
8 9
Setup
Charging SPECTRE
Controller Baery Installaon
Connect the USB Charging Cable to an USB port and baery. The LED on
the USB Charging Cable lights red indicang that the baery of the drone is
charging. When the baery is fully charged, the LED on the USB Charging
Cable turns o. It takes about 30 minutes to recharge a discharged baery.
Make sure you only charge the rechargeable baery with the supplied
USB Charging Cable. Trying to charge the rechargeable baery with a
dierent baery charger might cause serious damage.
WARNING
1Open the Controller baery cover.
2 Install 4x 1.5V AA baeries.
3 Slide the Controller baery cover back.
Rotor Protector Installaon
Gently slide the Rotor Protectors onto the
landing feet of the drone (4x).
Place your mobile phone in the holder
by opening the clip and placing the
phone in the holder. Now gently close
the clip. The mobile phone is protected
by two foam cushions inside the clip.
Mobile Phone Installaon
1
3
2