Trotec BZ07 Bedienungsanleitung

TRT-BA-BZ07-TC2019-29-001-EN

BZ07

OPERATING MANUAL

CLIMATE MONITORING

STATION

2 EN

climate monitoring station BZ07

Table of contents

Notes regarding the operating manual.................................2

Safety .....................................................................................2

Information about the device................................................3

Transport and storage...........................................................5

Operation ...............................................................................5

Maintenance and repair ........................................................8

Disposal .................................................................................8

Notes regarding the operating manual

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of

persons due to electrical voltage.

Warning

This signal word indicates a hazard with an average

risk level which, if not avoided, can result in serious

injury or death.

Caution

This signal word indicates a hazard with a low risk

level which, if not avoided, can result in minor or

moderate injury.

Note

This signal word indicates important information

(e.g. material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry

out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the

operating manual must be observed.

You can download the current version of the operating manual

and the EU declaration of conformity via the following link:

BZ07

https://hub.trotec.com/?id=43555

Safety

Read this manual carefully before starting or using the

device. Always store the manual in the immediate vicinity

of the device or its site of use!

Warning

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may

result in electric shock, fire and/ or serious injury.

Save all warnings and instructions for future

reference.

This appliance can be used by children aged from

8years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and

user maintenance shall not be made by children

without supervision.

• Do not use the device in potentially explosive rooms.

• Do not use the device in aggressive atmosphere.

• Do not immerse the device in water. Do not allow liquids to

penetrate into the device.

• The device may only be used in dry surroundings and must

not be used in the rain or at a relative humidity exceeding

the operating conditions.

• Protect the device from permanent direct sunlight.

• Do not remove any safety signs, stickers or labels from the

device. Keep all safety signs, stickers and labels in legible

condition.

• Do not open the device.

• Observe the storage and operating conditions as given in

the Technical data chapter.

EN 3

climate monitoring station BZ07

Intended use

Only use the device to measure the indoor air temperature and

humidity. Observe and comply with the technical data.

To use the device for its intended use, only use accessories and

spare parts which have been approved by Trotec.

Improper use

Do not use the device out of doors.

Do not use the device in potentially explosive areas.

Any unauthorised changes, modifications or alterations to the

device are forbidden.

Personnel qualifications

People who use this device must:

• have read and understood the operating manual, especially

the Safety chapter.

Residual risks

Warning of electrical voltage

Work on the electrical components must only be

carried out by an authorised specialist company!

Warning

Risk of suffocation!

Do not leave the packaging lying around. Children may

use it as a dangerous toy.

Warning

The device is not a toy and does not belong in the

hands of children.

Warning

Dangers can occur at the device when it is used by

untrained people in an unprofessional or improper way!

Observe the personnel qualifications!

Caution

Keep a sufficient distance from heat sources.

Note

To prevent damages to the device, do not expose it to

extreme temperatures, extreme humidity or moisture.

Note

Do not use abrasive cleaners or solvents to clean the

device.

Information about the device

Device description

The climate monitoring station is a battery-powered measuring

device indicating the current indoor climate.

It comes with the following functional properties and equipment

features:

• Simultaneous indication of room temperature, weather

forecast, feel-good indication, temperature profile of the

previous 12hours, humidity level and time or date

• Alarm with snooze function

• Indication of recorded minimum and maximum values for

temperature and relative humidity

• Switching option between °C and °F

• Integrated stand for table installation, integrated holder for

wall mounting

4 EN

climate monitoring station BZ07

Device depiction

812

No. Designation

1 °C/ °F indication

2 Weather forecast (plus battery indication)

3 Feel-good indication

4 Temperature profile

5 Indication of time/ date and weekday

6 Relative humidity indication

7 Opening with RESETbutton

8MODEbutton

9UPbutton

10 DOWNbutton

11 MEMbutton

12 SNOOZEbutton

13 Stand

14 Wall holder

15 Battery compartment

Technical data

Parameter Value

Model BZ07

Article number 3510205017

Weight

(incl. batteries)

approx. 170g

Dimensions

(lengthx widthx

height)

approx. 150mmx 105mmx 23mm

Display 5" LCD (monochrome)

Power supply 2batteries of typeAAA, 1.5V

Relative humidity

Measuring range 20%RH to 99%RH

Accuracy 20% to 34%RH: ±10%RH

35% to 75%RH: ±8%RH

76% to 95%RH: ±10%RH

Resolution 1%

Air temperature

Measuring range 0°C to 50 °C or 32°F to 122 °F

Accuracy ±2°C or ±3.6 °F

Measuring range

resolution

0.1°C/°F

Ambient conditions

Operation 0°C to 50°C or 32°F to 122°F

and 90%RH (non-condensing)

Storage 0°C to 50°C or 32°F to 122°F

and 90%RH (non-condensing)

Scope of delivery

• 1x Device BZ07

• 2x 1.5V battery AAA

• 1 x Quick guide

EN 5

climate monitoring station BZ07

Transport and storage

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Transport

When transporting the device, ensure dry conditions and and

protect the device from external influences e.g. by using a

suitable bag.

Storage

When the device is not being used, observe the following

storage conditions:

• dry and protected from frost and heat

• protected from dust and direct sunlight

• The storage temperature is the same as the range given in

the Technical data chapter.

• Remove the batteries from the device.

Operation

Inserting the batteries

Prior to first use, insert two batteries (typeAAA, 1,5V) into the

device. To do so, please proceed as follows:

1. Open the battery compartment(15) at the rear of the

device.

2. Insert the batteries with correct polarity(+/-).

3. Close the battery compartment(15).

ðThe display will be activated and an acoustic signal is

emitted.

Switching between the indication of time, date and alarm

time

By pressing the MODEbutton(8) you can switch the

indication(5) from the time(time mode,16) to the date(date

mode,17) and then to the alarm time(alarm mode,18) by

pressing the MODEbutton(8) once more.

16 18

No. Designation

16 Time mode

17 Date mode

18 Alarm mode

6 EN

climate monitoring station BZ07

Setting the time format

For the indication of the time you can optionally switch between

a 12-hour and a 24-hour format. In case of the 12-hour format,

PM will be displayed beside the time indication(5) in the

afternoon. Proceed as follows to change the time format:

1. Press and hold the UPbutton(9) for approx. 2seconds.

ðThe time will be displayed in the respectively other

format.

Info

If– in case of the following settings– no button is

pressed for more than 8seconds, the system

automatically exits the setting mode and returns to the

indication of the time.

Setting the time

Please proceed as follows to set the time:

üYou have selected the time mode(16).

1. Press and hold the MODEbutton(8) for approx. 4seconds.

ðThe hour display starts flashing.

2. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the hourdisplay correctly. Keep the button pressed to

adjust the value at a faster pace.

3. Once the hourdisplay has been set correctly, press the

MODEbutton(8) once more to switch to the minute

display.

ðThe minute display starts flashing.

4. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the minute display correctly. Keep the button pressed to

adjust the value at a faster pace.

5. Once the minute display has been set correctly, press the

MODEbutton(8) once more to exit the mode.

Setting the date and weekday

Please proceed as follows to set the date and the weekday:

1. Switch over into the date mode(17) by pressing the

MODEbutton(8).

2. Press and hold the MODEbutton(8) again for approx.

4seconds.

ðThe date indication now turns into a flashing indication

of the year.

3. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the year display correctly. Keep the button pressed to

adjust the value at a faster pace.

4. When the year has been set correctly, press the

MODEbutton(8) once more to switch to the month display.

ðThe month display(M) starts flashing.

5. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the month display correctly. Keep the button pressed to

adjust the value at a faster pace.

6. Once the month display has been set correctly, press the

MODEbutton(8) once more to switch to the day display.

ðThe day display(D) starts flashing.

7. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the day display correctly. Keep the button pressed to

adjust the value at a faster pace.

ðThe weekday will automatically be set to the correct

day.

8. Once the day display has been set correctly, press the

MODEbutton(8) once more to exit the mode.

ðThe set date will be indicated on the display for approx.

8seconds, then it switches back to indicate the time.

Setting the alarm time

Please proceed as follows to set the alarm time:

1. Switch over into the alarm mode(18) by pressing the

MODEbutton(8).

ðThe alarm time and the alarm icon will be displayed.

2. Press and hold the MODEbutton(8) again for approx.

4seconds.

ðThe hourdisplay and the alarm icon start flashing.

3. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the hourdisplay correctly. Keep the button pressed to

adjust the value at a faster pace.

4. Once the hourdisplay has been set correctly, press the

MODEbutton(8) once more to switch to the minute

display.

ðThe minutedisplay and the alarm icon start flashing.

5. Use the UPbutton(9) or the DOWNbutton(10) to adjust

the minute display correctly. Keep the button pressed to

adjust the value at a faster pace.

6. Once the minute display has been set correctly, press the

MODEbutton(8) once more to exit the mode.

ðThe set alarm time will be indicated on the display for

approx. 8seconds, then it switches back to indicate the

time.

EN 7

climate monitoring station BZ07

De-/activating the alarm function

1. Whilst the time is displayed, briefly press the UPbutton(9).

ðThe alarm icon will be permanently indicated on the

display in between hours and minutes. The alarm

function is activated.

2. Press the UPbutton(9) again to deactivate the alarm

function.

ðThe alarm icon will no longer be displayed and the

alarm function is deactivated.

Turning off the alarm

When the acoustic alarm signal is emitted, you can turn it off by

pressing any of the buttons (other than SNOOZE(12)).

Note:

The alarm will stop automatically after 2minutes if no button is

pressed.

Snooze function

The device comes equipped with a snooze function enabling you

to turn the alarm off for the time being. The acoustic alarm

signal will be emitted once more after approx. 8minutes:

1. Press the SNOOZE button(12) when you hear the alarm.

ðThe alarm will stop and the alarm icon starts flashing.

2. After approx. 8minutes, when the acoustic alarm signal is

emitted once more, you can use the snooze function again

by pressing SNOOZE(12).

3. To deactivate the active snooze function, simply press any

other button than SNOOZE(12).

ðThe alarm icon will stop flashing and the snooze

function is deactivated.

Weather forecast

The device has an indication for the weather forecast(2)

displayed by 4symbols:

• sunny(19)

• partly cloudy(20)

• overcast(21)

• rain(22)

FORECAST

21 22

Info

The device is not fitted with a sensor for atmospheric

pressure. The weather forecast is based on the

changing relative humidity level. If the relative humidity

level changes by more than ±5% within one hour, the

indication will be adjusted accordingly. The symbol for

sunny weather(19) is displayed at a relative humidity

below 40%. If the humidity exceeds 80%, the

forecast will indicate the symbol for rainy weather(22).

Feel-good indication

The device comes with a feel-good indication(3) displayed by

3symbols:

• dry

• agreeable

• humid

The classification into the three categories is based on a

combination of temperature and relative humidity. The following

criteria shall be applied:

1. The symbol(dry) will be displayed at a relative humidity

level of less than 40%– regardless of the temperature.

2. If the relative humidity ranges between 40 and 70% and

the temperature between 20 and 25°C, the symbol

(agreeable) will be displayed.

3. The symbol(humid) will be displayed at a relative

humidity level of more than 70%– regardless of the

temperature.

4. If the relative humidity ranges between 40 and 70%, but

the temperature is not between 20 and 25°C, nosymbol

will be displayed.

Temperature profile

The device constantly indicates the temperature change over

the past 12hours(4) within a range of max. ±3°C.

One bar indicates an alteration by1°C or 1.8°F.

Indication of minimum and maximum values

The device saves the minimum and maximum values for

temperature and relative humidity. These values can be

displayed by pressing the MEMbutton(11):

1. Briefly press the MEMbutton(11) once to display the

maximum values.

ðThe maximum values will be displayed along with the

MAXsymbol.

2. Press the MEMbutton(11) again to display the minimum

values.

ðThe minimum values will be displayed along with the

MINsymbol.

3. Press the MEMbutton(11) once more to exit the mode.

8 EN

climate monitoring station BZ07

Switching the temperature indication between °C and °F

Briefly press the DOWNbutton(10) to switch the indicated

temperature unit from degrees Celsius to degrees Fahrenheit or

vice versa.

Resetting the system

You can reset the system to its initial configuration. To do so,

use a pointed object to press the RESETbutton(7) in the

opening.

Maintenance and repair

Battery change

A battery change is required when the battery icon is displayed

in the weather forecast indication(2) or the display itself is no

longer or only partly visible. See chapter Operation.

Cleaning

Clean the device with a soft, damp and lint-free cloth. Make

sure that no moisture enters the housing. Do not use any

sprays, solvents, alcohol-based cleaning agents or abrasive

cleaners, but only clean water to moisten the cloth.

Repair

Do not modify the device or install any spare parts. For repairs

or device testing, contact the manufacturer.

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment

must not be disposed of with the household waste at the end of

its life. You will find collection points for free return of waste

electrical and electronic equipment in your vicinity. The

addresses can be obtained from your municipality or local

administration. For further return options provided by us please

refer to our website www.trotec24.com.

The separate collection of waste electrical and electronic

equipment aims to enable the re-use, recycling and other forms

of recovery of waste equipment as well as to prevent negative

effects for the environment and human health caused by the

disposal of hazardous substances potentially contained in the

equipment.

In the European Union, batteries and accumulators must not be

treated as domestic waste, but must be disposed of

professionally in accordance with Directive 2006/66/EC of the

European Parliament and of the Council of 6September 2006

on batteries and accumulators. Please dispose of batteries and

accumulators according to the relevant legal requirements.

Trotec GmbH & Co. KG

Grebbener Str. 7

D-52525 Heinsberg

+49 2452 962-400

+49 2452 962-200

[email protected]

www.trotec.com

Andere Handbücher für BZ07

Inhaltsverzeichnis

Andere Trotec Temperaturregler Handbücher

Trotec

Trotec BZ06 Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

Future Design

Future Design FDC-9200 Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

Omron

Omron E5EX-H Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema