Trust 1290Z Bedienungsanleitung

1290Z POWERC@M OPTICAL ZOOM

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

User’s manual

Version 1.0

1290Z POWERC@M OPTICAL ZOOM

Thank you for your purchase. Register your product via our Internet site at

www.trust.com/register, so that you will be eligible for optimal guarantee and service support.

You will also be automatically informed of the development of your and other Trust products. UK

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

1290Z POWERC@M OPTICAL ZOOM

L I F E I S M O R E ! T R U S T U S T R U S T . C O M

Fig. 1a Fig. 1b

Fig. 1c Fig.1d

Fig. 2

Fig. 3 Fig.4

1290Z POWERC@M OPTICAL ZOOM

. C O M

Fig. 5 Fig. 6

Fig.7 Fig. 8a

Fig.8b Fig. 8c

L I F E I S M O R E ! T R U S T U S T R U S T

TRUST 1290Z POWERC@M OPTICAL ZOOM

! Read the ‘Quick Installation Guide’ before using the camera for the first time.

The basic functions of the camera are described here.

CONTENTS

1Int duction 2ro

1.1 Some general comments about photography 2

2Safety 2

2.1 Batteries 3

3Approval 3

4Explanation of the camera functions 3

5Inserting and removing the batteries 5

6Ins rting the memory 5

6.1 Formatting the memory 6

7Us settings 6

7.1 Setting the language of the OSD menu 6

7.2 Setting the date 6

8Ta ng photographs ( ) 7

8.1 Zooming in and out 7

8.2 Selecting the mode 7

8.3 Self timer ( ) 8

8.4 Focusing 8

8.5 Flash 8

9Recording video clips ( ) 9

10 View videos 9

ing pictures /

10.1 Display on the camera ( ) 9

10.2 Connecting the camera to a computer 10

10.3 Playback on television 11

11 Add onal settings 12iti

11.1 Capture mode 12

11.2 Settings in the Playback mode 13

11.3 Settings in the SETUP mode 14

11.4 Fitting the wrist strap 14

12 Soft are 14

12.1 Trust Photo Site 14

12.2 MGI PhotoSuite SE version 4.0 15

12.3 MGI Photovista 15

12.4 Deleting software and drivers 15

13 Verification after installation (Windows) 16

14 Troubleshooting 16

15 Technical specifications 19

16 Warranty conditions 19

TRUST 1290Z POWERC@M OPTICAL ZOOM

1 Introduction

This instruction manual is for users of the TRUST 1290Z POWERC@M OPTICAL

ZOOM. The camera is equipped with a 4 megapixel sensor and an optical zoom lens.

The photos are saved on the memory card supplied with the camera.

1.1 Some general comments about photography

Taking test pictures

Before taking pictures of a unique event it is sensible to take some test pictures first.

This is to make sure that the camera is working properly.

No damages can be claimed for a picture which is not satisfactory.

No damages can be claimed for unsatisfactory pictures caused by faulty working of

your camera or software etc.

Exchanging picture data

No guarantees are given that pictures made with this camera can be reproduced on

other apparatus, or that pictures made with other apparatus can be reproduced on

this camera.

Sunlight

Do not point the camera at the sun for long periods as this can damage the sensor.

Knocking / shaking

Do not shake the camera or knock it against something. This may cause a fault,

unsuccessful photographs, memory incompatibility or the loss of photographs from

the memory.

LCD display

Small black or bright spots can sometimes be seen on a LCD display. This is a

normal occurrence and has no influence on the quality of the image recorded by the

camera. When there are no more than 10 of these spots it is not necessary to

exchange the camera.

Exposing the LCD display to sunlight for a long time can cause defects.

Lens

Keep the glass of the lens clean. Use a cotton wool stick to clean the lens. If

necessary, use special cleaning fluid for camera lenses. Do not use any other

cleaning materials.

2 Safety

Read the following instructions carefully before using:

- The Trust 1290Z0 PowerC@m Optical Zoom does not require any special

maintenance. Use a slightly moist soft cloth to clean the camera.

- Do not use any aggressive materials such as petroleum spirit or turpentine.

These can affect the materials used.

- Never immerse the camera in a fluid. This can be dangerous and damage the

product. Do not use the camera in the vicinity of water.

- Do not try to repair the camera yourself.

TRUST 1290Z POWERC@M OPTICAL ZOOM

2.1 Batteries

- The Duracell Ultra batteries supplied with the device are not rechargeable. Do

not try to recharge these batteries. This can give rise to danger of an

explosion.

- Do not throw the batteries into a fire. The batteries could explode.

- Do not drill through the batteries.

- Keep the batteries out of reach of small children.

- Use solely NiMH AA batteries with this camera (at least 1800mAh).

- When the alkaline batteries (including Duracell Ultra batteries) are empty, ask

your local authority where you can dispose of them.

N.B.: standard NiCd AA batteries are unsuitable for use with this camera.

N.B.: do not use old and new batteries together, since the old batteries may

drain the new batteries.

N.B.: remove the batteries if the camera is not to be used for a longer period

of time. This will prolong the life of the batteries.

3 Approval

This product conforms with the essential requirements and other relevant provisions

stipulated by the applicable European directives. The Declaration of Conformity

(DoC) is available at www.trust.com/13984/ce.

4 Explanation of the camera functions

Please refer to Figures 1a to 1d inclusive.

Item Explanation Description

1 Shutter release

button

Press this button to take a photograph.

Dial for the selection of the mode.

SETUP Setup mode: For the adjustment

of the settings.

Capture mode: Taking

photographs. (Section 8)

Playback mode: Display

photograph(s). (Section 10)

2 Selector dial

Video mode: Recording a video

clip (Section 9)

3 Power Button Press the button to switch on the camera.

Press the button again to switch off the

camera.

4 Flash Use the built-in flash to highlight the subject.

5 Automatic exposure

indicator

Illuminated/flashes when the automatic

exposure function is used. (Section 8.3)

6 Lens cover Protects the lens when the camera is not in

use.

Slide the button downwards to open the

cover.

7 Lens The lens focuses the ima

e on the di

ital

TRUST 1290Z POWERC@M OPTICAL ZOOM

Item Explanation Description

image capturing circuitry. Make sure that the

lens remains free of dust and fingerprints;

take care not to scratch the lens.

8 +

Viewfinder The viewfinder is used to determine the

format of the photograph and its composition.

The actual photograph is taken through the

lens, not the viewfinder. The image may differ

when the digital zoom is used.

9 Indicator Indicates the current camera mode.

11 Control buttons Button to scroll through the menu, or

“Å” button: macro function (Section 8.4)

“Æ” button: automatic exposure (Section 8.3)

“Ç” button: mode (Section 8.2)

“È” button: flash settings (Section 8.5)

12 "W" button (zoom

out)

Use the Zoom-out button to zoom out on the

subject while in Capture mode.

13 "T" button (zoom in) Use the Zoom-in button to zoom in on the

subject while in Capture mode.

14 Indicator Indicates the status of the memory.

15 LCD display Use the LCD display to preview photos.

In the Setup menu the LCD display can be

used to view the configuration.

16 “MENU” Button: Press the “MENU” button to enter the menu.

17 “ENTER” button Use the “ENTER” button to confirm or perform

a function.

18 “DISPLAY” button Used to determine the presentation on the

LCD display. Turning the LCD display off will

save batteries.

19 Hook for the

carrying strap

For your convenience, attach the carrying

strap to the hook on the camera.

20 Battery cover Protects the batteries.

21 Memory card cover Protects the memory card.

22 USB connection The USB (Universal Serial Bus) port is used

to connect the camera to a PC for the transfer

of photos.

23 Tripod socket Use the tripod socket to fit a tripod to the

camera. This optional accessory is used to

stabilize the camera. This is ideal for

photography when little light is available, e.g.

at night.

24 Video-out

connection / adapter

connection

Connect your video-out cable to your TV and

this socket to use the television to preview

your images.

You can also connect an adapter (not

supplied with the camera) to this socket.

Table 1: camera functions

TRUST 1290Z POWERC@M OPTICAL ZOOM

Preparing the camera for use

5 Inserting and removing the batteries

Follow the instructions given below to insert or remove the batteries

N.B.: make sure the camera is turned off.

Open the battery cover and insert the batteries into the battery compartment as

indicated on the inside of the battery cover. Close the battery cover.

When the battery voltage begins to fall the battery indicator ( ) will be shown in the

LCD display. Replace the batteries in time.

N.B.: the camera case will become warm during use. This is normal.

N.B.: after inserting or replacing the batteries you will need to reset the date

and the time (see Section 7.2)

N.B.: turn off the LCD display to prolong the life of the batteries.

Battery life: It is preferable to use Ni-MH batteries rather than Alkaline batteries in

digital cameras. Trust’s product range includes a variety of Ni-MH battery chargers.

(please refer to www.trust.com/battery-chargers)

6 Inserting the memory

A memory card is supplied with this camera. You can save a number of photos on

this card. We recommend the purchase of a memory card with a larger capacity. This

will enable you to save more photographs (Table 2).

Memory cards can be purchased from, for example, a photography store.

Image quality 8MB 16MB 32MB 64MB 128MB

Fine: 3 11 23 48 97

Standard

(STD)

7 22 47 96 195

Basic 11 34 72 149 301

Economy

(ECO)

44 129 270 553 1118

Table 2: list of storage capacities

N.B.: to avoid damage to the memory card or the camera, turn the

camera off before inserting or removing the memory card.

N.B.: do not remove the memory card when the indicator is flashing.

Follow the instructions given below to insert the memory card.

Open the memory-card cover (21, Figure 1d) and insert the memory card as

indicated in the holder. Press the memory card into the slot until it clicks in place.

Remove the memory card by pushing it to release the lock. Remove the memory

card.

N.B.: the memory card fits only in one way in the camera. Do not force the

card into the slot. This can damage both the memory card and the

camera.

The external memory card needs to be formatted for optimum use. See Section 6.1.

N.B.: never remove the memory card while the camera is processing data.

(the green indicator is flashing (14, Figure 1c). This can result in the

loss of data, or defects.

TRUST 1290Z POWERC@M OPTICAL ZOOM

Symbol Mode Description

Photo, Playback, Video No memory card in the camera.

Photo, Playback, Video The camera is unable to recognize

the card. Check that the card has

been inserted correctly. Format the

card using the external card reader.

Playback No images stored on the memory

card.

Photo, Video Memory card is full. No more

images can be stored on the card.

Playback Playback not possible, for example

because the recording is damaged.

Table 3: memory symbols shown on the LCD display

6.1 Formatting the memory

For the optimum use of the internal memory or a memory card format the memory

before use.

N.B.: formatting the memory card will delete all data stored on the

card, inclusive of the images which have been write-protected.

N.B.: the card cannot be formatted in the write-protected mode (Lock).

1. Switch on the camera, and turn the selector dial to “SETUP”

2. Press the “MENU” button. See Figure 3.

3. Select [CARD FORMATTING] using the “Ç” button or the “È“ button

4. Press the “ENTER” button.

5. Select [YES] using the “Ç” button or the “È“ button

6. Press the “ENTER” button. The memory card will now be formatted.

7 User settings

7.1 Setting the language of the OSD menu

1. Switch on the camera, and turn the selector dial to “SETUP”

2. Press the “MENU” button.

3. Select [LANGUAGE] using the “Ç” button or the “È“ button (options: English,

German, French, Italian, and Spanish)

4. Select the language using the “Å” button or the “Æ” button

5. Your choice will be saved if you

a. Press the “ENTER’, “Ç” or “È” buttons

b. Change to another mode

c. Switch off the camera

7.2 Setting the date

1. Switch on the camera, and turn the selector dial to “SETUP”

2. Press the “MENU” button. See Figure 3.

Inhaltsverzeichnis

Andere Trust Digitalkamera Handbücher

Trust

Trust FlexCam Bedienungsanleitung

Trust

Trust 750 LCD POWERC@M ZOOM Bedienungsanleitung

Trust

Trust 962Z POWERC@M Bedienungsanleitung

Trust

Trust FAMILYC@M 500 FLASH Handbuch

Trust

Trust 735S POWERCAM ZOOM Bedienungsanleitung

Trust

Trust SPYC@M 300 Bedienungsanleitung

Trust

Trust 913 POWERC@M ZOOM Bedienungsanleitung

Trust

Trust PowerCam Optical Zoom 970Z Bedienungsanleitung

Trust

Trust PowerCam Mini DC-3500 Bedienungsanleitung

Trust

Trust POWERCAM OPTICAL ZOOM 910Z Bedienungsanleitung

Trust

Trust DC-4700 POWERCAM OPTICAL ZOOM Bedienungsanleitung

Trust

Trust 610 Bedienungsanleitung

Trust

Trust 735 Powercam Zoom Bedienungsanleitung

Trust

Trust SPYC@M 300S Bedienungsanleitung

Trust

Trust PHOTOCAM LCD 2300 Bedienungs- und Wartungsanleitung

Trust

Trust 1220S POWERC@M Bedienungsanleitung

Trust

Trust 820 LCD POWERC@M ZOOM Bedienungsanleitung

Trust

Trust FAMILYCAM 510FX Bedienungsanleitung

Trust

Trust POWERCAM 922Z Bedienungsanleitung

Trust

Trust 750 LCD POWERC@M ZOOM Bedienungsanleitung

Trust

Trust DC-4200 Bedienungsanleitung

Trust

Trust FAMILYCAM 300 Bedienungsanleitung

Trust

Trust POWERCAM VIDEO DV-2400V Bedienungsanleitung

Trust

Trust 735 POWERC@M ZOOM Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung