Turboair TA1500 Bedienungsanleitung

100L/MIN OIL-LESS

COMPRESSOR

WORKSHOP SERIES

MODEL NO. TA1500

Read this material before using this product.

Failure to do so can result in injury.

SAVE THIS MANUAL

Forspare parts or product information please email [email protected]

Silent portable compressor ideal for general

inflating tasks.

100L/MIN OIL - LESS COMPRESSOR

CONTENTS

INTRODUCTION..........................................................3

COMPONENTS AND CONTROLS................................8

OPERATING INSTRUCTIONS......................................9

STARTING AND STOPPING YOUR COMPRESSOR..10

USING THE INFLATOR.................................................11

TOOL CONFIGURATION.............................................11

TA1500 PARTS LIST......................................................14

TA1500 PUMP PARTS LIST.............................................15

WARRANTY ...................................................................16

100L/MIN OIL - LESS COMPRESSOR

SUGGESTED APPLICATIONS

You may use most light duty air tools with this Compressor.

Some examples of light duty tools are:

• Ball Inﬂator

• Toy Inﬂator

• Tyre Inﬂator

• Mini Airbrush

• Stapler

• Combo Nailer

This Compressor is NOT recommended for use with

a spray gun or medium duty air tools.

COMPRESSOR

SPECIFICATIONS:

Model: TA1500

VOLTAGE: 230V

FREQUENCY: 50Hz

Power: 1.5HP

Tank Size: 6L carry tank

Displacement: 190L/min 6.7CFM

FAD@7Bar: 100L/min 3.4CFM

[email protected]: 70dBa

Net Weight: 16.4kg

INTRODUCTION

Dear Customer,

Thank you for purchasing this Compressor which has passed

through our extensive quality assurance processes. Every

care has been taken to ensure that it reaches you in perfect

condition. However, in the unlikely event that you should

experience a problem, or if you require any assistance

please do not hesitate to contact us;

If you have a problem, call customer service do not return this

Compressor to the place of purchase.

CUSTOMER SERVICE

Euroquip NZ: 0800 387 678

Euroquip Australia: 1800 040 947

100L/MIN OIL - LESS COMPRESSOR

LUBRICATION OF COMPRESSOR

This inﬂator is OIL FREE. Therefore there is NO oil used for

lubrication.

ASSEMBLY

This Compressor MUST be fully assembled by you prior to

use.

Failure to do so will result in the warranty being VOID.

Failure to fully assemble this inﬂator may also result in

personal injury.

SAFETY

Before attempting to operate this Compressor the following

basic safety precautions should be taken to reduce the risk of

ﬁre, electric shock and personal injury. It is important to

read the instruction manual and to understand applications,

limitations and potential hazards associated with the

Compressor. This Compressor is not intended for use by persons

(including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

the use of the appliance by a person responsible for their

safety.

BEWARE OF CHILDREN

AND PETS

Children and pets should be kept out of the work area.

Children should not be allowed to touch or operate the

Compressor, tools or extension cords. This Compressor is not

designed for use by young children or inﬁrm persons without

supervision. The Compressor and tools should be kept out of

reach of children, preferably stored or locked in a secure

cabinet or room when not in use.

WORK AREA

Work areas and benches should be kept tidy. Cluttered

benches and work areas can cause accidents. Floors should

be kept clean and free from rubbish. Special care should

be taken when the ﬂoor is slippery due to sawdust or wax.

Always leave sufﬁcient distance, at least 5 metres between

the Compressor and the work area, especially when using tools

designed for sanding or spraying liquids.

WORK ENVIRONMENT

Do not expose your Compressor to rain or use in damp or wet

conditions. Keep the work area well lit.

GUARD AGAINST ELECTRIC SHOCK

Avoid body contact with earthed or grounded surfaces (e.g.

pipes and refrigerators).

DO NOT FORCE COMPRESSORS

The Compressor will do a better, safer job and give you much

better service if it’s used at the duty cycle for which it was

designed. The duty cycle will only take effect after the initial

(1st) tank ﬁll for the day. This compressors duty cycle is 50%.

Duty cycle is the proportion of time during which the Compressor

is operating compared with not operating. For example a

50% duty cycle could mean after 30 seconds of operation,

motor pumping, the Compressor must be left for 30 seconds

resting, motor not pumping. When the motor is pumping

the attached air tool can not be used. Only use the attached

air tool while the Compressor is not pumping. Stop using the

attached tool as soon as the Compressor starts pumping.

USE THE RIGHT TOOL

Select the right tool for the job. Do not use a tool for a job

for which it was not designed. Do not force a small Compressor

to do the job of a heavy–duty Compressor. Do not use the

Compressor for purposes not intended.

100L/MIN OIL - LESS COMPRESSOR

DO NOT ABUSE THE POWER CORD

Never yank or pull on the power cord to disconnect it from

the mains supply socket. Never carry or pull your compressor

by its power cord. Keep the power cord away from heat,

oil, solvents and sharp edges. Regularly check the plug

and cord and if damaged have it replaced by an authorised

service facility.

EXTENSION CORDS AND REELS

This compressor MUST be plugged directly into a 240V AC

wall socket.

This compressor is NOT designed to be run off an extension

cord/lead. If you need extra distance do NOT use an extension

cord, USE A LONGER AIR HOSE.

The use of extension cords may cause power voltage loss

and will result in damage to the motor. This will NOT be

covered under warranty.

SECURE THE WORK PIECE

Whenever possible secure the work piece using clamps or

a vice. It is safer than using your hands or feet and leaves

both hands free to control the tool.

HOT COMPONENTS

Beware many of the components will get hot during use.

Never touch any of the metal pipes, pump or motor as these

may burn.

MAINTAIN YOUR COMPRESSORS WITH CARE

Follow the instructions for use and changing accessories.

Check the compressor power cord periodically and if damaged

have it replaced by an authorised service facility. Keep

handles clean, dry and free from oil and grease. Ensure

that ventilation slots are kept clean and free from dust at

all times. Blocked ventilation slots or air ﬁlter can cause

overheating and damage to the motor and this will not be

covered under warranty.

DISCONNECT COMPRESSORS

Ensure that the compressor is disconnected from the mains

supply when not in use, before servicing, making

adjustments or when changing any accessories.

REMOVE ADJUSTING KEYS

AND WRENCHES

Form the habit of always checking to see that any adjusting

keys or wrenches have been removed from the compressor or

attached air tools before operating.

AVOID UNINTENTIONAL STARTING

Ensure that the switch is in the ‘OFF’ position before

plugging the compressor into the mains power supply.

PROTECT FURNISHINGS

If using the compressor inside your house, protect furnishings

and ﬂoors with a suitable dust sheet.

FIRE PRECAUTIONS

When using the compressor inside your house or workshop

general ﬁre precautions should be observed. As a

precaution it is recommended that an expert is consulted on

obtaining and using a suitable ﬁre extinguisher.

CLEANING YOUR COMPRESSORS

Always disconnect your compressor from the mains power

supply before you commence cleaning. Always ensure that

your compressor has cooled, about one (1) hour, before cleaning

and storing. When cleaning your compressor use only a damp

soft cloth. NEVER use liquid or solvents of any type.

100L/MIN OIL - LESS COMPRESSOR

WARNING

Only use Compressor when fully assembled.

Do not attempt to modify the compressor in any way; this will VOID your warranty.

The use of any attachment or accessory other than those recommended in this instruction manual could result in

damage to the compressor and could cause injuries to the operator.

This electric inﬂator complies with Australian / New Zealand and International standards and safety requirements.

Repairs should only be carried out by qualiﬁed persons using original spare parts. Failure to do so may result in

considerable danger to the operator.

PERSONAL SAFETY

Clothing

Do not wear loose clothing, jewellery or anything that could

get caught in moving machinery.

Hair

Long hair should be tied back or contained in a protective

covering.

Eye Protection

The use of safety goggles is highly recommended (normal

glasses are not sufﬁcient for eye protection) when using

compressor. Prescription glasses do not have safety lenses.

Footwear

Where there is the risk of heavy objects or if there is a risk

of slipping on wet or slippery ﬂoors, suitable non–slip safety

footwear should be worn. Protect your feet from dropping

accidents.

Ear Protection

The use of ear protection is highly recommended when

using compressor. The continual noise may damage your ears.

Respiratory Protection

When operating any machinery that creates dust or when

spray painting, an approved dust / ﬁlter mask must be worn.

When machining concrete, man made ﬁbres, especially

MDF (Medium Density Fibre board), the resin used in these

materials can be hazardous to your health. Use an approved

face mask with replaceable ﬁlter.

Do Not Over Reach

Do not over reach. Keep a proper footing and maintain your

balance at all times. Avoid using abnormal stances and

awkward body positions.

Stay Alert

Watch what you are doing, use common sense, and never

operate a compressor when you are tired, drinking alcohol, taking

drugs or if taking medication that causes drowsiness.

CHECK DAMAGED PARTS

Before using the compressor it should be carefully checked

to determine that it will operate properly and perform its

intended function.

Check for the correct alignment of moving parts ensuring

that they do not bind. Check for broken or missing parts

and have them replaced or repaired at an authorised

service facility. Check any other condition that may affect

the operation of the compressor. A guard or any other part of

the compressor that is damaged should be properly repaired or

replaced by an authorised service facility unless otherwise

indicated in this instruction manual.

Any switch that does not operate correctly must be replaced

by an authorised service facility.

DO NOT use the compressor if the ‘ON / OFF’ button does not

turn the inﬂator ‘ON’ and ‘OFF’.

100L/MIN OIL - LESS COMPRESSOR

SPECIFIC SAFETY INSTRUCTIONS

Warning! Do not use the compressor in areas where there is a

risk of explosion or ﬁre from combustible materials. The

sparks generated from certain tools attached to compressor can

ignite combustible materials as well as ﬂammable liquids,

paint, varnish, petrol, ﬂammable gases and dust of an

explosive nature. As a precaution it is recommended that

you consult an expert on a suitable ﬁre extinguisher and its

use.

• Do not attempt to modify the compressor, guards or the supplied

accessories in any way.

• Domestic compressor are designed for intermittent operation.

Ideally a 50% duty cycle. (Meaning. 30 seconds ON motor

pumping and 30 seconds OFF, motor not pumping). When the

motor is pumping the attached air tool can not be used. Only

use the attached air tool while the inﬂator is not pumping.

• Stop using the attached tool as soon as the compressor starts

pumping.

• Fully assemble compressor before use.

• Always ensure your compressor is level and stable.

• Never use an extension cord with this inﬂator always use a

longer air hose.

• Never connect to a generator which does not produce

sufﬁcient power, at least 1500W and has pure sine wave

power output.

• Domestic compressors are not designed for

industrial / commercial applications.

• Domestic compressors are not designed for continuous

running. Always follow duty cycle - 50%.

• Avoid touching the pump area as it can become very hot

and may burn.

• Ensure that the compressor is disconnected from the mains

supply when not in use, before servicing, making

changes and when changing attachments such as air

hoses / tools.

• Always use the correct type of tool for the operation to be

carried out.

• Never use the compressor if any part of the unit is damaged.

Always have the compressor serviced by an authorised

service agent.

• Always wear safety eye, ear and respiratory protection

when operating the Compressor.

• Allow the tank to completely ﬁll before using the compressor.

• If the compressor makes an unfamiliar sound or vibrates

excessively, switch the Compressor ‘OFF’ immediately and

disconnect from the mains power supply. Investigate the

possible cause or consult your authorised service facility.

• Always move the compressor using the handle and wheels.

• Always use the compressor on stable ground.

• This compressor is designed to compress normal air. Never

use to compress any other type (s) of gases.

• Never direct the jet of air or other liquids / gases towards

your body, other persons or animals.

• Never direct the jet of air or other liquids / gases towards

this compressor.

• This compressor is not suitable for pharmaceutical, food or

sanitary purposes.

• This compressor is not to be used to for ﬁlling scuba or

oxygen air bottles or tanks.

• Always follow the instructions relating to the tools

attached to this compressor.

IMPORTANT

ELECTRICAL DATA

This compressor is ﬁ tted with a sealed electrical connection plug that is compatible with the mains power supply for Australia

/ New Zealand and meets the requirements of Australian Standards. This compressor must be connected to a supply voltage

that is equal to that stated on the rating label. If the mains power connection plug or power cord becomes damaged it

must be replaced with a complete assembly that is identical to the original, and this must be replaced by an authorised

service centre. Always follow the Australian / New Zealand requirements for connection to the mains supply. If in doubt

always consult a qualiﬁed electrician.

100L/MIN OIL - LESS COMPRESSOR

COMPONENTS AND CONTROLS

Pic. 1

1. Pressure switch

2. On / Off button - red colour

3. Handle

4. Quick Connect Outlet

5. Pump

6. Tank

7. Rubber feet

8. Tank drain tap

9. Tank pressure gauge

10. Air ﬁlter

11. 10A Plug

12. Air Filter “Quieting Tube”

13. Outlet pressure gauge

PIC. 1

100L/MIN OIL - LESS COMPRESSOR

OPERATING INSTRUCTIONS

Unpacking

Carefully unpack your compressor. Dispose of all packing

material in an environmentally responsible manner.

Assembly

.noitarepolaitinierofebylbmessaronimseriuqercompressorruoY

Check that you have all required components required for

assembly and initial use.

Rubber Stopper

To attach the rubber stopper to the bracket located on the

bottom of the tank;

1. Undo the nut and remove the washer.

2. Push through the bracket and replace the washer.

3. Tighten the nut, Pic. 2

Air Filter

The supplied air ﬁlter must be used.

Failure to do so may result in irreparable damage and will

void the warranty, Pic. 3

To install;

1. Carefully screw supplied air ﬁlter into the threaded hole

on the top of the pump head. This only needs to be done

up by hand. Do not use tools to tighten air ﬁlter.

NOTE: Do not OVER TIGHTEN as this may damage the air

ﬁlter or cylinder head which will NOT be covered under

warranty.

Once air ﬁlter is installed, ﬁt the quieting tube. The quieting

tube pushed into the small air ﬁlter inlet hole.

PIC. 2

PIC. 3

WARNING

Do not attempt to operate this compressor until it is fully

assembled.

Damage caused due to incomplete assembly will not

be covered under warranty.

Ensure the compressor is disconnected from the power

supply before carrying out any assembly, maintenance

or adjustments on the machine.

STARTING AND STOPPING YOUR COMPRESSOR

100L/MIN OIL - LESS COMPRESSOR

10.

NOTE: Always ensure that you plug your compressor into a

standard 240V AC power point. Never use an extension cord

as this can lead to a voltage drop which may cause power

loss and over heating. Use a longer air hose if you need to

get closer to your work area.

Always start and stop the compressor using the

ON/OFF button onthe Pressure Switch (Pic.1 Item 1 and 2 as

wellas Pic. 4). Damage caused by not using this buttonwill not

be covered by warranty.

ON;To turn your Compressor

Lift up the red ON / OFF button on top of the pressure switch

To turn your To turn your Compressor OFF;

Push down the red ON / OFF button on top of the pressure

switch

RUNNING IN YOUR NEW COMPRESSOR

Your compressor does not require running in. Before use ensure

you have read and understood these instructions.

Before use ensure this compressor is fully assembled as per

page 10.

Positioning your new compressor

Choose a location away from your work area and near to a mains

power point.

NOTE: 1. Never use an extension lead. Always use a longer

air hose

2. Always position compressor on level ground

3. Always position compressor away from work area so

that the compressor does not get covered in dust or paint -

use a longer air hose to ensure compressor is in clean air

PIC. 4

Push button

down for off

Lift button

up for on

Inhaltsverzeichnis

Andere Turboair Luftkompressor Handbücher

Turboair

Turboair WORKSHOP TA3050 Installationshandbuch

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

GMC

GMC GAC1500 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Sullair

Sullair 185 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung