Truma Aventa compact plus AU Bedienungsanleitung

Installation instructions

Aventa compact plus AU

Contents

Symbols used ........................................................................ 2

Technical data ..................................................................... 2

Installation instructions

Scope of delivery ................................................................ 3

Accessories for installation (optional) .............................. 3

Intended use ....................................................................... 4

Installation dimensions (in mm) ............................................ 4

Clearance around the air conditioning system ...................... 4

Air inlets / outlets ................................................................... 4

Condensation traps ............................................................... 4

Selecting a location ........................................................... 5

Cut-out installation 400 x 400 .......................................... 5

Installation with new cut-out ........................................... 5

Preparation for power cable connection and control

panelcable ............................................................................ 6

Securing the appliance .......................................................... 6

Use of roof thickness adapters .............................................. 7

Insert the filter into the air distributor ................................... 7

Insert the panels into the air distributor small ....................... 8

230 V electrical connection ............................................... 8

Function check / remote control mounting ........................... 8

Aventa compact plus AU

Symbols used

The device must only be installed and repaired by an

expert.

Symbol indicates a possible hazard.

Note containing information and tips.

Technical data

Determined on the basis of EN 14511 or Truma test conditions

Power supply

230 V – 240 V , 50 Hz

Power consumption

Cooling: 4.4 A

Starting current

28 A (150 ms)

Cooling power

2.2 kW (T35 /T35)

Air volume flow

max. 400 m³/h

Usage limits

+16 °C to 40 °C

Maximum angle during operation

8 %

Weight

29.5 kg with installation materials

Dimensions (W x H x D)

External:560 x 265 x 785 mm

Internal: 523 x 46 x 670 mm (air distributor)

Internal: 496 x 46 x 556 mm (air distributor small)

Refrigerant

R 407C / 0.47 kg

Contains fluorinated greenhouse gases covered by the Kyoto

Protocol. Hermetically sealed.

Global Warming Potential (GWP)

1774

CO2 equivalent

833.8 kg

Subject to technical changes.

Only competent and trained staff (experts) are permitted

to install and repair the Truma product and to carry out the

function test, at the same time observing the installation

and operating instructions and the currently recognised

technical regulations. Experts are persons who, based on

their specialist instruction and training, their knowledge and

experience with Truma products and the relevant standards,

can carry out the necessary work properly and identify

potential hazards.

Scope of delivery

External unit:

– 1 Aventa compact plus AU

– 2 brackets

– 4 screws M6 x 70 coated with screw sealant

– 6 screws M6 x 12 coated with screw sealant

– 1 base ring

– 2 roof thickness adapters (each 10 mm)

– 1 remote control with mounting

– 2 screws 2.9 x 16 for mounting

– 2 AAA batteries

– 1 set of operating and installation instructions

– 1 installation template

– 3 Wago clamps

– 1 control panel cable

Air distributor (to be ordered separately):

– 1 air distributor, fully assembled or

– 1 air distributor small, fully assembled

Accessories for installation (optional)

Roof thickness adapter 10 mm, 1 piece (part no. 40091-16900)

Fig. 1

Aventa sealing frame (part no. 40091-19500)

Recommended for optimum sealing when retrofitting in

vehicles with 400 x 400 mm cut-out.

Fig. 2

Levelling frame installation kit for van

Fig. 3 a

PSA adapter frame kit for van

Fig. 3 b

Covering tape

cream (part no. 40091-31200)

grey (part no. 40091-31300)

For compensating for a gap of up to 5 mm between air

distributor and roof.

l ~ 2,36 m

Fig. 4

Adapter 12 V for lighting the air distributor

not for air distributor small

1 piece (part no. 40091-33000).

Fig. 5

Installation instructions

Intended use

This appliance has been designed for installation in motor

homes and caravans and is intended for private use.

Installation dimensions (in mm)

670

556*

785

265

25 - 110

Fig. 6

400

(380)

400

(350)

523 / 496*

192

(212)

310

560

Fig. 7

*air distributor small

Clearance around the air conditioning system

The clearance around the external unit must be 20 mm at

the front and 50 mm at the side. At least 20 mm of clearance

must be left at the rear. Truma recommends clearance of

50 mm so that the exhaust air can blow out freely.

560

50 50

785

Fig. 8

The clearance around the air distributor must allow the air

to blow out without obstructions. The side clearance must be

at least 40 mm (not in the case of the air distributor small).

The pivoting range of flaps and doors must be taken into

consideration.

400

670

380

523

400

350

FRONT

Fig. 9 – Air distributor

400

556

380

496

400

350

FRONT

Fig. 10 – air distributor small

Air inlets / outlets

Fig. 11

Condensation traps

The condensation is led away via the roof of the vehicle.

Fig. 12

Subject to technical changes.

Selecting a location

Once the roof-mounted air conditioning system has

been installed, any nearby exhaust cowl must extend

at least 10 cm above the air conditioning system. The exhaust

cowl must be extended if necessary (pay attention to the

heater manufacturer’s specifications).

The roof of the vehicle (roof thicknesses of 25 to 110 mm)

must be level and smooth.

Three installation options are available:

– The cut-out must be a new cut-out (350 x 380 mm)

– Cut-out of an existing roof hatch (400 x 400 mm) without a

sealing frame (accessory).

– Cut-out of an existing roof hatch (400 x 400 mm) with a

sealing frame (accessory). The installation instructions are

included with the sealing frame.

Attention must always be paid to the following points:

– The appliance should be installed as close as possible to the

centre of the vehicle.

– Check that no obstructions are present that will hinder

installation.

– There may be electrical cables running between the interior

and the exterior of the roof. Disconnect all voltage sources

before starting the work (all poles).

– The roof load must not be exceeded (see vehicle manufac-

turer’s specifications).

– Check the interior installation site for obstructions.

– A wooden reinforcing frame (min. 25 mm) must be installed

around the roof cut-out between the upper and lower sur-

faces of the roof. The insulation may have to be removed.

When the skylight with safety ventilation is replaced by

the air conditioning system, it must be ensured that the

safety ventilation is restored in another suitable location.

Control panel cable

To simplify subsequent installation of BUS appliances, feed

the control panel cable that is supplied in the accessory kit

together with the mains cable through the false ceiling.

Fix the free end of the control panel cable to a suitable place,

such as in a wardrobe, as a connection point.

Cut-out installation 400 x 400

For optimum sealing we recommend the use of the sealing

frame that is available as accessory (part no. 40091-19000).

For installation with a sealing frame, please refer to the instal-

lation instructions provided with the sealing frame.

Installation of the appliance with an existing roof hatch:

the cut-out must be 400 x 400 mm.

Remove existing roof hatch (make cut-out bigger if necessary).

Remove sealant residue and unevenness.

Fill in screw holes with body sealant.

400

Fig. 13

For the other installation steps, please refer to “Preparation

for power cable connection and control panel cable”.

Installation with new cut-out

For vehicles without an existing cut-out:

required cut-out 350 x 380 mm.

Place template on installation location on vehicle, mark cut-

out (350 x 380 mm) and cut it out.

Mark the 4 holes (10 mm) for bracket attachment and drill

holes in the roof.

380

350

Fig. 14

Route the power cable and control panel cable to the connec-

tion point (lengthen the mains cable with the provided Wago

clamps if necessary).

If the lighting of the air distributor is also going to be

optionally operated using 12 V, the 12 V adapter that is

available as an accessory must now be connected. The instal-

lation instructions are provided with the 12 V adapter.

FRONT

Fig. 17

Securing the appliance

Screw the two brackets (marked with an arrow in the direction

of travel) to the appliance using the 4 provided M6x70screws

(with screw sealant).

Torque 1.8 Nm

If the roof is more than 50 mm thick, M6 screws

(length = roof thickness + 30 mm) with tensile strength of 8.8

must be used. The screws must be secured with low-strength

screw sealant (e.g. Loctite).

1.8 Nm

Fig. 18

Preparation for power cable connection and

control panelcable

Provide the lead-through to the connection point for the

mains cable and control panel cable, e.g. in the false ceiling.

FRONT

Fig. 15

Move the appliance to the roof in a horizontal position and

insert into cut-out. The arrow should point in the direction of

travel.

Fig. 16

Do not apply additional sealant between the air condi-

tioning system and the roof.

If the appliance has been turned over or is not horizon-

tal, you must wait for 2 hours before switching on the

device.

Push device forwards in cut-out as far as it will go.

Remove protective film from the appliance.

If the screws are used more than once (e.g. after removal)

they must be coated with low-strength screw sealant

again (e.g. Loctite) or the screws provided as spare parts used.

Use of roof thickness adapters

Slide in the base ring (1) and, depending on the thickness of

the roof, the roof thickness adapters (2 or 2+3 included in

scope of delivery) for roof thicknesses of 25 to 50 mm into the

air distributor as far as they will go. If the roof is thicker, use

additional 10 mm roof thickness adapters (see Accessories).

Maximum roof thickness 110 mm

25 – 30 mm = 1

31 – 40 mm = 1+2

41 – 50 mm = 1+2+3

Fig. 19

Securing the air distributor

Connect the cable from the air distributor and the control panel

cable to the control unit.

Fig. 20

Screw air distributor (arrow in direction of travel) to brackets

with 6 screws M6 x 12 mm.

Torque 1.8 Nm. If the torque is too great, the air distributor

can be damaged or its function impaired.

The covering tape that is available as an accessory can

be used to compensate for the gap between the air dis-

tributor and the roof.

1.8 Nm

Fig. 21

If the screws are used more than once (e.g. after removal)

they must be coated with low-strength screw sealant

again (e.g. Loctite) or the screws provided as spare parts used.

Insert the filter into the air distributor

Insert filters into panels and attach to the air distributor.

Fig. 22

Fig. 23

Fig. 24

Insert the panels into the air distributor small

Fig. 25

Fig. 26

230 V electrical connection

The 230 V electrical connection must always be made

by an expert (in Germany for example in accordance

with VDE 0100, part 721 or IEC60364-7-721). These instruc-

tions are intended only as additional information for a quali-

fied electrician; electrical work should not be carried out by

unqualified persons.

Connect the mains cable that has been routed to the connect-

ing point.

All cables must be secured with clamps!

An insulating device for providing all-pole insulation from

the mains with contact clearance of at least 3.5 mm must be

provided at the vehicle end for carrying out maintenance and

repair work.

Function check / remote control mounting

Attach the mounting for the remote control in the required

location.

All appliance functions must subsequently be tested as

described in the operating instructions.

The installer must check that the condensation traps are clear

after installing the system.

The operating instructions must be handed over to the vehicle

owner.

Andere Handbücher für Aventa compact plus AU

Inhaltsverzeichnis

Andere Truma Klimaanlage Handbücher

Truma

Truma Aventa comfort Bedienungsanleitung

Truma

Truma Aventa eco Bedienungsanleitung

Truma

Truma Aventa comfort Bedienungsanleitung

Truma

Truma Saphir comfort RC Montageanleitung

Truma

Truma Saphir vario Bedienungsanleitung

Truma

Truma Saphir comfort RC Bedienungsanleitung

Truma

Truma Aventa compact Bedienungsanleitung

Truma

Truma Saphir comfort RC Bedienungsanleitung

Truma

Truma Frostair 1500 Bedienungsanleitung

Truma

Truma Saphir compact Bedienungsanleitung

Truma

Truma Saphir vario Bedienungsanleitung

Truma

Truma Aventa comfort Betriebsanleitung

Truma

Truma Aventa eco Bedienungsanleitung

Truma

Truma Saphir compact Bedienungsanleitung

Truma

Truma Aventa compact plus AU Bedienungsanleitung

Truma

Truma Saphir comfort IR Bedienungsanleitung

Truma

Truma Saphir comfort RC Bedienungsanleitung

Truma

Truma Saphir vario Bedienungsanleitung

Truma

Truma Aventa eco Bedienungsanleitung

Truma

Truma Saphir comfort RC AU Bedienungsanleitung

Truma

Truma Aventa comfort Merkblatt

Truma

Truma Aventa comfort Bedienungsanleitung

Truma

Truma Aventa compact Bedienungsanleitung

Truma

Truma Saphir compact Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung