TRENDnet TEG-PCITXR Bedienungsanleitung

Quick Installation Guide

TEG-PCITXR

TEG-PCITXRL

3.14

Table of Contents

Version .05.201105

English 1

1. Before You Start

2. How to Install 2

Troubleshooting 4

1. Before You Start

ŸCD-ROM Drive

ŸNetwork Cable

32-bit PCI 2.1 slot

Package Contents

ŸCD-ROM (Drivers)

ŸMulti-Language Quick Installation Guide

TEG-PCITXR/TEG-PCITXRL

System Requirements

CPU Memory

Windows Vista (32/64-bit)

Windows 7 (32/64-bit)

Windows XP (32/64-bit) /

2003 Server / 2000 / ME / 98SE

800MHz or above

1GHz or above

300MHz or above

512MB RAM or above

1GB RAM or above

256MB RAM or above

Supported Operating Systems

2. How to Install

1. Insert the Driver CD-ROM into your computer's

CD-ROM Drive.

4. Follow the InstallShield Wizard instructions.

Note:

1. For Windows 7, please skip to step 7. For Windows Vista/XP/2000, continue on to

step 1.

2. Do not insert the TEG-PCITXR/TEG-PCITXRL until instructed to do so.

2. Click Run autorun.exe (Windows Vista only)

3. Click Install Driver.

5. Click Yes (Windows 2000 only).

6. Click Finish.

7. Shutdown your computer and then open your

computer’s Case.

10. Click Yes (Windows 2000 only)

Your installation is now complete.

11. Connect one end of a network cable to one of

the network ports on your modem, router or

switch. Connect the other end of the cable to

the TEG-PCITXR/TEG-PCITXRL’s network

port.

8. Insert PCI Card firmly into an available PCI slot,

and then turn ON the computer and wait until

the Windows desktop appears.

9. Drivers will install automatically.

1. I inserted the Driver CD-ROM into my computer's CD-ROM drive and the installation menu

does not appear automatically. What should I do?

1. For Windows 7, if the installation menu does not appear automatically, click on the

Windows Icon on the bottom left hand corner of the screen, click the “Search programs

and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter

assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.

2. For Windows Vista, if the installation menu does not appear automatically, click Start,

click the Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the

letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.

3. For Windows 2000/XP, if the installation menu does not appear automatically, click Start,

click Run, and type D:\autorun where "D" in "D:\autorun.exe" is the letter assigned to

your CD-ROM Drive, and then press the ENTER key on your keyboard.

2. Windows doesn’t recognize my new hardware. What should I do?

1. Verify that your computer meets the system requirements as specified in Section 1.

2. Access your device manager to make sure the adapter is installed properly.

1. To access the device manager on Windows 7, click on the Windows icon on the

bottom left-hand corner, click Computer, click System Properties and then click

Device Manager.

2. To access the device manager on Windows Vista, right-click Computer, click

Properties and then click Device Manager.

3. To access the device manager on Windows XP, right-click My Computer, click

Properties, click the Hardware tab, and then click Device Manager.

If you see a networking device with a yellow question mark or exclamation point:

1. Uninstall the device from device manager

2. Shutdown the computer.

3. Remove the adapter from the computer

4. Reinstall the adapter. See Section 2. How to Install.

3. If the device manager fails to recognize the presence of a new networking adapter, verify

that the network adapter is firmly seated in the PCI slot.

4. Plug the adapter into another PCI slot on your computer.

3. Windows recognizes my new hardware, but I’m unable to connect to my network. What

should I do?

Verify that the RJ-45 Ethernet Cable is securely connected from your switch or router to

your network adapter.

2. Verify that the LEDs on your network card are lit.

3. Verify that the TCP/IP settings are set to Obtain an IP address automatically (see the

steps below).

Troubleshooting

Windows Vista

2. Click Internet Protocol Version 4(TCP/IPv4)

and then click Properties. Then click on Obtain

an IP address automatically.

Windows 7

1. Go into the Control Panel, click Network and

Internet, click Network and Sharing Center,

click Change Adapter Settings and then

right-click the Local Area Connection icon and

then click Properties.

1. Go into the Control Panel, click Network and

Internet, click Network and Sharing Center,

click Manage Network Connections and then

right-click the Local Area Connection icon

and then click Properties.

2. Click Internet Protocol Version 4(TCP/IPv4)

and then click Properties. Then click on Obtain

an IP address automatically.

Troubleshooting

Windows XP/2000

1. Go into the Control Panel, double-click the

Network Connections icon and then right-click

the Local Area Connection icon and then click

Properties.

2. Click Internet Protocol (TCP/IP) and then

click Properties. Then click on Obtain an IP

address automatically.

4. How do I install the drivers on Windows 98 or ME?

Please refer to the Help folder on the Driver CD-ROM.

5. Why am I only getting a network connection speed of 100Mbps instead of 1000Mbps?

1. Check the Ethernet Cable. Make sure you are using CAT-5e or CAT-6 Ethernet Cables.

Some CAT-5 cables are not rated to run in Gigabit.

2. Make sure you are connected to a 1000Mbps switch.

If you still encounter problems or have any questions regarding the TEG-PCITXR/TEG-PCITXRL,

please refer to the User's Guide included on the Driver CD-ROM or contact Trendnet's Technical

Support Department.

Andere Handbücher für TEG-PCITXR

Dieses Handbuch passt für folgende Modelle

Andere TRENDnet Computerhardware Handbücher

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Bedienungsanleitung

TRENDnet

TRENDnet TEW-641PC Bedienungsanleitung

TRENDnet

TRENDnet TEW-441PC - 108Mbps Wireless PC Card... Bedienungsanleitung

TRENDnet

TRENDnet TEW-227PC Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCBUSR Bedienungsanleitung

TRENDnet

TRENDnet TEW-601PC - SUPER G MIMO WRLS PC CARD Bedienungsanleitung

TRENDnet

TRENDnet TE100-PCBUSR - DATA SHEETS Bedienungsanleitung

TRENDnet

TRENDnet TU3-H2EC Bedienungsanleitung

TRENDnet

TRENDnet TU2-H2PC Bedienungsanleitung

TRENDnet

TRENDnet TU3-H2EC Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCBUSR Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCBUSR Bedienungsanleitung

TRENDnet

TRENDnet TU2-PCBUS Bedienungsanleitung

TRENDnet

TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Bedienungsanleitung

TRENDnet

TRENDnet TEW-421PC Bedienungsanleitung

TRENDnet

TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCBUSR Bedienungsanleitung

TRENDnet

TRENDnet TEG-SK1 Bedienungsanleitung

TRENDnet

TRENDnet TE100-PC16R Bedienungsanleitung

TRENDnet

TRENDnet TEW-301PC Bedienungsanleitung

TRENDnet

TRENDnet TEW-421PC Bedienungsanleitung

TRENDnet

TRENDnet TEW-401PC Bedienungsanleitung

TRENDnet

TRENDnet TIM-128 Bedienungsanleitung

TRENDnet

TRENDnet TIM-128 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung