TScale ATP-6 Bedienungsanleitung

UG ATP/ASP/QTP/QSP -E1.64

ATP/ASP/QTP/QSP

Series

Price Computing Scales

User’s guide

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

Contents

SECTION 1 INTRODUCTION………………………………..……………….…...……1

1. 1 Figures……………………………………………………………..…………….1

1. 2 Specifications…………………………………………………….………...……1

1. 3 Dimension………………………………………………………………………..1

1. 4 Install ……………………………………………………………..……………1

SECTION 2 KEYBOARD DESCRIPTIONS…………………………….……………..3

SECTION 3 OPERATION…………………………………….……………...………….4

3. 1 General instruction……………………………………………………..……….4

3. 2 Basic operation…………………………………………..………………………4

3.2.1 Zeroing the scale……………………………………….……………..……….4

3.2.2 Tare……………………………………………………………………..……….4

3.2.3 Overload warning………………………………………….…………….…….4

3.2.4 unit price setting…………………………………………….………………….4

3.2.5 Change unit…………………………………………………..……..………….5

3. 3 Accumulator operation…………………………………………..………………5

3. 3.1 prepare to Accumulator……………………………………………..…………5

3. 3.2 Accumulator operation…………………………………….….………………5

3. 3.3 Account operation……………………………………………………..………5

3. 4.1Save the Unit price………………………………….….……………………5

3. 4.2 Load the Unit price…………………………………….………..……………5

3. 5 Other function……………………………………………………………………6

3. 5.1 backlight………………………………………………….……………………6

3. 5.2 Automatic unit price clear……………………………………………………6

3.5.3 Auto power off……………………………………………….…………………6

3.5.4 View audit operate………………………………………………………..……6

SECTION 4 SETTING OF PARAMETERS…………………………………..……….7

4. 1 Enter setting mode……………………………………………..……………….7

4. 2 Parameter setting table…………………………………………….……….….7

SECTION 5 RS-232 OUTPUT …………………………………………….……….……9

SECTION 6 BATTERY OPRATE

……………………………………………………………..…. 11

APPENDIX ERROR CODE…………………………………………………13

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 1 -

SECTION 1 INTRODUCTION

1. 1 FIGURES

◆Large LCD display

◆AC / Rechargeable battery

◆Selectable weighing unit

◆Accumulate operation

◆Account function, do memory recall, give change and memory clear one

time

◆Selectable reading resolution

◆Auto backlight

1. 2 SPECIFICATIONS

Model

Capacity

Division

ATP/ASP/QTP/QSP -6

6kg

2g/1g

ATP/ASP/QTP/QSP -15

15kg

5g/2g

ATP/ASP/QTP/QSP -30

30kg

10g/5g

1. 3 DIMENSION

300m

225m

340m

320m

125m

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 2 -

1.4 INSTALL

Keep the scale dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits.

This scale is not waterproof designed (IP44), avoid high humidity that might cause

condensation. Avoid direct contact with water. Do not spray or immerse the scales in

water. If scale meet water, reading data will be unstable, or scale will can’t work

correctly, please turn off the power immediately, warm the scale, or call your dealer.

Attach the main cable to the connector on

the bottom of the scale. The power switch is

located on the base near the front of the

scale.

Power switch is at the right side of bottom

cover, AC adapter jack also near the power

switch, see attached drawing.

Power switch

AC adapter jack

Level feet

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 3 -

SECTION 2 KEY DESCRIPTION

Each of the keys are shown and described for you.

ZERO The ZERO key zeroes the scale.

TARE The TARE key subtracts tare values and changes the ATP/ASP/QTP/QSP

from gross mode (no tare) to net mode.

SAVE The SAVE key used to disable or enable the price and tare auto-clear

Function

B/L The B/L key used to set the backlight mode (ON/OFF/AUTO)

ACCOUNT The ACCOUNT key is used to do memory recall, give change and

memory clear in one time

M+ The M+ key adds data to the accumulators. The second function print the

weight data

UNIT The UNIT key is used change unit.

PLU The PLU key used to store unit price memory and recall unit price from

memory

C The Ckey is used for canceling the memorized data.

0~9 The NUMERIC key (0~9) is used for setting unit price data.

DECIMAL POINT key is used for set the decimal position of unit price

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 4 -

SECTION 3 OPERATION

3. 1 GENERAL INSTRUCTION

1．When battery goes low, the light will be turned on automatically. It is the

time to charge the battery with the AC power. If ATP/ASP/QTP/QSP goes on

being used without proper charging, the display window will show “BAT LO” every

10 minutes, and ATP/ASP/QTP/QSP would be shut down automatically after 50

minutes of warning in order to protect the battery. Please charge the battery

immediately, or ATP/ASP/QTP/QSP cannot be used.

2．The display window will show color of orange when battery is being charged, and

it will turn to color green when battery is fully charged.

3．Before starting using ATP/ASP/QTP/QSP, please check if the bubble is in the

middle of the level ; if not, please make appropriate adjustment.

3. 2 BASIC OPERATION

3. 2. 1 Zero the scale

When there is no item on the scale but reading is not zero, press the key

to turn on ZERO indicator. When the weight goes over 20 % of the full

capacity, “read zero” function is obsolete.

3. 2. 2 Tare

Put container on the platter, once the weight reading is stable, press the

key, the TARE indicator will be on and the container’s weight will be deducted.

When it is time to clear the TARE, take off the container, and press key

again.

3. 2. 3 Overload Warning

Please do not add item that is over the maximum capacity. When reading

“—OL—“ and hear beeping sound, remove the item on the platter to avoid

damage to the load cell.

3. 2. 4 Unit price setting

To trade with your ATP/ASP/QTP/QSP scale, it is necessary to setting a unit

price of the goods, ATP/ASP/QTP/QSP then uses this unit price to determine

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 5 -

how much that goods are on the platter.

When ATP/ASP/QTP/QSP scale displaying the weight of the goods placed on

the scale, set the unit price through numeric keys. Set unit price is showed in

UNIT PRICE window display, TOTAL PRICE window display shows the total

price of the goods. To cancel the previous unit price, press CANCEL key .

3. 2. 5 Change unit

You can use the UNIT key to change unit. Press UNIT key will change the

weighing unit circularly, and the pertinent indicator will on.

3. 3 ACCUMULATOR OPERATION

3. 3. 1 Prepare to accumulate

Each time before accumulate，please make sure the platter is empty, the

current accumulator values is reset to zero, and the weight reading is stable.

3. 3. 2 Accumulative operation

Put the weighing item on platter，wait for the weight reading to be stable, press

the M+ key，the window will show ACC n，n being the number of times a count

operation had been performed.

3. 3. 3 Account operation

After do accumulate operate, you can press Account key, WEIGHT window

will show the summed price, key in paid money by keyboard, this will show on

Unit Price window, and the Total Price window will show the return value.

Press Tare key to return normal weighing mode and clear memory, if you don’t

want clear memory, press Zero key to return normal weighing mode.

Note: if you haven’t do accumulate operation, you also can use Account

function, the summed price is current total price.

3. 4 UNIT PRICE MEMORY

ATP/ASP/QTP/QSP can store 10 sets unit price.

3. 4. 1 Save the unit price

Hold the PLU key for 3 seconds after you key in the unit price, it will show “PS

0~9” , press numeric key 0~9 to select which memory location you want to use.

After you do, the unit price is stored in the ATP/ASP/QTP/QSP.

ATP/ASP/QTP/QSP Price Computing Scale User’s Guide

- 6 -

3. 4. 2 Load the unit price

If you want to use the unit price stored in the ATP/ASP/QTP/QSP, press PLU

key, ATP/ASP/QTP/QSP will shows “PL 0~9”, press numeric key 0~9 to select

which memory location’s price you want to use, current unit price will change

to the value stored in the memory.

3. 5 Other function

3.5.1 Backlight

ATP/ASP/QTP/QSP have three backlight mode: on, off and auto.

ON: backlight will turn on however current weight is zero or not Zero

OFF: backlight will turn off however current weight is zero or not zero

AUTO: backlight will turn on when current weight is not zero and it will turn off

if current weight is zero

You can press B/L key to set backlight mode, display will show current

backlight mode, press SAVE key to select backlight mode (ON/OFF/AUTO),

after you select, press TARE key to sure.

3.5.2 Automatic unit price clear

ATP/ASP/QTP/QSP can set automatic unit price clear, when return to zero,

ATP/ASP/QTP/QSP will clear the unit price automatically.

Press SAVE key will turn on / off automatic unit price clear function, when

SAVE indicator on, automatic unit price clear disable, when SAVE indicator off,

automatic unit price clear enable.

3.5.3 Auto power off

ATP/ASP/QTP/QSP scale have auto shut off function, you can set this

parameter.

Press ACCOUNT key during self-checking, display shows “sleep mode”,

press Speed 4 key to select 0/1/5/30 (not use auto power off / turn off power

after scale leisure for 1 minutes / turn off power after scale leisure for 5

minutes / turn off power after scale leisure for 30 minutes), press Tare key to

sure

3.5.4 View audit operate

Press SAVE key during self-checking, display shows AUDIT OPT AA CAL BB,

press ZERO key to escape.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TScale Skala Handbücher

TScale

TScale IP30 Bedienungsanleitung

TScale

TScale ROW Series Bedienungsanleitung

TScale

TScale QHW 15 Bedienungsanleitung

TScale

TScale JC Series Bedienungsanleitung

TScale

TScale ATW series Bedienungsanleitung

TScale

TScale T-Touch VX7-11 Bedienungsanleitung

TScale

TScale bw series Bedienungsanleitung

TScale

TScale JW Bedienungsanleitung

TScale

TScale TR-I Series Bedienungsanleitung

TScale

TScale AW20 Bedienungsanleitung

TScale

TScale ATP Bedienungsanleitung

TScale

TScale ATW Series Bedienungsanleitung

TScale

TScale X7-11 Bedienungsanleitung

TScale

TScale M501 Bedienungsanleitung

TScale

TScale IHB++ -300 Bedienungsanleitung

TScale

TScale NB Series Bedienungsanleitung

TScale

TScale TFB sereis Bedienungsanleitung

TScale

TScale ATW Series Bedienungsanleitung

TScale

TScale L10 Series Bedienungsanleitung

TScale

TScale ROW Series Bedienungsanleitung

TScale

TScale ROW Precision Balance Series Bedienungsanleitung

TScale

TScale s29 series Bedienungsanleitung

TScale

TScale T-Touch P18 Bedienungsanleitung

TScale

TScale JWP Installationshandbuch

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung