System administration via SMS
1. Changing the administrator‘s password
To ensure safety, change the default administrator SMS password.
Send an SMS in this format:
PSW 123456 xxxxxx
Default administrator password
The new 6-digit administrator password
2. Allow only authorized users to control the system
You can limit the users who can control the system. Send an SMS from
the administrator‘s phone with people‘s phone numbers and names:
SETU xxxxxx +PHONENo#NAME
6-digit administrator password
User‘s name or email address
3. Give the system administrator‘s rights to another user
The administrator‘s rights can be given to other users. They will
receive system‘s notifications and will be able to add users. Send an
SMS in this format:
SETA xxxxxx NoX=+PHONENo#NAME
6-digit administrator password
X –administrator‘s number in the list
User‘s name or email address
The list of SMS commands
Request information about the controller. The
response will include: controller type, IMEI
number, serial number and software version.
E.g.: INFO 123456
Turn on the output. „x“–output number.
E.g.: OUTPUT5 123456 ON
Turn off the output. „x“ –output number.
E.g.: OUTPUT5 123456 OFF
Turn on the output for a period of time.
„ttt“ is pulse duration in seconds, from 1
to 999. E.g.:OUTPUT5 123456 PULSE=002
Input status inquiry. E.g.: ASKI 123456
Output status inquiry. E.g.: ASKO 123456
After adding the first user‘s phone number to GV17 phone number list,
the controller will only respond to calls from the listed phone numbers.
The controller will ignore other calls.
If you type No1 in the SMS message, you will transfer your administrator‘s
rights to another user.
