Recording Video
Long press or pull of the image capture trigger the screen will
prompt “record video?”, if you select “Yes” at this time, please press
the SELECT/ENTER button and video will start to be recorded.
Transferring Saved Images and Video
The saved images can be transferred and viewed by connecting
with a computer through Micro USB.
Recalling Stored Images
Open the USB protective cover. Use USB cable to connect the USB
port and then computer to read the images or save it into computers.
The supported operating system through verification includes:
winxp, win7, win 8, win10, Apple system.
It is suggested to use the attached USB line or USB line with
higher quality.
Note:
When connecting with a computer, pull off the data line after
selecting “pop out device safely” to avoid causing file system
damage and other problems. If “unable to save” and other problems
occur, you may find the hard disc in the computer and fix it.
Press the left of “MENU” key and the menu bar appears. They are “Image
registration”, “Images”, “Videos”, “Color palette”, “Emissivity” and
“Settings” submenus.
Image Alignment (Submenu)
Description of Image Overlapping (Fusion)
Image overlapping makes it easier for users to understand the infrared
images by using aligned visible images and infrared images. The use
of image overlapping can capture the visible image of every infrared
image so as to display the temperature distribution in the target region
correctly and share with other people more effectively.
Adjusting of Image Overlapping (Visible and
Thermal Cameras)
Press the button to enter the main menu and select “
” (Image registration) in the main menu.
Press the “SELECT/ENTER” button to enter the image overlap adjustment
mode. Press the navigation keys (up, down, left and right buttons) to perform
the visible image shift operation.
Press the “SELECT/ENTER” button to exit the image blending mode (Note: If
there is no operation for more than 6 seconds, the image blending mode will
be automatically exited).
