Trust Z1 ZIGBEE Bedienungsanleitung
ONLINE
HANDLEIDING
www.trust.com/zigbee
3 4
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
Index
1. Add a room 5
1.1 Edit/Delete room 6
2. Connect a ZigBee bulb 7
2.1 Connect a ZigBee Remote 11
2.2 Edit/Delete a device 13
3. Add scenes 14
3.1 Add/Delete action 15
3.2 Add/Delete delays 16
4Configure timers 17
4.1 Edit/Delete timers 20
5. Connect manually 21
5 6
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
11.1
1.1 Edit/Delete room1. Add a room
APress the + button at the top of the screen to add a new room
BFill in a name for the room you want to add.
CPress the ADD button to save the new room
ATo edit the name of a room press the pencil button at the top of the screen
BPress on the room name to begin editing.
CWhen you are done editing the name press the CONFIRM button.
DTo delete a room press the DELETE button in front of the room when in editing mode. Press the
CONFIRM button to go back to the room overview.
A
B
C
A
BD
C
7 8
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
2. Connect a ZigBee bulb
Make sure the ZigBee bulb is close to the Control station (Within 4 metres)
APress on a room name to open it.
BPress the + button at the top of the screen to add a new device.
CEnter a name for the device you want to add
DPress ADD
ESelect Trust Smart Home ZigBee Line and choose for ZigBee light
FPut the bulb in connect mode. (Check the manual of the bulb on how to put it in connect mode)
2
AB
C
D
EE
910
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
GWhen the ZigBee device is in connect mode press CONNECT.
HThe bulb is now added to your room. You can now control the bulb with the App.
IUse the buttons to control the device.
JTo change the color of a ZigBee bulb press on the color circle to open the color palette (Only for
RGB or Cold/Warm bulb)
KChoose the desired color.
LPress the BACK button to go back to the room.
G
HI
JK
L
1211
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
2.1 Connect a ZigBee remote
2.1
A
B
D
First reset your ZigBee remote before you connect it to the Z1. (Check the manual of the ZigBee remote
on how to reset it)
AAdd a new device (See chapter 2) and choose for ZigBee Remote control
BPress CONNECT in the App
CPress and hold the Smart Group button on the remote and wait untill the LEDs under the channels start
to blink. Wait for confirmation from the App that the connection succeeded.
DThe ZigBee Remote is now connected
To control a bulb which is already connected with the Control station with the remote the bulb
also needs to be connected to the ZigBee Remote. (Check the manual of the ZigBee remote on how
to connect it with a bulb) Notice: With the ZYCT-202 ZigBee Remote control RGB and Cold/Warm bulbs
can only be turned ON and OFF and can be dimmed.
Arm
5
C
14
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
13
3
2.2
ATo edit the name of a device first open the room which contains the device.
BPress the pencil button the enter edit mode.
CPress on the device name to begin editing.
DWhen you are done editing the name press the confirm button.
ETo delete a device press the DELETE button in front of the device when in editing mode. Press the
CONFIRM button to go back to the device overview.
With a scene you can trigger dierent devices at the same time or with an delay.
APress the scene button in the menu bar
BPress the + button at the top of the screen to add a new scene.
CFill in a desired name for the scene.
DPress OK.
2.2 Edit/delete device 3. Add scenes
ABC
E
D
A
B
C
D
15 16
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
3.1 3.2
APress the ADD ACTION button to add actions to the scene.
BAdd the desired actions for the devices by pressing the buttons.
CPress CONFIRM to add the actions to the scene.
DBy pressing the pencil button you enter edit mode.
EDelete an action by pressing the DELETE button.
FPress CONFIRM again to save the scene.
It is possible to add a delay between actions. First add an actions like described in step 3.1
APress the ADD DELAY button.
BChoose how long the delay must be by selecting a time period.
CPress the CONFIRM button to add the delay to the scene
DThe delay is now added to your scene.
EBy pressing the pencil button you enter edit mode.
FPress the DELETE button to delete a delay.
3.1 Add/delete actions 3.2 Add/delete delays
A A
B
C
D
E
F
B
E
F
D
C
17 18
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
4
With a timer you can trigger one or multiple devices on a fixed time, Sunrise or Sunset.
APress the Rules button in the menu bar
BPress the + button at the top of the screen to add a new timer.
CPress on Timer wizard.
DFill in a name for your timer and press OK.
EChoose the kind of start time for the timer. (In this example a fixed time is used)
FSelect the desired start time for the timer and press NEXT.
GChoose which days and in which months the timer should be triggered. (By default all days and months
are selected). Press NEXT
4 Configure timers
B
C
D
EFG
19 20
Z1 ZIGBEE CONTROL STATIONZ1 ZIGBEE CONTROL STATION
HChoose the desired actions for when the timer is triggered. Press NEXT
IA message appears asking if you want to add a timer to turn the devices OFF. Press Yes
JSelect the time you want the devices to be turned OFF. Press NEXT
KThe timers have been added to the overview.
LPress the pencil button the enter edit mode.
MPress on the timer name to begin editing.
NWhen you are done editing the name press the confirm button.
OTo delete a timer press the DELETE button in front of the timer when in editing mode. Press the
CONFIRM button to go back to the timers/rules overview.
4.1 Edit/delete timer
4.1
H
IJ
K
M
N
O
L
Andere Handbücher für Z1 ZIGBEE
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Trust Hausautomation Handbücher
Trust
Trust START-LINE Bedienungsanleitung
Trust
Trust ZCC-3500 Bedienungsanleitung
Trust
Trust WIRELESS POWER 300 Series Bedienungsanleitung
Trust
Trust Z1 ZIGBEE Bedienungsanleitung
Trust
Trust AWRT-1000 Bedienungsanleitung
Trust
Trust SMART Home START-LINE RECEIVER ACM-3500-3 Bedienungsanleitung
Trust
Trust AWST-6000 Bedienungsanleitung
Trust
Trust AWS-3500s Bedienungsanleitung
Trust
Trust START-LINE ACST-606 Bedienungsanleitung
