Tritech SeaHub Bedienungsanleitung

Issue 1 TIL – Eng – Spec – 080 SeaHub OM

Supplied By

Please read this manual carefully before setting-up and using your unit

For the latest manual revision always visit “www.tritech.co.uk”

The electronic version of this document is the controlled copy. Therefore all

printed versions of this document are uncontrolled.

F063.1

The copyright in this document is the property of Tritech International

Limited. The document is supplied by Tritech International Limited on

the understanding that it may not be copied, used, or disclosed to

others except as authorised in writing by Tritech International Limited.

Tritech International Limited reserved the right to change, modify and

update designs and specifications as part of their ongoing product

development programme.

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 3 of 70

SeaHub

1. Contents

1. Contents.................................................................................................................................................. 3

2. Notices..................................................................................................................................................... 4

2.1. Trademarks ............................................................................................................................... 4

2.2. Handling of Electrostatic Sensitive Devices.............................................................................. 5

2.3. Warranty Policy ......................................................................................................................... 6

2.4. Statutory Compliances .............................................................................................................. 7

2.4.1. Compliance Notice – CE Mark....................................................................................... 7

2.4.2. Waste Electrical and Electronic Equipment Directive (2002/96/EC - WEEE) ............... 7

2.4.3. Restriction of Hazardous Substances Directive (2002/95/EC – RoHS) ........................ 7

2.5. Safety Statements..................................................................................................................... 8

2.6. Technical Support & Software Upgrades.................................................................................. 9

3. Before Using......................................................................................................................................... 10

3.1. Package Contents................................................................................................................... 10

3.2. General Overview ................................................................................................................... 11

3.3. Front Panel.............................................................................................................................. 13

3.4. Rear Panel .............................................................................................................................. 13

3.5. Underside Label ...................................................................................................................... 13

4. Operation............................................................................................................................................... 14

4.1. Hardware Installation .............................................................................................................. 14

4.2. Hardware Driver Installation and Configuration ...................................................................... 14

4.2.1. Windows Driver Installation.......................................................................................... 14

4.2.2. Identifying SeaHub Serial Ports................................................................................... 17

4.2.3. SeaHub Serial Port Functions ..................................................................................... 19

4.3. Seanet Software Installation and Configuration...................................................................... 20

4.3.1. Seanet Software Installation ........................................................................................ 20

4.3.2. Configuring Seanet with SeaHub COM Ports.............................................................. 21

4.3.3. Selecting SeaHub Port Hardware Modes .................................................................... 22

4.4. Software & Driver Un-installation ............................................................................................ 24

4.4.1. Serial Driver Un-installation ......................................................................................... 24

4.4.2. Seanet Un-installation.................................................................................................. 24

4.5. Status & Mode Indicators ........................................................................................................ 25

4.6. Device Connection, Wiring & Installation ................................................................................ 26

4.6.1. Connecting a Tritech Micron DST Sonar (or Echosounder) ........................................ 26

4.6.2. Connecting a Tritech SeaKing, SeaKing DST, SeaPrinceDST, Bathy, Roll Sensor or

SideScan Sonar ..................................................................................................................... 29

4.6.3. Connecting other Serial Devices ................................................................................. 32

4.6.4. ArcNet Line Termination .............................................................................................. 33

4.6.5. Subsea Sensor Electrical Installation .......................................................................... 33

4.6.6. Ground Fault Monitoring Equipment............................................................................ 33

5. Power Supplies..................................................................................................................................... 34

5.1. Power Inputs ........................................................................................................................... 34

5.2. Choosing a DC Source ........................................................................................................... 35

5.3. Power Outputs ........................................................................................................................ 36

5.3.1. Communication Signal Grounding ............................................................................... 37

5.3.2. “Ports C & D” Power Output ........................................................................................ 37

5.3.3. “DC Output Sockets” Power Output............................................................................. 37

5.3.4. “AIF (ARCNET)” Power Output.................................................................................... 37

5.3.5. Power Output Types .................................................................................................... 38

6. Data Interfaces...................................................................................................................................... 39

6.1. USB PC/Laptop Interface........................................................................................................ 39

6.2. USB Peripheral Ports .............................................................................................................. 39

6.3. Communication (Sonar/Sensor/Serial) Ports .......................................................................... 40

6.3.1. Port A (RS232[5] & RS485) .......................................................................................... 40

6.3.2. Port B (RS232[3], RS485 & RS422) ............................................................................. 41

6.3.3. Port C & Port D (RS232, RS485 & ArcNet) ................................................................. 42

6.4. AIF (ArcNet) Connector........................................................................................................... 43

6.5. RAT Interface .......................................................................................................................... 43

6.5.1. RAT Connection........................................................................................................... 44

6.5.2. RAT Configuration ....................................................................................................... 44

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 4 of 70

SeaHub

7. Hardware Configuration & Maintenance............................................................................................ 45

7.1. Opening the SeaHub housing................................................................................................. 46

7.2. Resetting the Software Default Settings ................................................................................. 47

7.3. Selecting the DC “Power Out” Supply Voltage & Ground....................................................... 48

7.4. Checking & Replacing Fuses .................................................................................................. 51

7.4.1. Checking/replacing the AC “Mains” fuse ..................................................................... 51

7.4.2. Checking/replacing the DC Main Output Power (+28V Supply) Fuse ......................... 52

7.4.3. Checking/replacing the DC Ext Output Power (+12V & +5V Supply) Fuses............... 53

7.5. Making Pin 5 link between Ports C-D for ArcNet Dual Profiler ............................................... 54

7.6. Changing the ArcNet Power Supply ....................................................................................... 55

7.7. Changing the ArcNet Termination Resistor ............................................................................ 56

7.8. Enabling the legacy Serial Port on the AIF connector ............................................................ 57

7.9. Firmware & Software Update Procedure ................................................................................ 59

7.9.1. Updating the SeaHub with the new software BinFile................................................... 59

7.9.2. Updating the SeaHub with new FPGA firmware.......................................................... 60

7.10. Portable Appliance Testing Guidelines ................................................................................. 62

8. Troubleshooting................................................................................................................................... 63

9. Technical Specifications...................................................................................................................... 66

9.1. Electrical.................................................................................................................................. 66

9.2. Software .................................................................................................................................. 68

9.3. Environmental ......................................................................................................................... 69

9.4. Statutory Compliances ............................................................................................................ 69

9.5. Mechanical .............................................................................................................................. 70

2. Notices

2.1. Trademarks

•Microsoft and Windows 98, Windows ME, Windows 2000 and Windows XP are registered

trademarks of the Microsoft Corporation

•IBM and AT are registered trademarks of International Business Computers.

•AMD is a registered trademark of Advanced Micro Devices.

•Intel and Pentium is a trademark of the Intel Corporation

Tritech International Limited reserved the right to change, modify and update designs and specifications

as part of their ongoing product development programme.

Whilst every effort is taken to keep all the information contained in this document up to date, information

in this document is subject to change without notice and does not represent a commitment on the part of

Tritech International or System Technologies.

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 5 of 70

SeaHub

2.2. Handling of Electrostatic Sensitive Devices

ATTENTION

Observe Precautions For Handling

Electrostatic Sensitive Devices

Caution: Certain semiconductor devices used in the equipment are liable to damage due to

static voltages.

Observe the following precautions when handling these devices in their unterminated state, or sub-

units containing these devices:

•Persons removing sub-units from any equipment using electrostatic sensitive devices must be

earthed by a wrist strap via a 1MΩresistor to a suitable discharge reference point within the

equipment.

•Soldering irons used during any repairs must be low voltage types with earthed tips and

isolated from the Mains voltage by a double insulated transformer. Care should be taken

soldering any point that may have a charge stored.

•Outer clothing worn must be unable to generate static charges.

•Printed Circuit Boards (PCBs) fitted with electrostatic sensitive devices must be stored and

transported in appropriate anti-static bags/containers.

F110.1

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 6 of 70

SeaHub

2.3. Warranty Policy

Tritech International Limited herein after referred to as TIL

TIL warrants that at the time of shipment all products shall be free from defects in material and workmanship and suitable

for the purpose specified in the product literature.

The unit/system warranty commences immediately from the date of customer acceptance and runs for a period of 365

days. Customer acceptance will always be deemed to have occurred within 72 hours of delivery.

