Triton TDM 100 Bedienungsanleitung
TDM 100 Packaging Instrucons
TDN 07103-00253 February 16, 2015
Corporate Headquarters:
21405 B Street
Long Beach, MS 39560
Phone: (228) 575-3100
Fax: (228) 575-3101
COPYRIGHT NOTICE
© 2015 Triton. All Rights Reserved. TRITON logo is a registered trademark of
Triton Systems of Delaware, LLC
TDM 100 PACKAGING INSTRUCTIONS
2
Introducon
This document describes how to package a TDM 100 Dispenser.
Tools Required
Packaging tape
Bubble wrap
KIT P/N:
06300-01100 TDM 100 Packaging Kit
PARTS SUPPLIED IN KIT
Descripon Quanty
Carton|TDM C and D|18 inches X 18 inches X 15 inches 1
Cassee Carton: 16 inches X 12 inches X 8 inches 1
Foam|Foam for TRI-E & D 1
Pad w/Foam|TDM Top Pad w/Foam (plain) 1
Insert, Foam Block 1
Foam Block
Top Pad w/Foam
Dispenser Carton
(18inX18inX15in)
Boom Foam
Cassee Carton
(16in X 12in X 8in)
TDM 100 PACKAGING INSTRUCTIONS
3
1. Assemble both the dispenser carton and
the cassee carton by folding the small
aps in and the long aps over them
with the part numbers facing out. Seal
with tape. (Figure 1)
Figure 1
2. Remove the cassee and reject bin from
the dispenser. (Figure 2)
If the keys are being shipped, remove them
and tape to the to the top of the cassee.
Do the same for the reject bin.
Figure 3
Figure 2
3. Wrap both cassee and reject bin in
bubble wrap. (Figure 3)
Cassee
Reject
TDM 100 PACKAGING INSTRUCTIONS
4
Figure 4
4. Line the cassee carton with bubble wrap.
Place the cassee and reject bin inside. (Figure
4) Fill in extra space with bubble wrap.
5. Close the carton and seal with tape. (Figure
5)
Figure 5
6. Place the boom foam in the dispenser
carton with the small notch in the back right
corner. (Figure 6)
Figure 6
TDM 100 PACKAGING INSTRUCTIONS
5
Foam block
Figure 8
8. Insert the foam block in front of the
dispenser. (Figure 8)
7. Place the dispenser into the foam boom
with the belt cover ng into the small notch.
(Figure 7)
Belt cover
Figure 7
Figure 9
Motor
9. Set the top foam in the dispenser carton so
the motor ts into the small notch. The motor
will be at the top right side of the dispenser.
(Figure 9)
TDM 100 PACKAGING INSTRUCTIONS
6
Figure 10
10. Lower the top foam down so it ts snug
around the top of the dispenser. (Figure 10)
11. Close the dispenser carton and seal with
tape. (Figure 11)
Figure 11
11. Close the dispenser carton and seal with
tape. (Figure 12)
Figure 12
Inhaltsverzeichnis
Andere Triton Spender Handbücher
