Tristan Auron Superfast Bedienungsanleitung

Tristan Auron ®

Steam Station Iron

Iinstruction Manual

MODEL: Superfast

Read this manual thoroughly before using and save it for future reference

Tristan Auron ®, Electronic Systems Germany,

Christian Seltmann Straße 43, 92637 Weiden, Deutschland

IMPORTANT SAFEGARDS

Before using the electrical appliance, basic precautions should always be followed including

the following:

1. Read all instructions.

2. Before using check that the voltage of wall outlet corresponds to the one shown on the

rating plate.

3. Do not use the appliance if the main cord, plug, light or the appliance itself shows visible

damage, or the appliance has been dropped or is leaking. Take it to the nearest authorized

service facility or a qualified serviceman for examination and repair in order to avoid a

hazard.

4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

5. Do not allow the cord to come into contact with the soleplate when it is hot.

6. Burns may occur from touching hot metal parts, hot water, or steam.

7. Do not let cord hang over edge of table or hot surface.

8. To protect against a risk of electric shock, never immerse the iron in water or other

liquids. If this has happened, do not use this appliance any more; dispose of the

appliance.

9. Do not leave iron unattended while connected into power supply or on an ironing board.

10. Always place or use the appliance on a stable, level and horizontal surface.

11. The use of accessory not recommended by manufacturer may cause injury to persons or

damage to appliance.

12. When placing the iron on its stand, ensure that the surface on which the stand is placed is

stable.

13. The knob at the bottom of unit base must be always well closed during the use.

14. Never fill the water tank with hot water, scent, vinegar, starch, descaler, fabric softener or

other chemical reagent.

15. Unplug from outlet when not in use, before filling water or cleaning.

16. Do not use the appliance for other than its intended use.

17. This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliance in a

way and understand the hazards involved.

18. Children shall not play with the appliance. Cleaning and user maintenance shall not be

made by children without supervision.

19. The iron is not to be used if it has been dropped, if there are visible signs of damage or if

it is leaking.

20. Keep the iron and its cord out of reach of children less than 8 years of age when it is

energized or cooling down.

21. Never touch the hot soleplate unless the iron is cooled down completely and unplugged.

22. Do not use outdoors.

23. Save these instructions.

HOUSEHOLD USE ONLY

KNOW YOUR STEAM STATION

Handle

Temperature dial

Temperature indicator

Soleplate

Filling aperture

Water tank handle

Water tank

Iron

Iron lock

Steam trigger

Thermal insulation stand

Control panel

Power cord storage box

Steam supply hose storage box

Unit base

TEMPERATURE DIAL

Max

（175＜T＜225°C) Cotton

（170＜T＜215°C)

Wool

（115＜T＜160°C)

Silk

（80＜T＜120°C)

CONTROL PANEL

High steam rate indicator

Medium steam rate indicator

Low steam rate indicator

Steam rate control button

Power button

(with power indicator) Descaling button

(with descaling indicator)

Filling aperture

Fill the water tank with water through the filling aperture of water tank. Make sure that the

water shall not exceed the MAX mark of water tank.

Power button

Plug in the appliance and press down the power button, the power indicator will illuminate,

the low steam rate is regarded as defaulted one and its indicator will blink. Hold and press

the power button for more than 2 seconds, the appliance will be cut off.

Steam rate control button

The steam rate can be selected low, medium or high by the steam rate control button. Any

one to be selected, its indicator will blink, and it will illuminate solidly after finish

preheating, which means that the steam is ready for use. The indicator of selected steam rate

will blink when the steam rate is switched from low setting to high setting, while it will

illuminate solidly when the steam rate is switched from high setting to low setting.

Temperature dial

Turn the dial to set ironing temperature based on the garment needs to be ironed.

Temperature indicator

The appliance will heat up when it has not reached the selected temperature. The temperature

indicator will illuminate when the appliance is heating up. Once the appliance has reached

the selected temperature, the temperature indicator will extinguish. The temperature indicator

will be cycled on and off as the iron maintains the selected temperature during ironing.

Iron lock

Put the iron on the thermal insulation stand of unit base, then push the iron lock to “ ”

position to lock the iron on the unit base. To unlock, push the iron lock to “ ” position, then

you can remove the iron to iron the clothes (see Fig.1). The whole steam station can be lifted

up by grasping the iron’ s handle after the iron being properly locked on the unit base (see

Fig.2).

Steam trigger

After pressing down the power button and choosing the desired steam rate, it indicates the

steam can be used for ironing when the steam rate indicator changes from blinking to

illuminating solidly. At that time, press the steam trigger with a little force, the steam will be

sprayed from the soleplate continuously. When loosen the steam trigger, the appliance can

Fig.1

Fig.2

only be used for dry ironing without steam.

Shot of steam

Quickly press the steam trigger twice to produce shot of steam, which will last for 2 seconds

(see Fig.3). If you want to stop producing shot of steam during operation, only need to press

the steam trigger or any button on the control panel once.

Descaling indicator

If the descaling indicator illuminates, it indicates the steam generator shall be cleaned by

virtue of the mineral deposits collecting to a degree. When the system ensures the mineral

deposits have been removed, the indicator will extinguish.

Power cord storage box & Steam supply hose storage box

When not in use, the steam supply hose and power cord can be folded well and stored in

their respective storage boxes (see Fig.4).

Fig.3

Fig.4

Automatic power off

The appliance will turn off automatically if do not activate the “Steam” function or do not

activate the control buttons on the control panel within 10 minutes.

BEFORE FIRST USE

1. Remove any sticker or protective foil from the soleplate.

2. Fill the water tank with water and heat up the iron at the maximum temperature, and then

iron over a piece of damp cloth for several minutes for the purpose of removing any residue

on the soleplate according to the section of “Steam ironing”.

NOTE：

）

It is normal that strange odor comes out from the unit for the first use. This will

cease after a short while.

2） Some particles may come out of the soleplate when you use the iron for the first

time. This is normal; the particles are harmless and stop coming out of the iron after a

short while.

3） When you activate the “Steam” function, the appliance may produce a pumping

sound. This is normal; the sound tells you that water is pumped into the steam

generator.

）

During the heating process of the soleplate, there will be little steam coming out

from the soleplate automatically and this phenomenon will continue for about 3 seconds,

This is normal.

）

There will be little condensation water in the steam supply hose after first use.

But in the second use, the condensation water will be sprayed out together with the

steam at the beginning of releasing steam. This phenomenon will continue for several

seconds. This is normal.

3. The appliance will shut off automatically if all the indicators blink five times together with

five beeps can be heard after being powered on, at that time, please contact the after-sales

service department.

USING YOUR STEAM STATION

The appliance has two ironing ways. You can use dry ironing or steam ironing, the details

refer to the following:

Dry ironing

1. Put the unit base on a stable and level surface and then put the iron on the thermal

insulation stand of unit base.

2. Connect the appliance with power source and press down the power button, the power

indicator turns on.

3. Turn temperature dial to your desired setting, which is depended on the fabric of garment.

The iron starts heating, and the temperature indicator will illuminate solidly during heating.

Refer to “IRONING TIPS” and “ADDITIONAL TABLE” as below when select

temperature.

4. The temperature indicator will turn off when the selected temperature is reached. You can

start ironing now.

WARNING: Never touch hot soleplate at any time before cooling down!

Steam ironing

1. Put the unit base on a stable and level surface.

2. Grasp the water tank’s handle to remove the water tank, then fill it with water through the

filling aperture. You had better use purified water with less calcium particles. After it, replace

the water tank properly. The max capacity of water tank is 1.7L, the water level shall not be

exceeded the MAX mark.

3. Put the iron on the thermal insulation stand of unit base.

4. Connect the appliance with power source, press down the power button, and the defaulted

low steam rate indicator will blink. And there are three modes including low, medium and

high steam rate available, you can select the desired steam rate for each garment according to

your requirement. Make sure that there is enough water in the tank.

5. Turn temperature dial to your desired setting, which is depended on the fabric of garment.

The iron starts heating, and the temperature indicator will illuminate solidly during heating.

Refer to “IRONING TIPS” and “ADDITIONAL TABLE” as below when select

temperature.

6. After a few minutes, the temperature indicator will extinguish, it indicates the soleplate

temperature has achieved the selected temperature. When the indicator of selected steam rate

changes from flashing to illuminating, it indicates that the iron is ready for ironing garment

with steam.

7. Press the steam trigger with a little force, the steam will be sprayed from the soleplate

continuously, and then you can iron the garment with steam.

8. Quickly press the steam trigger twice to produce shot of steam if you need to remove hard

crease.

Note: There may be dripping water during spraying steam when the temperature of the

soleplate is at and lower than the second setting. This is normal.

Caution:

1) Do not touch hot soleplate at any time before cooling down!

2) Never direct the steam at people!

3) Do not activate the steam trigger when the iron is placed on the unit base to avoid

being scalded by steam.

9. After ironing, press down the power button for more than 2 seconds, the appliance will be

turned off and all the indicators will extinguish. Remove the plug from the wall socket. But

the soleplate is still hot, never touch it with hand, place it on the thermal insulation stand

until it cools down completely.

CLEANING AND MAINTENANCE

Before cleaning, firstly disconnect the power outlet and let the appliance cools down.

1. Wipe the residues and any other deposits on the soleplate with a damp cloth or a

non-abrasive (liquid) cleaner.

NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the soleplate.

2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on the unit base

and the thermal insulation stand with dry cloth.

3. Remove the water tank, upend the unit base and put it on a flat surface, then anticlockwise

rotate the knob at the bottom of unit base to remove it (see Fig.5) .

WARNING: To avoid a risk of scald, make sure the appliance has been cooled down

completely before removing the knob.

4. Put the unit base on a suitable container or a special water-collecting pan, then fill the

water tank with water and replace it back in position (see Fig.6). Make sure that the

appliance shall be placed steadily.

5. Connect the appliance with power source, press down the power button, then hold and

press “Descaling button” and “Steam trigger” simultaneously for about 1 second (see Fig.7) ,

at that time, one beep can be heard and the descaling indicator begins to blink, then the

appliance starts to clean the steam generator, and the steam and scale flows out of the steam

generator, about 3 minutes later, three beeps can be heard, the descaling indicator

extinguishes and the appliance shuts off automatically.

NOTE: Do not touch or get close to the container during cleaning to avoid being scalded.

Fig.6

Fig.5

Inhaltsverzeichnis

Sprachen:

Andere Tristan Auron Eisen Handbücher

Tristan Auron

Tristan Auron 8.0 Elite Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Philips

Philips GC6012 Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Philips

Philips HI5914/30 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung