Tunix TT-07SP Bedienungsanleitung

Instrument

Manual

TT-07SP

Handheld High-Precision

Digital Thermometer

TABLE OF CONTENTS

Overview........................................................................................... 03

Specifications.....................................................................................05

Input Wiring and Notes......................................................................09

Display Screen.................................................................................. 11

Keypad Operation............................................................................ 12

Menu Settings.................................................................................. .16

Description of Menu Parameters...................................................... 18

Calibration........................................................................................ 20

Description of Prompt Information.................................................. 23

Accessories...................................................................................... 25

Optional Accessories....................................................................... 25

OVERVIEW

Handheld High-Precision Digital Thermometer, based on 24-bit A/D converters and 16-

bit MCU, features high precision, high stability, low power consumption, multiple input

types, multiple measurement results, easy operation, etc.

When suitable sensors are matched, it can be widely used for handheld precise

temperature measurement and

/mV/mA precise measurement in production, scientific

research and labs. Its main characteristics are as follows:

Pt100, Pt1000, Cu50, Cu100, K, S, E, T, J, R, B, N, as well as

, mV, and mA signals.

There are three compensation modes for thermocouples, including internal compensation,

external compensation and manual(simulated) compensation.

INPUT TYPES:

In addition to basic measurement values, the relative value, maximum value,minimum value,

average value, peak-peak value, standard deviation and sampling number can also be measured

at the same time.

MATHEMATICAL-STATISTICAL MEASUREMENT:

The highest resolution is 0.001℃ (RTD :Resistance Temperature Detector) or 0.01℃

(K/E/J/T/N thermocouple).

6-DIGITAL DISPLAY, RESOLUTION CAN BE SET:

Switchable among

or mV, ℃,

℉

and K.

FOUR DISPLAY UNITS FOR THERMAL RESISTANCES AND

THERMOCOUPLES:

CUSTOMIZED START-UP DISPLAY:

Including math modes, resolution, display units and the reference junction compensation modes.

PAGE -03

MISCELLANEOUS:

Clear LCD layout, white backlight,

Easy keypad operation and smart and exquisite appearance,

Upper limit alarm and lower limit alarm can be set, User calibration is provided,

Low power consumption; three AA alkaline batteries, 1,500 hours battery life(typical value,

backlight off

）

Adjustable sampling rate and the filter action.

Sensor offset correction

Display freezing

Automatic backlight shut-off, automatic power shut-off and low battery voltage detection.

PAGE -04

SPECIFICATION

MEASUREMENT RANGE AND ACCURACY

PAGE -05

SPECIFICATION

Notes:

1) Based on ITS-90

（

ITS: The International Temperature Scale); the environmental

condition: (23

5)℃,

≤

85%RH; it should be put in the stable environmental conditions for at

least one hour, wait 5 minutes after start-up, with the menu parameters of S_rAtE=1 and

FILt=1, exclusive of sensor errors. The tolerance is 1.2Δ in case of S_rAtE=2.

2) Using the method of

“

Calibration

”

in page 12 of this manual, the fixed error component

between sensor and thermometer can be eliminated.

3) The thermal resistance and thermocouple

’

s measurement range and tolerance

shown in other units (

, mV,

℉

and K) are equivalent to the above table.

PAGE -06

(2) RESOLUTION: THE HIGHEST RESOLUTION:

(3)

Stability of Indicating Values:

It is smaller than Δ/6 in a short period (10 minutes) and smaller than Δ/4 in a long period (8

hours).

Notes:

The stability of indicating values means the fluctuation range of indicating values at a stable

input, and is defined as a half of the value the maximum value minus the minimum value (i.e. a

half of P-P value). The stability of indicating values is associated with the input signal

magnitude, S_rAtE value and FILt value.

Measurement condition: the instrument is placed in the environment with

7 stable temperature and humidity for 1 hour, waiting 5 minutes after start-up,

S_rAtE=1, FILt=1, MAN compensation mode adopted for thermocouple, and

80%FS stable signals as input

PAGE -07

(4)Sampling Rate:

The sampling rate is set by the menu parameter S_rAtE.

(5) Power Supply and Power Consumption

: Three 1.5V AA batteries. The operating

current is no more than 1.5mA when the backlight is shut off, and about 27mA when

turned on.

(6) Conditions for Application Environment:

Ambient temperature : (0 50)℃,

Ambient humidity :

≦

85%RH

(8) Dimensions and Weight:

155 X 70 X 30 mm, about 0.25kg (batteries included).

(7) Environment conditions to ensure accuracy:

Ambient temperature : (23

5)℃,

Ambient humidity : 30 85%RH,

and there is no obvious electromagnetic interference.

PAGE -08

INPUT WIRING AND NOTES

1. Wiring for RTD and

type:

The 4-wire connection is adopted, which is shown as F1 in the above drawing.

Two wires on the left side of the plug are connected to one end of the RTD or

resistance, and two wires on the right side of the plug are connected to the other

end of the RTD or resistance.

Special Notes

: the 4-wire connection plug cannot be used as USB interface

purpose. It cannot be plugged into any USB sockets of computers or other devices so as

to avoid damage

PAGE -09

2. Wiring for DC mV signals:

Pure copper conductor wires, plugs, connection lugs should be used for

connection, which is shown as F2 in the above drawing. In order to minimize the

influence of thermoelectric potentials, the surface feculences should be eliminated timely. The

thermoelectric potentials for some materials and copper are as follows for reference.

With regard to thermocouple or mV signals, wait for at least 5 minutes after the plug

is inserted into the instrument, and start to measure after thermal balance so as to

reduce the impact of thermoelectric potential!

Wiring with the manual reference end compensation mode (MAN) or the external reference end

compensation mode (EXT): Compensation wires are used for connection from the thermocouple

to the constant temperature oven, and pure copper wires and plugs are used for connection from

the constant temperature oven to the instrument. With regard to the external compensation mode

(EXT), a four-wire Pt100 platinum resistance is required to be inserted into the constant

temperature oven, and a

four-wire plug is required to be connected to the RTD socket of the instrument,

which is shown as F4 in the above drawing.

Note 1: Insulation between the external wires of each socket should be ensured, or the

measurement results will be affected.

Note 2: If any signals exceeding 5V or 100mA are input, the instrument will be damaged.

PAGE -10

Andere Handbücher für TT-07SP

Andere Tunix Thermometer Handbücher

Tunix

Tunix TT-07SP Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Microlife

Microlife NC 200 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung