Triax IPTV EPG Server Bedienungsanleitung
User Manual
IPTV EPG Server
Article
Article no.
IPTV EPG Server
492095
Version
V1.1
Date
2021/11
EN
IPTV EPG-Server
EN 2
Table of content
1Safety regulations and notes .......................................................................................................... 3
2Revision history ............................................................................................................................. 5
3IPTV EPG Server ............................................................................................................................. 5
3.1 Introduction.....................................................................................................................................................5
3.2 Packing contents..............................................................................................................................................5
3.3 Technical data..................................................................................................................................................6
4Mounting the IPTV EPG Server ....................................................................................................... 7
4.1 Installing the device.........................................................................................................................................7
4.2 Device overview...............................................................................................................................................7
5Installation & Easy Setup................................................................................................................ 8
5.1 Installation .......................................................................................................................................................8
5.1.1 Static IP address 8
5.1.2 Connecting to the EPG Server 8
5.2 TDX Setup.........................................................................................................................................................8
5.3 STATUS.............................................................................................................................................................9
5.4 SETTINGS........................................................................................................................................................10
5.4.1 Device Settings 10
5.4.2 Server Settings 10
5.4.3 How to change from SINC to REACH XML format 11
5.5 SECURITY........................................................................................................................................................12
5.6 SOFTWARE UPGRADE ....................................................................................................................................12
5.6.1 How to do an initial install (normal update not working) 13
5.7 MISC...............................................................................................................................................................14
5.7.1 Importing and exporting settings 14
5.8 Output format................................................................................................................................................14
5.8.1 XMLTVFormat 15
5.9 Information necessary for the Middleware Server .......................................................................................15
5.9.1 Samsung SINC Server and REACH Server 16
5.10 Troubleshooting.............................................................................................................................................16
6Support........................................................................................................................................ 17
7Terms and Abbreviations ............................................................................................................. 18
IPTV EPG-Server
3 EN
1Safety regulations and notes
ATTENTION
•Failure to comply with the specified precautionary measures may cause serious injury to persons or damage
to property.
•The assembly, installation, additional electrical wiring, servicing installation and commissioning may only be
performed by suitably qualified persons, technicians or installers in compliance with safety regulations.
•Damage due to improper installation and commissioning, defective connectors on cables or any other
incorrect handling will void the warranty.
CAUTION
•The devices meet the EU directives 2011/65/EU, 2014/30/EU and 2014/35/EU.
•The safety requirements are according to the standards EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 and
must be observed, especially concerning equipotential bonding and earthing.
•Observe the relevant country-specific standards, regulations and guidelines on the installation and operation
of antenna systems.
•Before starting installation or service work disconnect the receiving system from mains.
•Installation or service work should NEVER be undertaken during electrical / thunderstorms.
•Avoid short circuits!
•To ensure electromagnetic compatibility, make sure all connections are tight and that the covers are screwed
on securely.
•Take action to prevent static discharge when working on the device!
•Due to the risk of fires caused by lightning strikes, we recommend that all mechanical parts (e.g. distributor,
equipotential bonding rail, etc.) be mounted on a non-combustible base. Wood panelling, wooden beams,
plastic covered panels and plastic panels are all examples of combustible bases.
Back up battery:
The unit includes a preinstalled Lithium battery (CR2032) as backup power source for the clock.
Type: Varta 6032101501, Battery, Coin Cell, Single Cell, 3 V, 2032, 230 mAh
Do not attempt to replace the non-rechargeable coin-cell battery. Replacement of the battery must only be done
by a special trained technician.
There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery contains
lithium and can explode if it is not properly handled, or disposed of. Replace only with a battery of the same
type. To avoid possible injury or death, do not: (1) Throw or immerse into water, (2) allow it to heat more than
100°C (212°F) or (3) attempt to repair of disassemble it. Dispose of it as required by local ordinance or
regulations and your company’s safety standards.
To prevent fire, short circuit or shock hazard
•Do not expose the unit to rain or moisture.
IPTV EPG-Server
EN 4
•Install the unit in a dry location without infiltration or condensation of water. In case of the formation of
condensation wait until the system is completely dried.
•Do not expose it to dripping or splashing.
•If any liquid should accidentally fall into the cabinet, disconnect the power plug.
•Install the head-end station where it is protected from direct exposure to sunlight
•Install the head-end station not within the immediate vicinity of heat sources
•Do not install the head end in cabinets or recesses which are not ventilated.
•Do not place any vessels containing liquids on the head-end station.
•Do not place anything on the head-end station which could initiate fires.
To avoid any risk of overheating
•Install the unit in a well aired location and keep a minimum distance around the apparatus for sufficient
ventilation
•Do not place anything on the unit that might cover the ventilation holes.
•Do not install the product in a dusty place
•Use the apparatus only in moderate climates (not in tropical climates)
•Respect the minimum and maximum temperature specifications
•Ensure that the headend station is adequately ventilated.
To avoid any risk of electrical shocks
•Controller must be correctly grounded according to applicable national regulations.
•For a complete disconnection from the mains, the mains plug must be pulled out of the mains socket. Ensure
that the mains plug can be pulled out without difficulties.
•Pull out power plug when making connections of cables.
•To avoid electrical shock, do not open the housing.
To avoid interferences with LTE services in Europe
•Do not select a channel higher than UHF 48 in countries with LTE II / 700 operation
•Do not select a channel higher than UHF 60 in countries with LTE I / 800 operation
•Use coaxial cables with screening effectiveness of >85dB (Class A) at least or >95dB (Class A+)
WEEE disposal
Electronic devices should never be disposed of in the household rubbish. In accordance with directive
2002/96/EC of the European Parliament and the European Council from January 27, 2003 which
addresses old electronic and electrical devices, such devices must be disposed of at a designated
collection facility. At the end of its service life, please take your device to one of these public collection
facilities for proper disposal.
IPTV EPG-Server
5 EN
2Revision history
Version 1.0 IPTV EPG Server user manual - First release
Version 1.1 Update for Samsung REACH support
3IPTV EPG Server
3.1 Introduction
The IPTV EPG Server provides Middleware Solutions for Hotel IPTV systems with an eXtensive Markup Language
(XML) file with the EPG data, normally contained in a DVB Transport Stream Barker Channel from satellite, cable and
terrestrial antenna input to the TDX.
Figure 1: Example setup, based on Macnetix system
3.2 Packing contents
1 piece IPTV EPG-Server
1 piece Power Supply
2 pieces Wall or Rack mounting brackets
4 pieces Screws
IPTV EPG-Server
EN 6
3.3 Technical data
Type
IPTV EPG Server
Art. no
492095
Functionality
EPG XML Server for IPTV
I/O RJ45 Ethernet Connector
Supported speed
Mbps
10/100/1000
Cable Category
Cat 5e, Cat 6, Cat 7
Maximum Cable Length
m
100
Input USB AUX
Maximum power consumption
mA
500
Maximum supported disk size
TB
2
Maximum supported file size
GB
4
Maximum supported filename length
255 characters
General Data
I/O connector IP Stream
RJ45 Ethernet
Input connector USB AUX
USB female
Input connector DC
DC Jack 2mm inner diameter, 5.5mm outer diameter
Current consumption (without USB Device present)
mA
400 @5V
Input voltage (fed from TOU 232SA or optional from PSU
V
4.8…5.2
Operating temperature
°C
-10…+50
Weight
kg
1.126
Dimensions
mm
160x167x30
Accessories
Power supply
100…240VAC, +5VDC/3A,
TRIAX Part no.: 310019
IPTV EPG-Server
7 EN
4Mounting the IPTV EPG Server
4.1 Installing the device
The IPTV EPG-Server can be mounted in a 19” rack or wall mounted in any direction needed.
4.2 Device overview
IPTV EPG-Server
EN 8
5Installation & Easy Setup
5.1 Installation
5.1.1 Static IP address
A static address must be used on the computer you use to configure the headend. Refer to the computer’s operating
software documentation for assistance on using static IP addresses.
5.1.2 Connecting to the EPG Server
Connect IPTV EPG Server to power. Using a computer on the same local network, type in the Server IP (default:
http://192.168.0.200) into a browser to access the EPG Server Web Interface.
Enter user name and password (default “admin” and “Triax1234”) and press Enter.
Note:
The computer must have access to the same IP Subnet as the Server.
5.2 TDX Setup
Before getting started, make sure the headend is setup with a unique TSID and ONID and each channel has a unique
SID.
Setup the headend to deliver an IP Barker channel (a transport stream containing only information about upcoming
programs, thereby reducing the bandwidth required for the transport streams carrying the audio/video information)
in order to provide the IPTV EPG Server with a transport stream of EPG data.
Note:
For information on how to set up an IP Barker channel, please refer to the “IP Output Configurations – EIT Barker
channel” chapter of the TDX Headend System Main Unit User manual.
Take special note of the multicast IP address for the Barker channel, as this is needed for the rest of the setup
procedure.
IPTV EPG-Server
9 EN
5.3 STATUS
The Server Status page, gives basic information about the server. Take special note of the “Services” and “Events”
fields. These show how many services the server is currently receiving data for, through the Barker channel. This
number may differ from the number of services, reported by the TDX, since not all services actually have EPG data in
their transport stream. The Events show how many programs are currently registered in the EPG server
IPTV EPG-Server
EN 10
5.4 SETTINGS
5.4.1 Device Settings
The Settings link takes you to the settings menu.
The Settings menu contains the static IP settings for the IPTV EPG Server and the Server Settings for listening to the
Barker channel.
The IPTV EPG Server IP can be changed to a different subnet (e.g. the same as the TDX Service port). You can do so by
changing it under “IP Settings”. It is not a necessary for the IPTV EPG Server to be on the same subnet as the TDX
AUX port, they simply need to be connected to the same switch.
5.4.2 Server Settings
Enter the Barker channel IP you entered when setting up the TDX here.
You should now be able to access the EPG data in the selected XML format from your middleware solution.
Note:
To check the setup, you could enter the server address, followed by the path to see the raw xml file, e.g.
http://192.168.0.200/xmlTvEvents.
Special note on Samsung SINC Server: Samsung Language Priority is a setting used for the Samsung SINC server
system. Because the Samsung format is only designed for 1 language, the server will use the topmost language in this
list that is available in the Barker stream. If the server has detected a new language that has not been prioritized yet,
it will be printed in red until the changes are applied.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung