TriBrer TB-700 Bedienungsanleitung

OTDR Testing Platform

TB-700

User’s Manual

2020-10-01 THU 10:08

Mini OTDR OPM Loss Test

OLA SE

Distance Test Sequence Test

OLS System Settings

WARNING

Any undefined change or modification of this manual will deprive you of the right to operate t-

he equipment.

To reduce the risk of fire or electric shock, do not expose the equipment to rain or humidity.

To prevent electric shock, please do not open the shell, and it must be repaired by qualified p-

ersonnel.

Please ensure no signal in fiber before testing, active fiber may damage the device and not in

warranty range.

NOTE

As the laser is harmful to the eyes, don't look directly at the laser outlet and don't attempt to d-

isassemble the cabinet.

Using the battery:

The device can be recharged with a special battery, and cannot be mixed with

different types or capacity batteries.

Avoiding condensation:

Sudden changes in temperature should be avoided. Do not use the device immediately after

moving the device from the cold area to the hot area, or when the room suddenly heats up, b-

ecause the device may have condensation phenomenon. If the temperature changes abruptly ,

stop using it and take out the battery, and the power can be switched on after at least an hour.

Storage:

When the device is not used for a long time, please take out the battery to avoid

the damage caused by battery leakage.

※The manual is for reference only; All operations are subject to the physical device.

PRECAUTIONS FOR USE

CAUTION

DO NOT STARE INTO THE BEAM OR VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION

635-650nm LASER

CLASS 1 LASER PRODUCT

INVISIBL E LASER RA DIATION

AVOID EYE OR SKIN EXPOSURE

TO DIRECT OR SCATTERED RADIATION

EXCIMER LA SER

10mW MAX PULSE at 800-1700nm

DANGER

HOST

OPM

RJ-45 cable test module

VFL

LED light

3.5 inch LCD

RJ-45 test

Type-C

Power Bank

OTDR/OLS

S E T TI N G M A RK E R

+ E S C= F U L L

EN T E R SC A N

ES C

> 2s L E D

VFL

SA V E

F IL E

1 —— Press to enter the corresponding measurement setting interface.

2 —— Press to save current testing result or enter into the file list.

3 —— Select the cursor in OTDR testing interface.

4 —— Control VFL ON-GLINT-OFF, and press >2s to turn on/off LED light.

5 —— Zoom in/out the OTDR testing waveform combining with Navigation and ESC buttons

6 —— Long press to turn on/off the device. If OFF, it will pop up “Do you want to power off”

7 —— Press to start the measurement.

8 —— Press to back to previous menu.

9 —— Navigation buttons for selecting operation

10 —— Press to enter the next operation and confirm.

KEYS INTRODUCTION

1 2

5 7

106 8

3 4

2020-10-01 THU 10:08

Mini OTDR OPM Loss Test

OLA SE

Distance Test Sequence Test

OLS System Settings

EN T E R

Battery (charging status)VFLLED light

USB

After booting, main menu shows in default. Press Navigation buttons to

select the function module, then press “ ” button to enter into the

corresponding interface.

Title Bar: Highlight when the function module is selected.

Main Menu

2020-10-01 THU 10:08

Measurement

status

No. Dis. Loss Ref. dB/km C.Loss

A-B: 000.000km 0.000dB 0.000dB/km

A 0.000km

B 0.940km

4.00dB/div

X Y

0.200km/div

201001.sor

Measure Info: 1310nm 2.0km 10ns

1/6

3/6

4/6

5/6

0.000

4.301

5.589

18.712

0.00

0.12

-0.05

-.-- -.-- -.--

-.--

-51.74

-54.67

-41.03

0.28

0.22

0.00

1.18

4.07

2/6 0.940 0.08 -51.74 0.24 0.26

2020-10-01 THU 21:25

File name

Waveform

region

Scale

Event List

Measurement

info.

Distance and

Attenuation

OTDR testing interface as following shows.

Mini OTDR

No. Dis. Loss Ref. dB/km C.Loss

Measure Info: 1310nm 2.0km 10ns

10s

Laser Radiation!

Do not look directly

to the laser!

Measure setting

Press key ENTER to edit settings.

Pulse Width

Average Time

Splice Loss

ReflectionThreshold

End Threshold

Refractive Rate

Scatter Coefficient

Manual

1000ns

120s

0.05dB

65.0dB

2.0dB

1.46832

52.1dB

Average

Optical detector

Real time analyse

Scan mode

Scan type

500m

Range

Wavelength 1550nm

2020-10-01 THU 21:25

S ET TIN G

SC A N

In OTDR interface, press “ ” button to enter into measurement setting

interface.

Under OTDR or measurement setting interface, press “ ” button

to start measurement. Press again to stop the testing during the measurement.

If “Real time analyse” is ON when Real time scan type is set, then it will

take average measurement again before stopping.

Mini OTDR--Measurement Settings

A-B: 000.000km 0.000dB 0.000dB/km

A 0.000km

B 0.940km

4.00dB/div

X Y

0.200km/div

201001.sor

2020-10-01 THU 21:25

No. Dis. Loss Ref. dB/km C.Loss

Measure Info: 1310nm 2.0km 10ns

10s

Laser Radiation!

Do not look directly

to the laser!

M A R K E R

No. Dis. Loss Ref. dB/km C.Loss

A-B: 000.000km 0.000dB 0.000dB/km

A 0.000km

B 0.940km

4.00dB/div

X Y

0.200km/div

201001.sor

Measure Info: 1310nm 2.0km 10ns

1/6

3/6

4/6

5/6

0.000

4.301

5.589

18.712

0.00

0.12

-0.05

-.-- -.-- -.--

-.--

-51.74

-54.67

-41.03

0.28

0.22

0.00

1.18

4.07

2/6 0.940 0.08 -51.74 0.24 0.26

2020-10-01 THU 21:25

After testing or open the saved waveform, then event list shows, Max. 5

events listed, if more, press “ ”“ ” to view, and the cursor will be

located in selected event, short press “ ” to choose the cursor, and

scale current waveform by pressing combined buttons.

Mini OTDR--Waveform Analysis

X-axis zoom in

0.000km

10.057km

Y-axis zoom in

A0.000km

B 10.057km

PD_074#0002 Rev.210202

Inhaltsverzeichnis

Andere TriBrer Prüfgeräte Handbücher

TriBrer

TriBrer AOT600 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung