Triner Scale 1200g High Precision Scale Bedienungsanleitung

UG Version 1.2_12-30-13

1200g High Precision Scale

Userʼs Guide

1200g High Precision Scale

Legal for Trade

Includes RS-232 interface port

Triner Scale & Mfg.Co., Inc.

8411 Hacks Cross Road

Olive Branch, MS 38654

(800) 238-0152

www.trinerscale.com

!!!! CALIBRATION WARNING !!!!

Calibration AND inspection of calibration properties

is prohibited unless done so by

a qualified scale technician.

User’s Guide | 1200g

Table of Contents

Introduction........................................................2

Specifications ....................................................2

Set Up ...............................................................3

Key Functions ....................................................4

Operation...........................................................5

Zeroing the Indicated Weight.....................5

Taring........................................................5

Weigh an Item in a Container ....................6

Accumulate Weights..................................6

View Audit & Calibration Counts................7

Adjusting the Parameters...................................7

Parameters Charts.............................................8-10

Output of the Weight..........................................11

Output to a Receipt Printer ........................11

Output to a PC ..........................................12

Output to a Remote Display ......................13

Error Codes .......................................................14

Weighing Unit Conversions................................15

!!!! NOTICE !!!!

The CZ 1200 High Precision scale is a very sensitive and

delicate electronic instrument.

For accuracy of weighments, certain factors regarding

location of use must be taken into consideration, i.e.,

-Place on very stable surface

-Away from air movement

-Away from vibrations

-Away from electronic noise

-Away from magnetic fields.

User’s Guide | 1200g

Introduction

The CZ Precision balance is a highly accurate, fast

and versatile general purpose balance scale.

Construction includes a stainless steel weighing

pan on an ABS base assembly.

The keypad keys are light touch and the display is

large easy to read liquid crystal (LCD). The LCD

features a white LED backlight and includes a

percentage of capacity bar graph.

Operating features include automatic zero tracking,

and an accumulation facility that allows the count to

be stored and recalled as an accumulated total.

Specifications

Capacity: 1200g x 0.1g

NTEP Certified, Legal for Trade

Accuracy Class II

Interface: RS-232 Output

Stabilization Time: 2 Seconds typical

Operating Temperature: 10°C~25°C / 50°F~77°F

Power Supply: (external) 9V/800mA AC adapter

Calibration: Automatic External

ADC: Sigma delta

Internal Counts: 600,000 or 1,200,000

Display: Backlit LCD, 6 digits, loading bar graph

Housing: ABS Plastic

Pan: Stainless Steel

Dimensions: 180mm W x 220mm D x 85mm H

User’s Guide | 1200g

Set Up

PRECAUTIONS AND REQUIREMENTS

FOR PRECISION WEIGHING

Precision scales should be placed in a location that

will not degrade the accuracy.

Avoid extremes of temperature. Do not place in

direct sunlight or near air conditioning vents.

Avoid unsuitable tables. The tables or floor must be

rigid and not vibrate. Do not place near vibrating

machinery.

Avoid unstable power sources. Do not use near

large users of electricity such as welding equipment

or large motors.

Avoid high humidity that might cause condensation.

Avoid direct contact with water. Do not spray or

immerse the scales in water.

Avoid air movement such as from fans or opening

doors. Do not place near open windows. Keep the

scales clean.

Do not stack material on the scales when they are

not in use.

THE CZ PRECISION SCALE

Level the scale by adjusting the four feet. The scale

should be adjusted such that the bubble is centered

and the scale does not rock from corner to corner.

Attach the adapter to connector on the side of the

scale, plug into standard 110VAC outlet.

User’s Guide | 1200g

Key Functions

ZERO/ENTER

ZERO: Sets zero point for all subsequent weighing.

ENTER: For setting parameters or entering other

functions.

TARE

Tares the scale. Stores the container weight in

memory as a tare value, subtracts the tare value

from the total/gross weight and shows the resulting

net weight.

PRINT/ESC

PRINT: To print the results to a PC or printer using

the optional RS-232 interface.

ESC: Return to normal operation when the scale is

in a parameter setting mode, avoids saving recently

entered changes.

UNIT/MODE

UNIT: Selects either grams, pounds, carat ,ounce

etc. for the weighing unit when weighing mode.

MODE: Press during start up self-checking to

access parameter setting mode. When in settings

mode, press to proceed through parameters.

Press the S key during self-checking to display

the number audit operations.

Press the P key during self-checking to display

the number of calibrations performed. When the

counter becomes full, it will start over at 0.

ON/OFF

Power on, power off.

User’s Guide | 1200g

Operation

ZEROING THE INDICATED WEIGHT

Press the ZERO key at any time to set the zero

point from which all other weighing and counting is

measured, within 10% of power up zero. This will

usually only be necessary when the platform is

empty. When the zero point is obtained the display

will show the icon indicating center of zero.

The scale has an automatic re-zeroing function to

account for minor drifting or accumulation of

material on the platform. When the weight goes

over 20 % of the full capacity, automatic zeroing

is disabled.

TARING

If necessary, zero the scale by pressing the

ZERO key. Place the container only, no contents,

on the scale platform.

Press the TARE key to tare the scale. The weight

that of the container is stored as the tare value

and that value is subtracted from the display,

leaving zero on the display.

The “NET" indicator will be on. As product is

added only the weight of the product will be

shown. When the container is removed a

negative value will be shown.

User’s Guide | 1200g

WEIGHING AN ITEM IN A CONTAINER

To determine the weight of an item(s) in a

container, first tare the empty container then place

the item(s) in the container. The display will show

the net weight.

TO ACCUMULATE WEIGHTS

1) Place first item on the scale platform.

2) After the stable icon displays ( ), press the

PRINT key.

3) “ACC 1” will display.

4) Remove all weight from scale platform, then

place next item to be weighed on the platform.

5) Per #2 above, press the PRINT key

6) “ACC 2” will display, followed by the accumulated

total.

7) Repeat the procedure as required to accumulate

all weights.

TO RECALL ACCUMULATED WEIGHT: With

nothing on the platform, press the PRINT key.

TO DELETE ALL ACCUMULATED WEIGHT IN

MEMORY: Power off, power on the scale.

User’s Guide | 1200g

VIEW AUDIT & CALIBRATION COUNTS

Calibration Counter

Press P key during self-checking, display will show

number of times scale has been calibrated. When

the counter becomes full, it will start over

at 0.

Audit Operation Counter

Press S key during self-checking, display will show

number of audit operations.

Adjusting the Parameters

To access the parameter settings, press the MODE

key during the start up self-checking.

F1 Unt will display. Press the MODE key to move

through the available parameters.

To access the settings in the parameter showing in

the display (such as F1 Unt), press the ENTER key.

The first setting will display (such as “on ct” in the

F1 Unt parameter).

To navigate through the available options for the

setting, press the MODE key (such as “on ct” or oFF

ct”).

To accept the option being displayed, press the

ENTER key. If more than one setting is available in

the parameter, the next setting will display.

To save the settings, press the Enter key as needed

to return to the parameter title (such as F1 Unt),

then press the ESC key.

See the following pages for parameters charts.

User’s Guide | 1200g

FUNCTION PARAMETERS

PARAMETER

DESCRIPTION, OPTIONS

F1 Unt

UNITS OF WEIGHMENT THAT CAN BE

DISPLAYED

Note: The CZ 1200 displays weight in

grams by default. Weight can be displayed

in the various units listed below by pressing

the UNIT key. The scale will power on

displaying the unit it was displaying when

powered off.

The following units can be enabled or

disabled:

ct / lb / oz / ozt / dwt

F2 bl

BACKLIGHT SETTING

EL on: EL backlight always on

EL Au: EL backlight automatically turn on

EL off: El backlight always off

F3 cal

CAUTION!

Calibration is

to be

performed by

a qualified

scale

technician

ONLY!

STANDARD CALIBRATION

After enter cal mode, the display

will show unLoAd. Remove all

weight from the pan and wait for

stable.

After stable, balance will show loAd C,

put put calibrate weight on the pan:

Calibration weight for CZ 1200 model =

1000g

DO NOT PRESS ANY KEYS AFTER

PLACING WEIGHT ON THE SCALE.

After successful automatic calibration,

the display will show pass, calibration

complete.

Inhaltsverzeichnis

Andere Triner Scale Skala Handbücher

Triner Scale

Triner Scale 7600 Bedienungsanleitung

Triner Scale

Triner Scale 600-ESeries Bedienungsanleitung

Triner Scale

Triner Scale TS-70PX Installationshandbuch

Triner Scale

Triner Scale TS-PFS Bedienungsanleitung

Triner Scale

Triner Scale TS60-1010 Bedienungsanleitung

Triner Scale

Triner Scale 7600E Bedienungsanleitung

Triner Scale

Triner Scale TSM Series Bedienungsanleitung

Triner Scale

Triner Scale TS-70PX Bedienungsanleitung

Triner Scale

Triner Scale TSM5-28-LS Bedienungsanleitung

Triner Scale

Triner Scale VersiPost VP-70 Bedienungsanleitung

Triner Scale

Triner Scale TP-10 Bedienungsanleitung

Triner Scale

Triner Scale TS-70MC Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung