TRENDnet TEW-P21G Bedienungsanleitung
TEW-P21G
Quick Installation Guide
Table of Contents
Table of Contents
Version 12.13.05
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
2
3
7
1. Before You Start
2. How to Connect .................................................................................
3. Using the Print Server ........................................................................
.................................................................................
1. Before You Start
English
1
TEW-P21G
Quick Installation Guide
Driver CD-ROM
Power Adapter (5V, 2.5A)
Package Content
System Requirements
54Mbps 802.11g Wireless
Multi-Port Print Server
(TEW-P21G)
USB 2.0 Printers
Parallel Printer
Cable/DSL 802.11g
54Mbps Wireless Router
(TEW-431BRP)
Notebook with
Wireless PC Card
(TEW-421PC)
Workstation with
Wireless PCI Adapter
(TEW-423PI)
54Mbps Wireless
Cable/DSL Modem
Internet
1. Pentium 100Mhz or faster processor
2. 8MB RAM or more
3. Windows, Linux, Mac OS X or other OS
2. Connect a Parallel or USB printer to the printer
ports.
1. Connect the antenna.
4. Plug the AC power adapter into the Print
Server.
2. How to Connect
English
2
Note: Please power off all printers before connecting them to the print server.
Then turn on each printer after you make your hardware connections.
3. Connect the RJ45 cable to the LAN port and
to your network hub or switch.
English
3
1. After inserting the installation CD,
click Install Utility.
2. Go through each installation step
and click Finish.
3. Using the Print Server
Note: For MAC Users, change your computer’s IP address to 192.168.0.X
(where X is an available number from 2-254), and enter 192.168.0.1 in your
web browser to access the Print Server's Web Utility.
For Windows Users
3. Double-click the PS-Utility icon.
PS-Utility
V3.00
5. Select Manually Assign and type
in an IP Address that matches
your current network segment.
Click OK. Another pop-up window
will appear to confirm the change.
Click OK.
4. Click Change IP Address.
English
4
6. Click Show Web Setup on PS-
Utility. Take note and write down
the Server Name and the Printer
Name.
English
5
Note: If you are using Windows 95/98(SE)/ME, then make sure that NETBEUI
is installed before you follow the instructions below. If you are using Windows
2000/XP, then you can simply add your printer using the instructions below. For
TCP/IP Printing instructions, please consult the User's Guide on the CD-ROM
for details.
7. Go into Control Panel and double-
click Printers and Faxes. Click
Add Printer.
8. Click Next on the Add Printer
Wizard, and select the network
printer option. Click Next.
12. Select Yes and click Next. Click
Finish to complete the
installation.
11. Select the appropriate driver for
your printer and click Next.
10. Click OK.
English
6
Note: For more detail on advanced features, please consult the User's Guide.
Your installation is now complete.
9. Select Connect to this printer
and type in the server name and
the printer name in the following
format:
\\server_name\printer_name
Click Next.
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
Q5.
A5.
Q6.
A6.
I cannot add a network printer after I typed the server name and printer name.
Please double check your hardware connections. Make sure that your printer
is connected properly to the print server and your power adapter is connected
properly to a power outlet.
I have double checked my hardware connections and have verified that
everything is connected properly, but I still cannot connect to my printer after I
typed in the server name and printer name.
Make sure that you are typing the correct printer name. If your USB printer is
connected to the USB2 slot, then use the Printer Name that is by the USB2
heading in the web configuration utility.
I verified that the hardware installation is correct and typed the correct printer
name, but I still cannot find the network printer.
Make sure that the server name and printer name is entered correctly. There
should be no spaces, and the back slashes that separate the server name
and printer name should be this “\\”, instead of this ”//”.
I typed in the server name and printer name correctly and successfully
installed the network printer. But I can't print a test page.
Make sure that the printer is online by turning the printer on. Make sure the
power adapter of your printer is properly connected to a power outlet.
I successfully added a network printer to my computer, and my printer is
receiving power. I can also print a test page, but I cannot print anything from
Microsoft Word or other applications.
Make sure to set the newly installed network printer to your default printer.
I configured my print server to automatically receive an IP Address from a
DHCP server, and now I cannot go into the print server's web utility.
Open PS-Utility to locate your Print Server's IP address. For MAC users,
press the Reset button at the back of the TEW-P21G, hold the button for 15
seconds, release the button, and enter http://192.168.0.1 in a web browser to
access the web utility feature.
7
Troubleshooting
Q7.
A7.
Q8.
A8.
I pressed the reset button and held it for 15 seconds. I also typed in
http://192.168.0.1 in a web browser, but I still cannot access my print server.
Make sure to change your IP Address to 192.168.0.xxx where xxx is an
available number between 2 to 254.
I configured my Wireless Print Server to have the same SSID as my Access
Point, but I still cannot print from my Wireless Print Server.
Your Access Point or Wireless Router may have enabled its wireless security.
You can either disable wireless security or configure the Print Server's
wireless security feature. Make sure that the encryption method and
password for your Wireless Printer is the SAME as your Access Point or
Wireless Router. Also make sure that the format (HEX or ASCII) and the bit
encryption (64-bit, 128bit, etc.) is the same.
If you have any questions regarding the TEW-P21G, please contact TRENDnet
Technical Support Department.
8
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
Waste electrical and electronic products
must not be disposed of with household
waste. Please recycle where facilities
exist. Check with you Local Authority or
Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Andere Handbücher für TEW-P21G
3
Inhaltsverzeichnis
Andere TRENDnet Druckserver Handbücher
TRENDnet
TRENDnet TE100-PS1U Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1UG - Wireless Print Server Bedienungsanleitung
TRENDnet
TRENDnet TE-310 Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1UG - Wireless Print Server Bedienungsanleitung
TRENDnet
TRENDnet TE100-P1U Bedienungsanleitung
TRENDnet
TRENDnet TE100-P1P - Parallel Print Server Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1PG SHEETS Installationsanleitung
TRENDnet
TRENDnet TE100-P21 Bedienungsanleitung
TRENDnet
TRENDnet TE100-P1U Bedienungsanleitung
TRENDnet
TRENDnet TW100-P1W1 Bedienungsanleitung
TRENDnet
TRENDnet TE100-PS3 Bedienungsanleitung
TRENDnet
TRENDnet TE100-MP2U Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1U1P Bedienungsanleitung
TRENDnet
TRENDnet TE100-MFP1 Bedienungsanleitung
TRENDnet
TRENDnet TE100-P1U Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1PG SHEETS Bedienungsanleitung
TRENDnet
TRENDnet TW100-P1W1 Bedienungsanleitung
TRENDnet
TRENDnet TEW-MP2U - Wireless Multi-Function Print... Bedienungsanleitung
TRENDnet
TRENDnet TEW-P1PG - Wireless Parallel Print Server Bedienungsanleitung
TRENDnet
TRENDnet TE100-P1P - Parallel Print Server Bedienungsanleitung
