Tripp Lite SM2200RMNAFTA Bedienungsanleitung
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: SM2200RMNAFTA
Smart Pro Line Interactive 2U Rack/Tower Extended Run UPS - NAFTA assembled version of
SMART2200RMXL2U
Highlights
2200VA / 2.2kVA line interactive, extended-run 2U rack / tower UPS
Maintains sine-wave 100/110/120V nominal output over an input range of 83
to 145V
Network communications supported via HID enabled USB port, DB9 serial
port, SNMP/Web card slot and EPO interface
Current monitoring and switched PDU control via 3 individually controllable
load banks
Input: NEMA 5-20P (120V 20A / includes 5-15P plug 120V 15A) / Output: 4
NEMA 5-15/20R, 4 NEMA 5-15R (120V)
$250,000 Ultimate Lifetime Insurance (USA, Puerto Rico and Canada only)
Description
2200VA line interactive UPS system for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed
depth of only 19 inches. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Uninterruptible Power
Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage
Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages to maintain regulated 100,
110, 120v selectable output over an input range of 83-145V. Includes NEMA 5-20P input plug (with NEMA 5-15P plug option) and both NEMA
5-15R and 5-15/20R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous
communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power
management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test
data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off
(EPO) interface. Integrated 3-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current
monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount accessories
included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal
batteries and external battery packs. Attractive all-black color scheme. $250,000 connected equipment insurance;
Package Includes
SM2200RMNAFTA UPS system
PowerAlert software CD-ROM
USB, serial and EPO cabling
Owner's manual with warranty information
Features
SmartPro line interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during
overvoltages
overvoltages
Maintaints continuous operation through blackouts, voltage fluctuations and surges
Corrects line voltage conditions as low as 83V and as high as 145 back to selectable 100/110/120V nominal values
Standard internal battery set offers 16 minutes at half load (800w) and 6 minutes at full load (1600w)
Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operation
Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches
Ships with all mounting accessories for 4 post rackmount installation
Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation
Optional 2-9USTAND accessory enables small-footprint upright tower placement
Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot
HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with
the built-in ability to shutdown any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current,
battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot
Built-in Emergency Power Off (EPO) interface with cable
NEMA 5-20P input plug (user-installable NEMA 5-15P replacement plug included) / NEMA 5-15R & NEMA 5-15/20R output receptacles
Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (Each
bank controls 1 outlet per load bank)
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
$250,000 ULtimate Lifetime Insurance
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
2200
Output kVA capacity
(kVA)
2.2
Output Watt Capacity
(watts)
1600
Output kW capacity 1.6
Output power factor 0.7
Nominal Output
Voltage(s) Supported
100V; 110V; 120V
Nominal Voltage details 120V default (voltage selection via back panel dipswitches)
Frequency compatibility 50 / 60 Hz
Output voltage
regulation (line mode)
-14%, +6%
Output voltage
regulation (Battery mode)
+/- 5%
Built-in UPS output
receptacles
4 5-15R outlet(s); 4 5-15/20R outlet(s)
Built-in controllable
switched load banks
Three switchable single-outlet 5-15R load banks
Basic PDU options PDU1220 (1U / 13 5-15/20R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets);
PDU40TDUAL (0U / 40 5-15/20R outlets)
Metered PDU options PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R
outlets); PDUMV40 (0U / 32 5-15/20R outlets)
Switched PDU options PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMV20NET (0U / 24 5-15/20R outlets)
External PDU
redundancy options
*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS
models only
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
13.3A (120V), 14.6A (110V), 16.0A (100V)
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection
type
5-20P
Input circuit breaker 20A
UPS Input cord length
(ft.)
10
UPS Input cord length
(m)
3
Recommended Electrical
Service
20A 120V
BATTERY
Full load runtime
(minutes)
6 min. (1600w)
Half load runtime
(minutes)
16 min. (800w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V60-3UNAFTA (multi-pack compatible)
DC system voltage (VDC) 48
Battery recharge rate
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC94-2U
Battery Access Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79 to
overvoltages to 147
Overvoltage correction Voltage reduction of 12% applies when input is between 127 and 145 (120V), 116 and 133 (110V), 106 and 121
(100V)
Undervoltage correction Voltage boost of 12% applies when input voltage is between 96 and 108 (120V), 87 and 99 (110V), 83 and 90
(100V)
Severe undervoltage
correction
Voltage boost of 24% applies when input voltage is between 83 and 95 (120V only)
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
570
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
4 post 19 inch rackmount (mounting rail kit included)
Included mounting
accessory description
Adjustable mounting rail kit included
Installation form factors
supported with optional
accessories
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary form factor Rackmount
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
3.5 x 17.5 x 19
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
8.9 x 44.4 x 48.3
Installed whole system
total rack space height
(rack spaces)
2U
Secondary form factor Tower (requires 2-9USTAND)
Installed whole system
dimensions in secondary
form factor (height x
width x depth / inches)
17.5 x 3.5 x 19
UPS dimensions in
secondary form factor
(height x width x depth /
cm)
44.4 x 8.9 x 48.3
UPS / Power Module
weight (lbs)
64
UPS / Power Module
weight (kg)
29.1
UPS Shipping
dimensions (height x
width x depth / inches)
9 x 23.5 x 20
UPS Shipping
dimensions (height x
width x depth / cm)
22.9 x 59.7 x 50.8
Shipping weight (lbs) 72
Shipping weight (kg) 32.7
UPS housing material Steel
Cooling method Fan
Installed whole system
dimensions in secondary
form factor (height x
width x depth / cm)
44.45 x 8.89 x 48.26
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
168.2
Battery mode BTU / hr.
(full load)
604.4
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
83 (120V), 87 (110V), 83 (100V)
High voltage transfer to
battery power (setpoint)
145 (120V), 133 (110V), 121 (100V)
SPECIAL FEATURES
Grounding lug Back panel grounding lug
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI); ROHS (Restriction of Hazardous Substances)
WARRANTY
Product Warranty Period
(Worldwide)
2-year limited warranty
Connected Equipment
Insurance (U.S., Canada
& Puerto Rico)
$250,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type Related Model Description Qty.
Audio Cables CT120 Instant-Read- AC Outlet Circuit Tester 1
Extended Warranties WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA
1
Extended Warranties WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA or less
1
External Battery Packs BP48V24-2U BP48V242U - External Battery Pack for UPS System 1
External Battery Packs BP48V60RT-3U External Battery Pack and Cable. 3U, Expandable, Blue 2-Point
Connector
1
Power Distribution PDU1220 Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
Power Distribution PS7224-20 Tripp Lite Power Strip - Multiple outlets wherever you need them 1
Rackmount/Wallmount Kits 2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select
Rackmount UPS Systems
1
SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
1
SNMP Accessories SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1
Software WATCHDOGSW WatchDog Service Monitoring / Reboot Software 1
Surge Protectors DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial
lines
1
Surge Protectors DNET1 Network Surge Suppressor - Essential protection for data and
communication lines
1
Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and
communication lines
1
Tower Stands 2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1
UPS Accessories MODBUSCARD For remote monitoring and control via MODBUS protocol 1
USB Hubs/Accessories U022-010 10-ft. USB2.0 A/B Gold Device Cable
(A Male to B Male)
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3540.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Inhaltsverzeichnis
Andere Tripp Lite UPS Handbücher
Tripp Lite
Tripp Lite OmniSmart OMNI700ISO Bedienungsanleitung
Tripp Lite
Tripp Lite INTERNET550U Bedienungsanleitung
Tripp Lite
Tripp Lite IO700NAFTA Bedienungsanleitung
Tripp Lite
Tripp Lite BC Personal Datashield BCPERS300 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU80KTV Installationsanleitung
Tripp Lite
Tripp Lite SmartOnline SU10000RT3U2TF Bedienungsanleitung
Tripp Lite
Tripp Lite InternetX550AVR Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU80KX2 Installationsanleitung
Tripp Lite
Tripp Lite SUPDM15 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU2200RMNAFTA Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMART500RT1U Bedienungsanleitung
Tripp Lite
Tripp Lite BCPRO850 Konfigurationshandbuch
Tripp Lite
Tripp Lite SmartPro SMX5000XLRT3U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline 5KVA-6KVA Bedienungsanleitung
Tripp Lite
Tripp Lite OmniPro 300VA Bedienungsanleitung
Tripp Lite
Tripp Lite Line-Interactive UPS System SMART750USB Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU2000RTXLCD2U Bedienungsanleitung
Tripp Lite
Tripp Lite ECO350UPS Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SUINT1500LCD1U Bedienungsanleitung
Tripp Lite
Tripp Lite OmniSmart OMNISMART1050 Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
