Svenska OH-Gruppen Ltd filial
www.trolleborg.se [9]
both buttons, and both Bluetooth Helmet Intercom headsets are in pairing state then.
While the Blue LED and the Red LED flashing alternately (Pairing state), short press either of
control buttons .
The pressed Bluetooth Helmet Intercom headset will search another in pairing state one and try
to pair with it.
Once paired success, both Bluetooth Helmet Intercom headsets indicators will exit the Blue/Red
flashing state simultaneously, and shift to only Blue LED flashing state same time.
PS: Bluetooth headset turn to intercom state automatically after the first pairing
succeed.
Pairing between D6 Bluetooth headset and Mobile.
Place the D6 Bluetooth Helmet Intercom headset and the mobile phone in a visible area within
1 meter range.
Make sure the Bluetooth Helmet Intercom headset is in power off state.
Press and hold Control Button for about 8 seconds, release until hear a “dudu” tone, and the
Blue LED and the Red LED flashing alternately, then the Bluetooth Helmet Intercom headset is in
pairing state now.
Follow the user manual of your mobile phone, turn on the Bluetooth function, and searching the
Bluetooth headset devices.
From the found devices in your mobile phone, select the device named “D6”, and then connect
to pair with it, when it prompts to enter password, enter password <0000>. Once paired successful,
LED Indicator will change from Blue/Red alternately to Blue flashing, and with a “di” tone to note
that the Bluetooth Helmet Intercom headset has connected with your mobile phone. Now you can
use the headset to answer you phone call, or enjoy the music from your mobile phone.
PS: Pairing password may not necessary for some mobile.
Function Operations
Answer incoming call
When there is an incoming phone call, short press MFB to manual answer the call.
Automatically answer incoming call
After prompt ring played (about 8 seconds), and still no operations from the headset, the headset
will connect the call automatically.
Reject incoming phone call
Quick double press MFB to reject a incoming phone call.
Hang up call④
④④
④
In call active state, short press MFB can hang up the call.
⑤
⑤⑤
⑤Audio transfer
In call active state, press and hold the MFB button for 3 seconds, after an “du”tone, the call audio
will transfer from headset to mobile phone.
Phone call
