Tumaker NX PRO DUAL Bedienungsanleitung
NX PRO DUAL
USER MANUAL
ÍndEX
Printer Specications ................................... 2
Main parts of the printer................................ 3
Elements included in the printer.................... 3
Installation and set up ................................... 4
Quick guide ................................................... 6
Calibrate dual height......................................7
Calibrate Offset U and Y..................................8
Dual options.................................................. 9
Nozzle change...............................................11
Simplify 3D Printing Software........................11
Simplify 3D loading proles...........................11
Security........................................................13
Basic recomendations ................................. 13
Warranty ......................................................14
2
printer specifications
Printer Volume: 295x220x200 mm
Printer Mirror: 145X220x200 mm
Printer Size: 550x440x410 mm
Package Size: 605x501x500 mm
Package Weight: 32 kg
Printer Weight: 30 kg
Materials: ABS, ASA, NYLON, PET-G, PLA, PP,
XT-CF20, TPU, PLA-3D870, PVA
Printing speed: Depends on parameters
Energy Smart Management
Power Rating: 500W
Noise Level: 44 dB (closed door, 40dB)
Heated Bed: 45º - 150º
Build Plate Leveling:
· Semi-Automatica
· Manual
Layer Resolution: 10µm
Maximum Layer Height:
0,8 nozzle: 0.64mm
0,6 nozzle: 0,48mm
0,4 nozzle: 0,3mm
0,2 nozzle: 0,16mm
Pantalla: 5” táctil a color
Dispositivos de control: PC, tablet,
Smartphone.
Modo de control: Web
Connected to the Internet
Conetividad: USB, Wi
Nozzle Diameter:
0.2 - 0.4 - 0.6 - 0.8 - 1.2 mm
Nozzle Temperature: 45ºC - 300ºC
Nozzle Heat Up Time:
20ºC: 200ºC - 1’15” / 250ºC - 1’50” / 300ºC - 2’35”
Simplify3D Professional Software
1 Year Limited Warranty
3
Main parts of the printer
Make sure the following items have been delivered to you with the printer.
If not, please contact us.
HOTEND
It moves in the X and Y axes by melting the lament of material
and depositing it on the platform or heated bed. It has a nozzle
that heats up to the required temperature according to the
corresponding printing material
EXTRUDER
Supplies printing material to the head by extruding the lament.
PLATFORM OR HEATED BED
The printing happens on the surface of the platform; this one
moves along the Z axis. Depending on the printing material, it
must be heated to a dierent temperature.
The distance between the platform and the nozzle has to be
perfectly calibrated for optimum printing.
A
B
C
AHotend
7
3
4
8
2
BExtruder
7
3
6
5
A
B
C
9
1
Main parts of the
printer
Connector
Nozzle
Filament input
Drive
Bowden tube
1
2
3
4
5
6
7
Layer fan
Display
8Frontal fan
9Filament sensor
Elements included in the printer
MICRO USB
CABLE
4
Installation and set up
DISPLAY WIRING
To start with the installation and set up, connect the
power cable to the slot on the back of the printer and
plug it into the power socket. Switch on the printer by
pressing the button.
The light indicator will stay on while the printer is on.
DISPLAY SWITCH POWER SUPPLY
Pantalla
Connect your device to the network of the printer
•WiSSID: INDART3D_XXXXXX
•Password: indart3d
•Acces IP: 192.168.1.114
Access the web interface through the access IP in your browser
OPTIONAL: Connect the printer to the local network
If you want to put the printer on the network and access it from any device on the same network, follow the next step.
Go to Console, type and send: M587 S ”Name of your wi” P ”password of your wi”
If you know a free IP on your network, you can add the following commands after the password, leaving a space:
Ixxx.xxx.x.xxx otherwise the router will assign a random IP.
5
Access the Macros / Others / Connect to the NET section and run it. Next, on the printer screen you will see the assigned IP.
If you already have your IP, access from it, go to System and open the cong.g le
ATENTION changing parameters not indicated in this le may imply the malfunction of the machine
In the Network section replace: M552 S2 for M552 S1.
Click Save
Press YES to restart the board
I have the IP
• You can now access the printer from any device connected to this network
• If you have not entered the IP by command in the console, it is recommended to do so, so that the router does not change it:
M587 S ”Wi name ” P ” Password” I192.168.X.XXX
• If you have not obtained the IP or have any other problem, do not hesitate to consult at: https://indart3d.com/indart3d-en/support/
6
QUICK GUIDE
Level the Build Plate
• Heat the base to the temperature you want to print at
• Make sure you have a clean tip
• Execute the calibration process found in the Macros “Calibration” section and follow the steps
• Use the knurled nuts on the base to t the Nozzle to the Build Base
• If it was your rst calibration you may have to repeat this process
• During printing, ne-tune using Z Babystepping until proper adhesion is achieved
Load Filament
• Before loading make sure you have the base separated from the nozzle (min 10mm)
• Press Load Filament and select the material to use
• Follow the steps indicated on the screen
Load G-Code / Print
• In Jobs select: UPLOAD FILE (S) TO G-CODE and upload your “.gcode” le
• With the left button click on the le you want to print
• With the right button select more options
• You can create folders to organize your les by clicking
7
Step 2
• If the Right head is not at the same height, we must
loosen (a quarter of a turn) the four screws that are on the
back of the head (Allen key 2,5)
Calibrate dual height
Step 1
• Access the web interface of the machine
• In File Manager / Macros / Height Calibration select DART_Left Height
• Calibrate the base to the desired height
• Now click on Height DART_Right
Step 3
• Once the four screws are loosened, we will use the central
screw to raise or lower our head, once we have it at the
correct height we will tighten the 4 screws that we loosened in
the previous step
Step 4
• After tightening the 4 screws we will check that they are at the same height by alternating the macros Height DART_Left and
Height DART_Right
• If they are not at the same height, repeat steps 2 and 3
• You can use a gauge or a sheet of paper if it is more comfortable for you.
• Remember that to carry out this process the tips must be clean
• Make this check if you change tips
8
Step 2
• Once the piece is nished we will obtain a result like this
• We can see that the red pieces are displaced
• To adjust it we must modify the parameters in Cong.g
Step 1
• Access the web interface of the machine
• In File Manager / Macros / Calibrate Offset
• Run the le, set the temperature manually and make sure you have lament loaded, it is recommended to load PLA
CalibraTE Offset U AND Y
9
Step 4
• Once the change has been made and the plate restarted, print the calibration piece again
• Follow these steps until you are satised with the result
Step 3
• In File Manager / System / cong.g
• In the Tools section modify the parameter U and Y if necessary
• To put decimals use “. “
• Supports 2 decimal places
Print Mode Selection
• To print with the Left head we will select “Left Extruder Only”
• To Print with the Right head we will select “Rigt Extruder Only”
• If we want to print with a double head, either a two-color piece or a single piece and a support material, we will use “Dual Extruder”
• If we want to replicate a piece with the second head we will use “Mirror Mode” this will replicate everything that the Left head
prints
DUAL OPTIONS
10
Dual Extruder
• Import the two les to print in Dual and click Tools / Dual Extrusion Assistant
• Select the base prole template if you have more than one
• Congure the material to be used
• Place the les in the corresponding Header
• If the .stl are well designed they will have been placed in their corresponding place
• Save the le and upload it to your machine
• This is what the result should look like
Andere Handbücher für NX PRO DUAL
1
Inhaltsverzeichnis
Andere Tumaker 3D-Drucker Handbücher
