

The IQX12 requires no routine maintenance.

6 CHINA HAZARDOUS SUBSTANCE TABLE

部件名称

Component Name

有害物质

Hazardous Substances

铅(Pb)

Lead (Pb)

汞(Hg)

Mercury (Hg)

镉 (Cd)

Cadmium (Cd)

六价铬 (Cr6+)

Chromium VI

Compounds

(Cr6+)

多溴联苯 (PBB)

Polybrominated

Biphenyls (PBB)

多溴二苯醚

(PBDE)

Polybrominated

Diphenyl Ethers

(PBDE)

接线端子

Terminal Block

X O O O O O

导轨

Bus Bar

X O O O O O

螺丝

Screws

X O O O O O

印刷线路板

PCB

X O O O O O

本表格依据

SJ/T 11364

的规定编制。

This table is prepared in accordance with the provisions of SJ/T 11364.

表示该有害物质在该部件所有均质材料中的含量均在

GB/T 26572

规定的限量要求以下。

Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement

of GB/T 26572.

表示该有害物质至少在该部件的某一均质材料中的含量超出

GB/T 26572

规定的限量要求。

Indicates that said hazardous substance contained in all of the homogeneous materials for this part is above the limit requirement

of GB/T 26572.

未列入表内的其他部件，皆不含任何超出限量要求的限制使用物质。

All other components, not listed in the table, do not contain restricted substances above the threshold level

5 DISPOSAL

WARNING: Contains no serviceable parts. Do

not attempt to open the unit. Failure to comply may

cause damage to the unit.

WEEE Directive:

At the end of their useful life the packaging and

product should be disposed of by a suitable

recycling centre.

Do not dispose of with normal household waste.

Do not burn.

Andere TREND Controller Handbücher

TREND

TREND IQ3 series Bedienungsanleitung

TREND

TREND CNC2 Bedienungsanleitung

TREND

TREND IQ23 Series Bedienungsanleitung

TREND

TREND LonMark IQL13+ Series Bedienungsanleitung

TREND

TREND ADS10 Series Bedienungsanleitung

TREND

TREND CNC2 Bedienungsanleitung

TREND

TREND AD05-24 Bedienungsanleitung

TREND

TREND INC2 Bedienungsanleitung

TREND

TREND AL0620-24-K Bedienungsanleitung

TREND

TREND IQ41 Series Bedienungsanleitung

TREND

TREND IQ41 Series Bedienungsanleitung

TREND

TREND IQ422 Bedienungsanleitung

TREND

TREND IQECO31/230 Bedienungsanleitung

TREND

TREND IQ3xcite Bedienungsanleitung

TREND

TREND IQ251 Bedienungsanleitung

TREND

TREND IQ422 Bedienungsanleitung

TREND

TREND IQ4E Bedienungsanleitung

TREND

TREND NBOX(B)/CNC2 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch