TRENDnet TEG-S80TX Bedienungsanleitung
TEG-S80TX
8-Port 10/100/1000Mbps
Copper Gigabit Ethernet Switch
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user’s guide,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take adequate measures.
VCCI Warning
P/N:6012-8000T01
Rev.A1-01
TABLE OF CONTENTS
ABOUT THIS GUIDE...........................................................................1
TERMS................................................................................................1
OVERVIEW OF THIS USER’S GUIDE........................................................1
INTRODUCTION.................................................................................3
GIGABIT ETHERNET TECHNOLOGY......................................................3
SWITCHING TECHNOLOGY ..................................................................4
FEATURES...........................................................................................5
UNPACKING AND SETUP..................................................................7
UNPACKING........................................................................................7
SETUP .................................................................................................7
DESKTOP OR SHELF INSTALLATION .....................................................8
RACK INSTALLATION ..........................................................................9
IDENTIFYING EXTERNAL COMPONENTS .....................................11
FRONT PANEL...................................................................................11
REAR PANEL.....................................................................................12
LED INDICATORS..............................................................................12
TECHNICAL SPECIFICATIONS......................................................15
1
ABOUT THIS GUIDE
This user’s guide tells you how to install your 8-Port
10/100/1000Mbps Gigabit Ethernet Switch and how to connect
it to your Ethernet network.
Terms
For simplicity, this documentation uses the terms “Switch” (first
letter upper case) to refer to the 8-Port 10/100/1000Mbps Gigabit
Ethernet Switch, and “switch” (first letter lower case) to refer to
all Ethernet switches, including the 8-Port 10/100/1000Mbps
Gigabit Ethernet Switch.
Overview of this User’s Guide
? ?Introduction. Describes the Switch and its features.
? ?Unpacking and Setup. Helps you get started with the basic
installation.
? ?Identifying External Components. Describes the front
panel, rear panel, and LED indicators.
? ?Technical Specifications. Lists the technical specifications.
3
INTRODUCTION
This section describes the features of the 8-Port
10/100/1000Mbps Gigabit Ethernet Switch, as well as giving
some background information about Gigabit Ethernet and
switching technology.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3 Ethernet, utilizing
the same packet structure, format, and support for CSMA/CD
protocol, full duplex, flow control, and management objects, but
with a tenfold increasein theoretical throughput over 100-Mbps
Fast Ethernet and a hundredfold increase over 10-Mbps
Ethernet. Since it is compatible with 10-Mbps and 100-Mbps
Ethernet environments, Gigabit Ethernet provides a
straightforward upgrade without wasting a company’s existing
investment in hardware, software, and trained personnel.
The increased speed and extra bandwidth offered by Gigabit
Ethernet is essential when coping with the network bottlenecks
that frequently develop as computers and their busses get
faster and more users use applications that generate more
traffic. Upgrading key components, such as your backbone and
servers to Gigabit Ethernet can greatly improve network
response times as well as significantly speed up the traffic
between your subnets.
4
Since the Gigabit Ethernet data transfer rate is 10 times faster
than Fast Ethernet, servers equipped with Gigabit Ethernet
NIC’s are able to perform 10 times the number of operations in
the same amount of time. This makes Gigabit Ethernet the
perfect solution for video conferencing, complex imaging, and
similar data-intensive applications.
Switching Technology
Another key development pushing the limits of Ethernet
technology is in the field of switching technology. A switch
bridges Ethernet packets at the MAC address level of the
Ethernet protocol, transmitting among connected Ethernet or
Fast Ethernet LAN segments.
Switching is a cost-effective way of increasing the total network
capacity available to users on a local area network. A switch
increases capacity and decreases network loading by dividing
network into different segments and each segment has its own
bandwidth (10, 100, or 1000Mbps).
The switch acts as a high-speed selective bridge between the
individual segments. Traffic that needs to go from one segment
to another is automatically forwarded by the switch (without
interfering with any other segments). This allows the total
network capacity to be multiplied, while maintaining the same
network cabling and adapter cards.
Andere Handbücher für TEG-S80TX
1
Inhaltsverzeichnis
Andere TRENDnet Schalten Handbücher
TRENDnet
TRENDnet TE100-S86FX Bedienungsanleitung
TRENDnet
TRENDnet TPE-80WS - Web Smart PoE Switch Bedienungsanleitung
TRENDnet
TRENDnet TEG-7080ES Bedienungsanleitung
TRENDnet
TRENDnet TEG-S24R - DATA SHEETS Bedienungsanleitung
TRENDnet
TRENDnet GREENnet TEG-S24g Bedienungsanleitung
TRENDnet
TRENDnet TE100-DX8E Bedienungsanleitung
TRENDnet
TRENDnet TU3-H4E Bedienungsanleitung
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Bedienungsanleitung
TRENDnet
TRENDnet TFU-430 Bedienungsanleitung
TRENDnet
TRENDnet TEG-S50G Bedienungsanleitung
TRENDnet
TRENDnet TK-802R Bedienungsanleitung
TRENDnet
TRENDnet TE-1710 Bedienungsanleitung
TRENDnet
TRENDnet TE100-DX8 - Bedienungsanleitung
TRENDnet
TRENDnet TEG-S224TXA - 26PORT Gigabit Copper Switch 24-10/100... Bedienungsanleitung
TRENDnet
TRENDnet TE100-SK4 Bedienungsanleitung
TRENDnet
TRENDnet TU2-400 Bedienungsanleitung
TRENDnet
TRENDnet TU2-NU4 Bedienungsanleitung
TRENDnet
TRENDnet TPE-80WS - Web Smart PoE Switch Bedienungsanleitung
TRENDnet
TRENDnet TPE-S80 Bedienungsanleitung
TRENDnet
TRENDnet TK-204UK - DVI USB KVM Switch Bedienungsanleitung
