6 | P a g e
TRIDENT AIR MINI –BY PLASMA SCIENCE
3. AIRFLOW:
Press the button quickly to switch to speeds 1–2–3–4 and
simultaneously display icons 3 and 8; the PM2.5 display willreturn after
5 seconds.
4.
TIMING / CHILD-LOCK:
Quickly pressing the timing icon, shifts the timer from 1,2,4,6,8 Hours.
Icons 4 and 9 will appear asappropriate. It will take 5 seconds to restore
the PM2.5 display. The machine emits a "beep" prompt sound when
you long press forthree seconds, turning on the "CHILD LOCK" button.
This locks all of the keys to prevent tampering by children. When you
are ready to release the child lock, long press for three seconds.
5. UVC:
Short press for UVC filter sterilization. To disable, press the button one
more time. It is not necessary to turn on UVC for normal use. The UVC
is an added assurance to disinfect filter before removing filter for wash,
especially if machine is used in high-risk area such as hospitals.
6. WIFI / FILTER RESET:
When the network has been successfully configured, the "WIFI" icon
will be on and icons 6 and 11 will blink concurrently. Push the button
for 3 seconds to enable the wifi network configuration mode.
Icon 10 and "RESET" will blink simultaneously when it is time to wash
the filters. After washing the filters and placing the clean filters back
into Trident, press the button for 5 seconds, the machine will beep to
indicate that the filter has been correctly reset.
7. DISPLAY WINDOW
8. AIRFLOW DISPLAY
9. TIMING DISPLAY
10.FILTER RESET
11.WIFI CONNECTIVITY DISPLAY
WIFI CONNECTION
DOWNLOAD APP AND REGISTRATION
1. To download the "Smart Life" APP, scan the QR code, or
“TUYA” APP. To install the APP, you may also search for
"Smart Life" or “TUYA” in the Google Play or iOS APP stores.
2. Launch the APP and select "Register" to create an account
with "Smart Life" using your phone number or email address.
Then, log into the APP.
3. Click "add device" or press "+" in the top right corner of the
"Smart Life APP" homepage to launch it. There are two ways
to access the "add device" page: manually adding WiFi or
automatically looking for devices.
When adding a device manually, select any product from the
product ring to enter a new homepage and make sure the
indicator light flashes quickly.
Two configuration options are offered by the devices. Tap "Other
techniques" in the top right corner of the home page to enter Easy
mode and AP mode. From there, select one of the modes to
connect to WiFi.
Ensure that both your phone and smart gadget are powered on and
linked to your WiFi. If the WiFi indicator on a smart device does not
flash, please press and hold the light ring's center button for at least
5 seconds until the indicator light begins to flash rapidly, indicating
the device is ready for configuration.
