Tripp Lite SmartPro Rackmount SMX1000RT2U Konfigurationshandbuch
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: SMX1000RT2U
SmartPro 1kVA Line Interactive Sine Wave UPS, SNMPWEBCARD option, 2U Rack/Tower, USB, Serial, EPO,
230V
Highlights
1kVA / 1000VA line interactive 2U rack/tower UPS; Sine wave output
230V nominal output during brownouts to 159 and overvoltages to 282V
USB, RS232, EPO and optional SNMP/Web card interface
Detailed status LEDs; 2 switched output load banks
C14 inlet; 6 C13 outlets; Includes 2 C13 to C14 cables
Description
Tripp Lite's SMX1000RT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage
due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure, with included
accessories for upright tower placement. Maintains regulated 230V nominal output without using battery power during brownouts and overvoltages
from 159 to 282V. 1000VA/700 watt power handling capability and full time sine wave output offers guaranteed compatibility with networking, telecom
and other sensitive electronic applications. Includes a total of 6 outlets with 2 load banks that are individually controllable via software interface to
reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring
of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown
software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO)
interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible
alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects
equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.
Package Includes
UPS System with 4 post rackmount hardware
Two 1.8m IEC320-C13 to C14 load jumper cables
Cabling for USB & DB9 monitoring and EPO switching
PowerAlert unattended shutdown and UPS/Power monitoring software
Warranty information and instruction manual
Features
SMX1000RT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts
and overvoltages, plus network-grade AC surge suppression
1000VA/700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and
other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures, upright tower placement also supported (2 post installation supported with
optional 2POSTRMKITWM accessory)
Large internal batteries offer runtimes of 17 minutes at half load (500VA/350 watts) and 7 minutes at full load (1000VA/700 watts)
Maintains regulated 230V nominal output during brownouts and overvoltages from 159 to 282V
Maintains regulated 230V nominal output during brownouts and overvoltages from 159 to 282V
Includes 6 UPS-supported outlets with 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again
via software interface
C14 inlet accepts user-supplied AC power cord with country specific plug
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification,
event logging and running user-defined script commands.
Offers simultaneous monitoring by up to 2 directly-connected devices through included USB and DB9 interface ports, or the monitoring by
any number of additional servers over IP with included PowerAlert monitoring software.
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage,
DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot
of connected devices
Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard
power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
1000
Output kVA capacity
(kVA)
1
Output Watt Capacity
(watts)
700
Output power factor 0.7
Nominal Output
Voltage(s) Supported
220V; 230V; 240V
Nominal Voltage details 230v nominal inverter output voltage
Frequency compatibility 50 / 60 Hz
Output voltage regulation
(line mode)
-17%, +8%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
6 C13 outlet(s)
Included output power
cables
Includes 2 C13 to C14 output power cables
Built-in controllable
switched load banks
Two switchable two-outlet C13 load banks
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
3.4A
Nominal Input Voltage(s)
Supported
230V AC
UPS input connection
type
C14 inlet
UPS input connection
description
C14 inlet accepts user-supplied AC power cord with country specific plug.
Input circuit breaker 10A
BATTERY
Full load runtime
(minutes)
9 min. (700w)
Half load runtime
(minutes)
21 min. (350w)
DC system voltage (VDC) 24
Battery recharge rate
(included batteries)
4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
See Tripp Lite UPS replacement battery selector
Battery Access Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 159 to 282
Overvoltage correction Input voltages between 245 and 282 are reduced by 12%
Undervoltage correction Input voltages between 159 and 199 are boosted by 14%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form factors
supported with optional
accessories
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary form factor Rackmount
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
3.5 x 17.5 x 13.5
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
8.9 x 44.4 x 34.3
Rack Height 2U
Secondary form factor Tower (requires 2-9USTAND)
UPS / Power Module
weight (lbs)
34
UPS / Power Module
weight (kg)
15.4
UPS Shipping
dimensions (height x
width x depth / inches)
9 x 24 x 20.2
UPS Shipping
dimensions (height x
width x depth / cm)
22.9 x 61 x 51.4
Shipping weight (lbs) 36
Shipping weight (kg) 16.3
Cooling method Fan
UPS housing material Steel
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
73.6
Battery mode BTU / hr.
(full load)
522.4
COMMUNICATIONS
Communications
interface
USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time 2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
159
High voltage transfer to
battery power (setpoint)
282
SPECIAL FEATURES
Grounding lug Back panel grounding lug
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Tested to IRAM
(Argentina); Meets FCC Part 15 Category B (EMI)
WARRANTY
Product Warranty Period
(International)
2-year limited warranty
Product Warranty Period
(Mexico)
2-year limited warranty
Product Warranty Period
(Puerto Rico)
2-year limited warranty
Related Items
Optional Products
Related Model Description Qty.
DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines 1
DNET1 Network Surge Suppressor - Essential protection for data and communication lines 1
DTEL2 Network Surge Suppressor - Essential protection for data and communication lines 1
ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD
or switched PDU.)
1
PDU12IEC Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical
networking equipment
1
SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. 1
U022-010 10-ft. USB2.0 A/B Gold Device Cable
(A Male to B Male)
1
WATCHDOGSW WatchDog Service Monitoring / Reboot Software 1
2-9USTAND Enables Tower Placement of Rackmount UPS Systems 1
2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=2798.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Andere Handbücher für SmartPro Rackmount SMX1000RT2U
1
Inhaltsverzeichnis
Andere Tripp Lite UPS Handbücher
Tripp Lite
Tripp Lite Internet Office 700 Bedienungsanleitung
Tripp Lite
Tripp Lite AGOM5516 Bedienungsanleitung
Tripp Lite
Tripp Lite S3M30KX Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMX2200XLRT2U Bedienungsanleitung
Tripp Lite
Tripp Lite OMNISMART OMNIVS500 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU1500RTXL2UA Bedienungsanleitung
Tripp Lite
Tripp Lite SMART1200LCD Bedienungsanleitung
Tripp Lite
Tripp Lite Smart Pro 450 RT Bedienungsanleitung
Tripp Lite
Tripp Lite Line-Interactive UPS System SMART750USB Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU20K3/3 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SMART2200RMXLN Konfigurationshandbuch
Tripp Lite
Tripp Lite SmartOnline SU1000RTXLCD2U Konfigurationshandbuch
Tripp Lite
Tripp Lite SmartPro SMART700RT1U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SU750RTXLCD2U Bedienungsanleitung
Tripp Lite
Tripp Lite SmartOnline SVX Series Bedienungsanleitung
Tripp Lite
Tripp Lite Smart On line SUINT1000XL Bedienungsanleitung
Tripp Lite
Tripp Lite SUPDM16 Bedienungsanleitung
Tripp Lite
Tripp Lite SmartPro SLT SMX750SLT Bedienungsanleitung
Tripp Lite
Tripp Lite AVR550U Bedienungsanleitung
Tripp Lite
Tripp Lite SMART1524ET Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
