Tripp Lite SMART1000RMXL2U Bedienungsanleitung
SmartPro 120V 1kVA 900W Line Interactive Sine
Wave UPS, 2U Rack/Tower, Extended Run,
SNMPWEBCARD Option, USB, DB9 Serial
MODEL NUMBER: SMART1000RMXL2U
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply(UPS)
with built-in Auto-Voltage Regulation(AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 97% full load efficiency offers
reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD
network interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.
Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring
software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency
Power Off(EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary
alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART1000RMXL2U line interactive 2U rack/tower UPS with 1000VA / 1kVA / 900 watt capacity
Line interactive UPS with Automatic Voltage Regulation(AVR) corrects brownouts and overvoltages from 83 to 147V
NEMA 5-15P input plug; 8 NEMA 5-15R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 97% full load efficiency rating offers reduced power consumption and BTU emisssions
Internal batteries offer 18 minutes at 50% load(450W) and 6.3 minutes at 100% load(900W)
Extended runtime is available with optional BP36V15-2U(limit 1); BP36V42-3U(multi-pack compatible); BP36V27-2US(multi-pack compatible), Output is
reduced to 1200 watts maximum with external battery packs
Highlights
1kVA / 1000VA / 900W line
interactive 2U rack/tower UPS,
Sine Wave
120V output, Corrects brownouts
and overvoltages from 83V to
147V
0.9 Power Factor, Interactive
LCD interface
Extended runtime options up to
800W
4 post compatible mounting
accessories
97% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
SNMPWEBCARD option
120V NEMA 5-15P input, 8
NEMA 5-15R outlets
Package Includes
SMART1000RMXL2U UPS
system
PowerAlert Software with USB,
Serial & EPO cabling
4 post rackmount installation kit
Instruction manual
1 / 5
External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND
enables tower placement
Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 1000
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 900
Output Capacity Details Output is reduced to 800 watts maximum when used with external battery packs
Power Factor .9
Nominal Output Voltage(s)
Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
Mode) 120V (+6%, -14%)
Output Voltage Regulation (Battery
Mode) +/-5%
Output Receptacles (8) 5-15R
Load Management Receptacles Two switchable two outlet 5-15R load banks
Output AC Waveform (AC Mode) Pure Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 9.2A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-15P
UPS Input Cord Length (ft.) 10
UPS Input Cord Length (m) 3
2 / 5
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 6.3 min. (900w)
Half Load Runtime (min.) 18 min. (450w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
External Battery Pack Compatibility BP36V15-2U(limit 1); BP36V42-3U(multi-pack compatible); BP36V27-2US(multi-pack compatible)
DC System Voltage (VDC) 36
Battery Recharge Rate (Included
Batteries) Less than 4.5 hours from 10 to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge RBC93-2U
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, replaceable batteries
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
Overvoltage Correction Input voltages between 127 and 147 are reduced by 12%
Undervoltage Correction Input voltages between 104 and 83 are boosted by 14%
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options
(see manual for detailed LCD configuration and monitoring options)
Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
EMI / RFI AC Noise Suppression Yes
AC Suppression Response Time Instantaneous
PHYSICAL
Included Mounting Accessory
Description 4 post rackmount installation accessories included
3 / 5
Installation Form Factors Supported
with Optional Accessories 2 post rackmount(2POSTRMKITWM); Wallmount(2POSTRMKITWM); Tower(2-9USTAND)
Primary Form Factor Rackmount
UPS Power Module Dimensions
(hwd, in.) 3.45 x 17.3 x 13.45
UPS Power Module Dimensions
(hwd, cm) 8.8 x 43.9 x 34.2
Rack Height (U Spaces) 2
UPS Power Module Weight (lbs.) 45.5
UPS Power Module Weight (kg) 20.7
UPS Shipping Dimensions (hwd / in.) 9 x 23.5 x 23.5
UPS Shipping Dimensions (hwd /
cm) 22.9 x 59.7 x 59.7
Shipping Weight (lbs.) 56.5
Shipping Weight (kg) 25.7
Cooling Method Fan
UPS Housing Material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 89
Battery Mode BTU / Hr. (Full Load) 540
AC Mode Efficiency Rating (100%
Load) 97%
COMMUNICATIONS
Communications Interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB, DB9 and EPO cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at
http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
LINE / BATTERY TRANSFER
Transfer Time 4 milliseconds (AC to battery mode), 3 millisecond (Battery to AC mode)
4 / 5
Low Voltage Transfer to Battery
Power (Setpoint) 83
High Voltage Transfer to Battery
Power (Setpoint) 147
SPECIAL FEATURES
Cold Start (Startup in Battery Mode
During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks; Schedulable daily hours of
economy mode operation
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance
© 2016 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
http://www.tripplite.com/products/product-certification-agencies
5 / 5
Inhaltsverzeichnis
Andere Tripp Lite UPS Handbücher
Tripp Lite
Tripp Lite SmartPro 3U Bedienungsanleitung
Tripp Lite
Tripp Lite AVR Series Bedienungsanleitung
Tripp Lite
Tripp Lite OmniPro 300VA Bedienungsanleitung
Tripp Lite
Tripp Lite OmniSmart OMNI700ISO Bedienungsanleitung
Tripp Lite
Tripp Lite AVR550U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMX700HG Bedienungsanleitung
Tripp Lite
Tripp Lite AVRX Series Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline 220/380 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU5000RT3UHV Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMART1500RMXL2Ua Bedienungsanleitung
Tripp Lite
Tripp Lite OmniSmart Full Isolation UPS Systems... Bedienungsanleitung
Tripp Lite
Tripp Lite ECO UPS System Bedienungsanleitung
Tripp Lite
Tripp Lite AVRX750UF Bedienungsanleitung
Tripp Lite
Tripp Lite OMNIVS1000 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMART5000RT3U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU5000RT4UTF Konfigurationshandbuch
Tripp Lite
Tripp Lite SmartOnline SV Series Bedienungsanleitung
Tripp Lite
Tripp Lite SMART550USBWD Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMX3000XLRT2UA Bedienungsanleitung
Tripp Lite
Tripp Lite SUPDM16 Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
