Tripp Lite SMART700HG Bedienungsanleitung
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model Number: SMART700HG
SmartPro Medical Grade .7kVA 120V Line interactive Tower UPS, full isolation, USB & Serial ports
Highlights
700VA line interactive tower UPS
Maintains 120V nominal output over an input range of 82 to 142V
Professional features include serial port, hospital grade plug & outlets, built-in
isolation transformer and UL60601-1 listing
Input: NEMA 5-15P (120V 15A) / Output: 4 NEMA 5-15R (120V)
Leakage current less than 100 microamps
Description
Tripp Lite's SMART 700HG offers medical-grade UPS protection with built-in line interactive voltage regulation, intelligent monitoring and
unattended shutdown capability. UL 60601-1 listed as medical electrical equipment. Built-in isolation transformer with Faraday shield removes
common mode noise while maintaining full AC surge suppression in all modes less than 100 microamps. Resistant to electrostatic discharge.
Includes high quality hospital-grade plug and outlets. 700VA power handling capacity supports computers, inter-networking equipment and other
critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as
143 back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes 4 outlets, diagnostic LEDs and built-in
USB & RS-232 communications ports that work with downloadable PowerAlert Software and cabling to provide automatic unattended shutdown of
connected network and PC applications.
Package Includes
SMART 700HG Medical Grade UPS System
One USB and One DB9 monitoring cable
Warranty information
Instruction manual
Features
Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge
suppression in all modes
Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without
using battery power
Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
Supports loads up to 700VA/450 watts
42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load)
4 protected hospital-grade outlets; 6-ft. cord
RS-232 and USB monitoring ports for remote monitoring and unattended shutdown
PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included)
Complete surge protection, line isolation and EMI/RFI noise filtering
5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
Battery replacement door and back panel grounding lug
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
700
Output Watt Capacity
(watts)
450
Output power factor 0.6
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility 60 Hz
Output voltage regulation
(line mode)
-18%, +8%
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
4 5-15R outlet(s)
Output receptacle details Hospital grade output receptacles
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
5.5A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type 5-15P-HG
Input circuit breaker 10A
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical
Service
15A 120V
Input cord length (ft.) 6
Input cord length (m) 1.8
Phase Single-Phase
BATTERY
Full load runtime (minutes) 18 min. (450w)
Half load runtime (minutes) 42 min. (225w)
DC system voltage (VDC) 36
Battery recharge rate
(included batteries)
Less than 4 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC53
Battery Access Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Overvoltage correction Input voltages between 126 and 143 are reduced by 9%
Undervoltage correction Input voltages between 96 and 106 are boosted by 10%
Severe undervoltage
correction
Input voltages between 81 and 95 are boosted by 21%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
480
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
AC suppression joule rating 480
AC suppression response
time
Instantaneous
ISOLATION
Output isolation
transformer
Hospital grade load isolation transformer
Leakage current Equal to 100 microamps
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Installation form factors
supported with optional
accessories
Wallmount (UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / inches)
12.8 x 7.5 x 9
UPS / Power Module
dimensions in primary
form factor (height x width
x depth / cm)
32.4 x 19 x 22.9
UPS / Power Module weight
(lbs)
44.2
UPS / Power Module weight
(kg)
20.1
UPS Shipping dimensions
(height x width x depth /
inches)
18.2 x 11.8 x 13.5
UPS Shipping dimensions
(height x width x depth /
cm)
46.4 x 29.8 x 34.3
Shipping weight (lbs) 49
Shipping weight (kg) 22.2
Cooling method Fan
UPS housing material PVC
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
97.7
Battery mode BTU / hr. (full
load)
189.1
AC mode efficiency rating
(100% load)
94%
COMMUNICATIONS
Communications interface USB; DB9 Serial
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software Included
Communications cable USB and DB9 serial cabling included
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
81
High voltage transfer to
battery power (setpoint)
143
SPECIAL FEATURES
Grounding lug Grounding lug
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to
UL60601-1 (medical grade)
WARRANTY
Product Warranty Period
(Worldwide)
2-year limited warranty
Related Items
Optional Products
Related Model Description Qty.
DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines 1
DNET1 Network Surge Suppressor - Essential protection for data and communication lines 1
DTEL2 Network Surge Suppressor - Essential protection for data and communication lines 1
UPSWM Wallmount Bracket and installation accessories (4 washers, 4 screws, 1 Velcro safety
strap)
1
WEXT3-500-1500 3-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack
models, 1500VA or less
1
WEXT5-500-1500 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack
models, 1500VA or less
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
http://www.tripplite.com/sku/SMART700HG.
Copyright © 2014 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Andere Handbücher für SMART700HG
1
Inhaltsverzeichnis
Andere Tripp Lite UPS Handbücher
Tripp Lite
Tripp Lite OMNIVS1500XL Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro 450 RTI Bedienungsanleitung
Tripp Lite
Tripp Lite SUPDM16 Bedienungsanleitung
Tripp Lite
Tripp Lite OMNIVSX450D Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU8000RT3U1TF Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMX5000XLRT3U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline 2-9USTAND Bedienungsanleitung
Tripp Lite
Tripp Lite ECO-UPS ECO850LCD Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro VS Bedienungsanleitung
Tripp Lite
Tripp Lite Replacement Battery Cartridge Bedienungsanleitung
Tripp Lite
Tripp Lite SMART 2200 NET Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SmartPro Rackmount Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU1500XLCD Bedienungsanleitung
Tripp Lite
Tripp Lite OMNI650LCD Bedienungsanleitung
Tripp Lite
Tripp Lite BC600SINE Bedienungsanleitung
Tripp Lite
Tripp Lite ECO-UPS ECO850LCD Bedienungsanleitung
Tripp Lite
Tripp Lite BC Pro Bedienungsanleitung
Tripp Lite
Tripp Lite TM500 Bedienungsanleitung
Tripp Lite
Tripp Lite OMNI750ISO Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU80K Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
