Tripp Lite B110-SP-10G Bedienungsanleitung

In-Line Network

Surge Protector,

10 Gbps, Cat6a

Model: B110-SP-10G

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

Quick Start Guide

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Español 9 • Français 17 • Русский 25

• B110-SP-10G 10 Gbps In-Line Network Surge Protector

• Grounding Wire

• Mounting Screws (x4)

• Screw Anchors (x4)

• Grounding Wire Screw

• Quick Start Guide

• Protects your network equipment’s inputs and outputs against electro-

static discharge (ESD), power surges and cable discharge events

• Meets the following IEC regulations:

oIEC 61000-4-2: Indirect discharge (4kV), direct discharge (8kV)

oIEC 61000-4-5 (Lightning) 2kA (8/20µs), 1kV (8/20µs)

• Easy to connect between network source and device using

standard Cat5/5e/6/6a/8 cabling

• Rapid reaction time under 1 ns helps prevent damage from

lightning/power surges

• Supports Ethernet network data transmission speeds up to 10 Gbps

• Plug-and-play operation with no software required for easy,

immediate installation

• Supports distance between the B110-SP-10G and equipment up

to 330 ft. (100 m)

• Compliant with the Federal Trade Agreements Act (TAA) for GSA

(General Services Administration) Schedule and other federal

procurement contracts

Package Includes

Product Features

Note: The following instructions assume that two network devices are

currently connected together.

Single Device Protection:

1. Disconnect the installed patch cable from the device you wish

to protect and attach it to the “Cable End” of the In-Line 10G

Network Surge Protector.

2. With a user-supplied Cat5/5e/6/6a/8 patch cable, connect the

device to be protected to the “Equipment End” of the In-Line

10G Network Surge Protector.

Note: For best protection performance, the patch cable between

the “Equipment End” on the B110-SP-10G and the equipment

to be protected should not exceed 330 ft. (100 m). Tripp Lite’s

N261-Series Cat6a Snagless Patch Cables are recommended.

3. Connect the ground wire to the In-Line 10G Network Surge

Protector and then to earth ground.

Installation

Etherent Switch Hub (10 Gbps)

10GB

Network Card PC

Installation

�

B110-SP-10G

1Up to 15 ft. (5 m) Cat6a cable

2Up to 330 ft. (100 m) Cat6a cable

Installation

Multiple Device Protection:

Note: The maximum distance between any two In-Line 10G Network

Surge Protectors is 240 ft. (73 m).

1. Disconnect the installed patch cables from both of the devices

you wish to protect.

2. Connect a B110-SP-10G to each end of the previously

uninstalled patch cable, ensuring both ends of the patch cable

are connected to the “Cable End.”

3. With user-supplied Cat5/5e/6/6a/8 patch cables, connect the

“Equipment End” of each Surge Protector to the network devices

you wish to protect.

Note: For best protection performance, the Cat5/5e/6/6a/8 patch

cable between the “Equipment End” of the B110-SP-10G and

the network equipment to be protected should not exceed 240 ft.

(73 m). Tripp Lite’s N261-Series Cat6a Snagless Patch Cables are

recommended.

4. Connect the ground wire to each In-Line 10G Network Surge

Protector and then to earth ground.

Installation

�

Etherent Switch Hub (10 Gbps)

10GB

Network Card PC

B110-SP-10G

1Up to 15 ft. (5 m) Cat6a cable

2Up to 240 ft. (73 m) Cat6a cable

Speciﬁcations

Input / Output Connectors RJ45 (Female)

ESD Protection 15kV (Air), 8kV (Contact)

Lightning Protection 2kA (8/20µs) / 6kV (8/20µs)

Lightning Protection Reaction Speed <1 ns

Operating Temperature Range 32 to 104°F / 0 to 40°C

Storage Temperature Range 5 to 122°F / -15 to 50°C

Relative Humidity 0 to 85%, non-condensing

Bandwidth (Data Rate) Up to 10 Gbps

Return Loss (100Ω) 16 dB

Dimensions 2.63 x 3.43 x 1.06 inches /

67 x 87 x 27 mm

Weight 0.28 lb. / 127 g

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

21-09-024 933FAB_RevA

Warranty and Product Registration

2-Year Limited Warranty

Tripp Lite warrants its products to be free from defects in materials and workmanship for a period

of two (2) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an

authorized Tripp Lite service center with transportation charges prepaid and must be accompanied

by a brief description of the problem encountered and proof of date and place of purchase. This

warranty does not apply to equipment, which has been damaged by accident, negligence or

misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, Tripp Lite is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment,

loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically

entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or

effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice. Photos and illustrations may differ slightly from actual products.

Supresor de Sobretensiones

para Red en Línea,

10 Gbps, Cat6a

Modelo: B110-SP-10G

1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support

Guía de Inicio Rápido

English 1 • Français 17 • Русский 25

• B110-SP-10G – Supresor de Sobretensiones para Red en Línea

de 10 Gbps

• Conductor de Tierra

• Tornillos de Instalación (x4)

• Tornillos de Anclaje (x4)

• Tornillo de Conductor a Tierra

• Guía de Inicio Rápido

• Protege las entradas y salidas de su equipo de red contra descarga

electrostática [ESD], sobretensiones y eventos de descarga de cable

• Cumple con los siguientes reglamentos de IEC:

oIEC 61000-4-2: Descarga indirecta (4kV), descarga directa (8kV)

oIEC 61000-4-5 (Rayo) 2kA (8µs / 20µs), 1kV (8µs / 20µs)

• Fácil de conectar entre la fuente y el dispositivo de red usando

cableado Cat5 / Cat5e / Cat6 / Cat6a / Cat8

• El rápido tiempo de reacción inferior a 1 ns ayuda a evitar daños por

rayos o sobretensiones

• Soporta velocidades de transmisión de datos de red Ethernet hasta 10 Gbps

• Operación de conectar y usar sin necesidad de software para una

instalación fácil e inmediata

• Soporta distancia entre el B110-SP-10G y el equipo hasta a 100 m

[330 pies]

• Cumple con la Ley Federal de Acuerdo Comerciales [TAA], que lo hace

elegible para el Programa GSA [General Services Administration] y

otros contratos para compras federales.

El Paquete Incluye

Características del Producto

Inhaltsverzeichnis

Sprachen:

Andere Tripp Lite Überspannungsschutz Handbücher

Tripp Lite

Tripp Lite TLP606DMUSB Bedienungsanleitung

Tripp Lite

Tripp Lite ISOTEL4ULTRA Bedienungsanleitung

Tripp Lite

Tripp Lite ISOTEL8ULTRA Bedienungsanleitung

Tripp Lite

Tripp Lite MT-6PLUS Bedienungsanleitung

Tripp Lite

Tripp Lite PM6NS Bedienungsanleitung

Tripp Lite

Tripp Lite TLP602 Bedienungsanleitung

Tripp Lite

Tripp Lite B110-SP-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite DB15 Bedienungsanleitung

Tripp Lite

Tripp Lite TLP606TELPP Bedienungsanleitung

Tripp Lite

Tripp Lite SK6-0B Bedienungsanleitung

Tripp Lite

Tripp Lite B110-SP-HDMI Bedienungsanleitung

Tripp Lite

Tripp Lite SUPER6TEL12 Bedienungsanleitung

Tripp Lite

Tripp Lite Data Shield DB25-ALL Bedienungsanleitung

Tripp Lite

Tripp Lite ISOBAR825ULTRA Bedienungsanleitung

Tripp Lite

Tripp Lite TLP712B Bedienungsanleitung

Tripp Lite

Tripp Lite MT-6PLUS Bedienungsanleitung

Tripp Lite

Tripp Lite TLP82D Bedienungsanleitung

Tripp Lite

Tripp Lite ISOBAR8ULTRA Bedienungsanleitung

Tripp Lite

Tripp Lite SPIKESTIK Bedienungsanleitung

Tripp Lite

Tripp Lite 93-2485 Bedienungsanleitung

Tripp Lite

Tripp Lite isobar IBAR4ULTRAUSBB Bedienungsanleitung

Tripp Lite

Tripp Lite SPS606HGRA Bedienungsanleitung

Tripp Lite

Tripp Lite Protect It! TLP310DMUSB Bedienungsanleitung

Tripp Lite

Tripp Lite ISOBAR6ULTRA Bedienungsanleitung

Beliebte Überspannungsschutz Handbücher anderer Marken

ELAC

ELAC ProteK PR91-W Bedienungsanleitung

Tsubaki

Tsubaki TSM4000M1 Bedienungsanleitung

QVS

QVS PP134C Bedienungsanleitung

CyberPower

CyberPower CSP604T Bedienungsanleitung

Davis Instruments

Davis Instruments Radio Surge Protector Bedienungsanleitung

M-system

M-system MGA-100 Bedienungsanleitung

CyberPower

CyberPower CSP706T Bedienungsanleitung

CyberPower

CyberPower B300WRC1 Bedienungsanleitung

M-system

M-system MGD-24 Bedienungsanleitung

Leviton

Leviton 51120-3R Bedienungsanleitung

Panamax

Panamax MAX 5400-EX Bedienungsanleitung

CyberPower

CyberPower B1006T Bedienungsanleitung

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Bedienungsanleitung

Minuteman

Minuteman MMS7120RCT Bedienungsanleitung

Leviton

Leviton 52412-DS3 Bedienungsanleitung

Savio

Savio LZ-07 Bedienungsanleitung

Siemens

Siemens HNM3M120 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Bedienungsanleitung