Tripp Lite B119-003-UHD Bedienungsanleitung
1
Owner’s Manual
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
3-Port HDMI Switch with
Remote Control, 4K x 2K
Model: B119-003-UHD
Este manual esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего руководства представлена на
веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support
18-01-070-933768-EN.indd 1 2/6/2018 3:53:02 PM
2
Package Contents
Optional Accessories
System Requirements
• B119-003-UHD
• Remote Control
• External Power Supply (Input: 100–240V, 50/60 Hz, 0.2A; Output: 5V 1A)
•
(4) International Plug Adapters (North America, Europe, U.K. and Australia)
• Mounting Hardware
• Owner’s Manual
• P569-XXX-CERT Premium High-Speed HDMI with Ethernet Cables
• P520-006 RS-232 Serial Extension Cable
• Source device(s) with HDMI outputs
• Display device with HDMI input
18-01-070-933768-EN.indd 2 2/6/2018 3:53:02 PM
3
Product Features
• Switch between three HDMI source devices (Blu-ray™ player, cable box,
PC, etc.) connected to a single display
• Switch devices via push button, RS-232 port control or the included
remote control
• Supports Ultra High Definition (UHD) video resolutions up to 4096 x 2160
(4K x 2K) @ 60 Hz
• Supports up to 36-bit Deep Color (12 bits per channel)
• Supports standard, DSD (Direct Stream Digital) and HD (HBR) audio
• Supports 7.1-channel surround sound, DTS-HD™ and Dolby®TrueHD
audio
• Supports 300 MHz/3.4 Gbps per channel bandwidth (10.2 Gbps total)
• Meets HDCP 2.2 and HDMI 2.0 standards
• Supports 3D and EDID
• Plug-and-play operation with no software or drivers required
18-01-070-933768-EN.indd 3 2/6/2018 3:53:02 PM
4
Connection
1Optional: Attach the included mounting hardware to the unit, and
mount to a desired location.
2Make sure power to all devices that you will be connecting is turned off.
3
Optional: Connect a DB9 cable between the RS-232 serial port on the unit
and the DB9 serial port on the computer you will be using to control it.
4Connect an HDMI source device to an HDMI Input port on the switch.
Note: The length of the HDMI cable connecting the source to the switch must not
exceed 16 ft. (5 m).
5Repeat step 3 to connect up to two more source devices to the
remaining Input ports on the switch.
6Connect the HDMI Output port on the switch to the HDMI input port of
your display.
Note: The length of the HDMI cable connecting the switch to the display must not
exceed 16 ft. (5 m).
7Connect the external power supply to the switch. Plug it into a Tripp Lite
surge protector, uninterruptible power supply (UPS) or power distribution
unit (PDU). The red LED on the unit will illuminate to indicate power is
being received.
Standard Installation
DVD
DVD
DVD
HDMI Switch
Display
18-01-070-933768-EN.indd 4 2/6/2018 3:53:03 PM
5
Standard Installation
8Turn on the power to the HDMI source devices and display. The blue
LEDs on the unit will illuminate to indicate the signal is being received.
9Switch between source devices using the Select push button on the
unit, RS-232 serial control or the included remote control.
See the RS-232 Serial Control section in this manual for details on
controlling the switch using Terminal Emulation Software.
RS-232 Serial Control
Before using RS-232 Serial Control, you must first go into your Terminal
Emulation Software and update the COM port settings.
1Go to the Setup dropdown menu, and select the Serial Port Option.
18-01-070-933768-EN.indd 5 2/6/2018 3:53:03 PM
6
Standard Installation
2Select the COM port that is being used, and update the remaining
settings as follows:
Baud Rate (9600)
Data (8 bit)
Parity (none)
Stop (1 bit)
Flow Control (Xon/Xoff)
18-01-070-933768-EN.indd 6 2/6/2018 3:53:04 PM
7
Standard Installation
3Next, you will need to configure your software to allow input control. Go
to the Setup dropdown menu, and select the Terminal option.
18-01-070-933768-EN.indd 7 2/6/2018 3:53:04 PM
8
Standard Installation
4Update the following settings:
Receive (AUTO)
Local Echo (enable)
The remaining settings can stay as they are.
5Once these settings are updated, the Terminal Emulation Software will
recognize the switch, allowing you to enter commands to control it. The
following table lists the available commands. Please note that hitting the
backspace key will revise a command.
Action Command
HDMI 1 Input port0R
HDMI 2 Input port1R
HDMI 3 Input port2R
Power On poweronR
Power Off poweroffR
18-01-070-933768-EN.indd 8 2/6/2018 3:53:04 PM
9
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions, try the troubleshooting tips:
1. Is the external power supply that came with the product connected
and plugged into a working power source? For the product to function
properly, the switch must be connected to and receiving power from an
external power supply.
2. Was the power to the connected devices turned off prior to
installation? If not, restart them.
3. What resolution are you trying to reach? The B119-003-UHD is
tested to support Ultra High Definition (UHD) video resolutions up to
4096 x 2160 @ 60 Hz and 36-bit Deep Color (12 bits per channel).
4.
What length HDMI cable are you using? The shorter the cable being
used, the higher the resolution you will be able to obtain. If you are not
able to get an acceptable image, try using a shorter cable or lowering your
source’s video resolution or color depth settings. See the Installation
section in this manual for details on the maximum cable distance.
5. What type of cabling are you using? Inferior cabling can result in poor
performance, so it is important you use cables that can support the video
resolution you are trying to obtain. It is recommended that you use
Tripp Lite’s P569-XXX-CERT Premium High-Speed HDMI with Ethernet
cables, as they have been tested to work with the B119-003-UHD.
6. Test your cables to ensure they are working properly. For example,
connect your HDMI cable between a source and monitor that you know
work to see if the cable is functioning.
7. Is the unit located in an area that exposes it to higher
temperatures? If the product is overheated, it will not function properly.
8. If you are having trouble getting your Terminal Emulation Software to
recognize the switch, you may need to shut down your installation and
start from the beginning.
9.
If you are still having trouble getting your Terminal Emulation Software to
recognize the switch, check to make sure your serial settings are set according
to the instructions in the RS-232 Serial Control section of this manual
18-01-070-933768-EN.indd 9 2/6/2018 3:53:04 PM
10
Specifications
Connectors
Input (3x) HDMI (Female)
Output HDMI (Female), DB9 (Female)
Video
Maximum Resolution 4096 x 2160 @ 60 Hz
Color Depth 36-bit Deep Color (12 bits per channel)
Video Amplifier Bandwidth 10.2 Gbps / 300 MHz
Environmental
Operating Temperature 32° to 140°F (0° to 60°C)
Storage Temperature -4° to 158°F (-20° to 70°C)
Relative Humidity 0% to 95%, Non-Condensing
Physical
Unit Dimensions (H x W x D) 0.8 x 6.3 x 2.0 in. (20 x 160 x 51 mm)
Unit Weight 0.54 lb. (240 g)
Power Requirements
External Power Supply 5V 1A
Power Consumption (Max) 5W
18-01-070-933768-EN.indd 10 2/6/2018 3:53:04 PM
Inhaltsverzeichnis
Andere Tripp Lite Schalten Handbücher
Tripp Lite
Tripp Lite U230-204-R Bedienungsanleitung
Tripp Lite
Tripp Lite B036-002-R Bedienungsanleitung
Tripp Lite
Tripp Lite B032-VU2 Bedienungsanleitung
Tripp Lite
Tripp Lite NetCommander B072-016-IP4 Bedienungsanleitung
Tripp Lite
Tripp Lite Minicom 0SU70036 Bedienungsanleitung
Tripp Lite
Tripp Lite Ultra-Mini U202-004-R Bedienungsanleitung
Tripp Lite
Tripp Lite B032-VUA4 Bedienungsanleitung
Tripp Lite
Tripp Lite U224-4R4-R Bedienungsanleitung
Tripp Lite
Tripp Lite B032-VUA4 Bedienungsanleitung
Tripp Lite
Tripp Lite NSU-G24 Bedienungsanleitung
Tripp Lite
Tripp Lite B005-DPUA4 Bedienungsanleitung
Tripp Lite
Tripp Lite B002A-DP2A2 Bedienungsanleitung
Tripp Lite
Tripp Lite B020-U08-19-IP Bedienungsanleitung
Tripp Lite
Tripp Lite NerDirector B020-U08-19KTAA Bedienungsanleitung
Tripp Lite
Tripp Lite U222-007-R Bedienungsanleitung
Tripp Lite
Tripp Lite B004-DUA2-K-R Montage- und Bedienungsanleitung
Tripp Lite
Tripp Lite B020-U08-19-K Bedienungsanleitung
Tripp Lite
Tripp Lite NGI-U05E Bedienungsanleitung
Tripp Lite
Tripp Lite B094-008-2E-M-F Bedienungsanleitung
Tripp Lite
Tripp Lite U460-003-3AG-C Bedienungsanleitung