Note: Any customer acceptance testing (if applicable) must be performed at either TIL premises or at one of their

approved distributors unless mutually agreed in writing prior to despatch.

Conditions:

These include, but are not limited to, the following:

1 The warranty is only deemed to be valid if the equipment was sold through TIL or one of its approved distributors.

2 The equipment must have been installed and commissioned in strict accordance with approved technical

standards and specifications and for the purpose that the system was designed.

3 The warranty is not transferable, except or as applies to Purchaser first then to client.

4 TIL must be notified immediately (in writing) of any suspected defect and if advised by TIL, the equipment subject

to the defect shall be returned by the customer to TIL, via a suitable mode of transportation and shall be freight

paid.

5 The warranty does not apply to defects that have been caused by failure to follow the recommended installation or

maintenance procedures. Or defects resulting from normal wear & tear, incorrect operation, fire, water ingress,

lightning damage or fluctuations in vehicles supply voltages, or from any other circumstances that may arise after

delivery that is out with the control of TIL.

(Note: The warranty does not apply in the event where a defect has been caused by isolation incompatibilities.)

6 The warranty does not cover the transportation of personnel and per diem allowances relating to any repair or

replacement.

7 The warranty does not cover any direct, indirect, punitive, special consequential damages or any damages

whatsoever arising out of or connected with misuse of this product.

8 Any equipment or parts returned under warranty provisions will be returned to the customer freight prepaid by TIL

9 The warranty shall become invalid if the customer attempts to repair or modify the equipment without appropriate

written authority being first received from TIL.

10 TIL retains the sole right to accept or reject any warranty claim.

11 Each product is carefully examined and checked before it is shipped. It should therefore be visually and

operationally checked as soon as it is received. If it is damaged in anyway, a claim should be filed with the courier

and TIL notified of the damage.

Note: TIL reserve the right to change specifications at any time without notice and without any obligation to

incorporate new features in instruments previously sold.

Note: If the instrument is not covered by warranty, or if it is determined that the fault is caused by misuse, repair

will be billed to the customer, and an estimate submitted for customer approval before the commencement of

repairs.

F167.1

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 7 of 70

SeaHub

2.4. Statutory Compliances

2.4.1. Compliance Notice – CE Mark

Declaration of Conformity (DoC)

“Hereby, Tritech International Limited declares that this product is in compliance with the

essential requirements and other relevant provisions of the Directive 1999/5/EC.”

This notice is based upon compliance of the product to the following directives and standards

•73/23/EEC Low Voltage Directive with amendment 93/68/EEC

•89/336/EEC EMC Directive with amendments 92/31/EEC and 93/68/EEC

2.4.2. Waste Electrical and Electronic Equipment Directive (2002/96/EC - WEEE)

Tritech International Limited is very aware of its responsibilities to the environment and to the

sustainability of the resources of our planet. The European Commission has issued the above Directive in

an effort to reduce the impact on the environment due to electronic appliances being committed to landfill

after they have come to the end of their useful life.

When the appliance referred to in this manual is no longer serviceable, it MUST NOT be discarded by

placing in landfill, dumping in the sea or incineration. SEPARATE collection is mandatory.

The owner of the appliance should either return it and its associated leads & accessories, if appropriate,

to Tritech International Limited with a certificate of decontamination (we reserve the right to protect our

staff from the effects of any contamination) or sent to an appropriate treatment or recycling agency.

Any goods manufactured after 08/2005 that fall within the scope of the WEEE Directive are

marked as shown opposite and will have the date of manufacture and the manufacturer’s

identification marks.

2.4.3. Restriction of Hazardous Substances Directive (2002/95/EC – RoHS)

This product is built using lead free (RoHS directive compliant) components and assembly processes.

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 8 of 70

SeaHub

2.5. Safety Statements

NOTE

Throughout the manual certain potential problems, or further information relating to

the installation, maintenance, understanding or use of the apparatus will be

highlighted to the operator by indications identified by the adjacent symbol and text.

CAUTION!

Throughout the manual certain safety or operational related comments and

requirements will be highlighted to the operator by indications identified by the

adjacent symbol and text.

DANGER!

Throughout the manual certain safety or operational related comments and

requirements that could lead to injury or loss of life will be highlighted by the

adjacent symbol and text.

Before proceeding please read all of the following safety points…

DANGER!

Power Supply & Power Lead

•Disconnect the unit from a mains or DC power source before attempting

installation or maintenance on the unit. Do not open the unit with a power supply

connected.

•Do not overload a mains supply outlet, extension cord or adapter as this may

result in electric fire or shock.

•Do not modify the power cord or plug.

•Do not bend or twist the power cord.

•Do not place the power cord near any heat sources that may melt the protective

insulation.

•Do not use a damaged or defective power cord.

•Do not use (and unplug) the unit in situations where a power-line surge may occur

(such as a lightning storm), or if the unit is not used for a prolonged period of time.

DANGER!

Liquids

•The unit is NOT protected against the ingress of water, so take care to avoid

exposing the unit to sources of conductive liquids.

•Do not touch the unit with wet hands

DANGER!

Maintenance & Cleaning

•Disconnect the product from the power supply before attempting any maintenance

or cleaning.

•Do not clean with solvents, and only use a light damp cloth on the exterior of the

unit.

•Do not undertake maintenance of the unit, outside the scope of that defined within

this manual, unless instructed to do so by Tritech International Ltd technical

support.

•Do not insert extraneous object (metal or other alien substance) into the unit or

any of its connector apertures.

DANGER!

Location & Ventilation

•Do not place near a source of heat that may cause the operational temperature

parameters to be exceeded, or stacking other heat generating equipment onto of

the unit.

•Do not block any openings on the unit

•Always use the unit on a stable, rigid, flat and lint-free surface.

•Make sure the unit is more than 10cm away from any other appliance that may be

susceptible to electromagnetic interference.

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 9 of 70

SeaHub

2.6. Technical Support & Software Upgrades

Contact your local agent or Tritech International Ltd

Mail

Tritech International Ltd.

Peregrine Road,

Westhill Business Park,

Westhill, Aberdeen,

AB32 6JL, UK

Telephone ++44 (0)1224 744111

Fax ++44 (0)1224 741771

Email [email protected]

Web www.tritech.co.uk

An out-of-hours emergency number is available by

ringing the above telephone number

Troubleshooting remedies are included in section 8 (page 63) of this manual. If these do not help, or you

have other cause to use our Technical Support service, please ensure that you have the following details

at hand prior to calling:

•Serial Numbers of the unit any Tritech International Ltd equipment connected directly or indirectly

to it.

•Software/Firmware Revision Numbers

•Fault Description

•Any remedial action implemented

Due to the expansion of equipment capabilities and the fact that new sub-modules are continually being

introduced, this manual cannot detail every aspect of the operation.

The name of the organisation which purchased this system is held on record at Tritech International Ltd.

Details of new software and hardware packages will be announced at regular intervals. Depending on the

module, free upgrades will be offered in keeping with our policy of maintaining the highest levels of

customer support.

Tritech International Ltd can only undertake to provide software support for systems loaded with

Operating System and Tritech Seanet software in accordance with the instructions given in this manual. It

is the customers responsibility to ensure the compatibility of any other package that they may choose to

load unless with the prior consent of Tritech.

Operator Manual

Issue 1 TIL – Eng – Spec – 080 Page 10 of 70

SeaHub

3. Before Using

Read the following sections carefully to learn what parts are included, gain an understanding of the

product, its configurations and setup & installation procedures.

3.1. Package Contents

Upon delivery your SeaHub package contains the following items…

•A “SeaHub Surface Interface” module

•A mains power cord

•A 3m USB2 (Type-A to Type-B) cable

•Quick-start installation and setup guide

•Manuals

•Software & Driver CD – containing…

Seanet Pro software

SeaHub drivers

Electronic Manuals (PDF format) and Acrobat PDF reader

•Transit Case

•Connection Kit - comprising…

2 ×9-Way Female D-Type connectors (solder bucket) and shells

2 ×6-Way DIN plugs (solder bucket) and shells

1 ×15-Way Male D-Type connector (solder bucket) and shell

3 ×4mm “Banana Style” plugs (red, black and green)

1 ×Yellow Waterblock Adapter with 39Ωinternal termination resistor

Andere Handbücher für SeaHub

Inhaltsverzeichnis

Andere Tritech Aufnahmegeräte Handbücher

Tritech

Tritech SeaHub Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch