Turnstiles DS7200 Bedienungsanleitung

Please read and follow theinstallation instructions before

operating the equipment, and save the instructions for future reference orfor

future users.

Speed Gate Turnstile

User Manual

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

TABLE OF CONTENTS

1. Brief introduction..........……………

2. Functional features…………………

3. Main specifications……………………

4. Product structure and working principle…………

4.1 Electronic control system of channel gate………………

4.2 Operating principle of the system…………………………

5. Equipment installation………………………………

5.1. Equipment installation instructions………………………

6. Device function debugging…………………………

6.1 Key description……………………………………………

6.2 Function parameter setting………………………………

6.3 Main board wiring instructions……………………………

7. Common fault handling……………………………

8. Customer service……………………………………

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

1. Brief Introduction

The Speed gateturnstile has undergone years of R&D. The device

integrates mechanical, electronic, microprocessor control and various

reading and writing technologies.

The appearance of the equipment hasstainless steel plate laser welding

molding, beautiful and generous shape, rust-proof, durable, and external use of

standard electrical interface, bar code card, ID card, IC card and other card readers

can be easily integrated in the equipment, to provide civilized and orderly access

for personnel, but also can eliminate illegal personnel access; In addition, the

system is specially designed to meet the fire requirements of the function, in the

case of emergency, to ensure that the passage unimpeded, convenient personnel

timely evacuation;

2. Functional Features

1) With zero self-check function, convenient for users to maintain and use;

2) Illegal entry with alarm function;

3) Anti-impact function, when no signal is received, the door will automatically lock

or alarm;

4) Infrared anti-clamping function;

5) It has the automatic reset function of timeout. After the pedestrian reads the valid

card, if the pedestrian fails to pass within the specified time, the system will

automatically cancel the pedestrian's permission to pass;

6) Unified standard external electrical interface, which can be connected with a

variety of card readers, and can achieve remote control and management through

management computer.

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

3. Main specification

Frame material

304 stainless

steel

Input power AC220V/110V, 50/60Hz

Working voltage 24 V DC Drive motor 24V dc motor

Working temp. -20℃- 75℃Relative

humidity

relative humidity ≤90%,

no condensation

Opening signal Relay dry

contact signal

Communication

interface RS232

Application Indoor Traffic speed 35-40 people/min

4. Product Structure and Working Principle

4.1. Electronic control system of channel gate

The electronic control system consists of card reader, main control board, infrared

sensor, direction indicator board, alarm, transformer, etc.

Card reader (self-provided): after reading the information on the card and judging

and processing, send the application pass signal (switch signal) to the main control

board.

Master control board: the control center of the system, which receives signals

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

from the card reader and infrared sensor, makes logical judgment and processing

of these signals, and then issues execution commands to the direction indicator,

motor, counter and alarm.

Infrared sensor: detect the pedestrian position and play the role of safety

protection.

Direction indicator light: displays the current status of the channel and guides

pedestrians to pass through the channel in a safe and orderly manner.

Alarm: when the system detects pedestrians entering the passage illegally, it will

send out an alarm.

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

Alarm

Name Function

Entrance guard system

IC/ID card access control, fingerprint device,

face recognition, QR code device,

gate opening signal on the control board of

gate machine, remote control,

button to open the door (optional)

2 Control board

The control center of the system,

which receives signals from the card reader

and infrared sensor, and makes logical judgment

and processing of these signals,

and then sends out execution commands to the

direction indicator, motor, counter and alarm.

3 Infrared sensor Detect the position of pedestrians and safety protection

4 Direction indicator Display the current traffic sign status of the gate

and guide pedestrians through the gate

5 Alarm (speaker)

When the system detects a pedestrian illegally entering

the passageway, it gives an alarm.

6 Motor Drive the mechanism

7 power supply Switch Control panel power supply

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

4.2. Operating principle of the system

A). Turn on the power and the system will enter the working state after 3 seconds.

B). When the card reader reads an effective card, the peal speaker will make a

pleasant sound to remind the pedestrian that the card is read successfully. At the

same time, it will judge and process the information read from the card and send an

application signal to the main control board.

C). The main control board receives the signal from the card reader and infrared

sensor, and after comprehensive processing, sends an effective control signal to

the direction indicator and the motor, so that the direction indicator sign turns into a

green arrow pass sign. At the same time, the brake sends a setting voice, the main

control board controls the motor operation, and the gate opens to allow pedestrians

to pass.

D). after the pedestrian passes through the channel according to the direction

indicator sign, the infrared sensor senses the whole process of the pedestrian

passing through the channel and continuously sends signals to the main control

board until the pedestrian has passed through the channel completely;

E). If the pedestrian forgets to read the card or reads the invalid card to enter the

channel, the system will forbid the pedestrian to pass, and will issue a voice alarm,

until the pedestrian exits the channel, the alarm will be lifted; Reread valid

chi-square allowed pass.

5. Equipment Installation

Attention: During installation and construction, relevant circuits should be

disconnected to ensure that all circuits are correct before energizing.

5.1. Equipment installation instructions

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

1. Prepare the equipment installation tools and check the accessories according to

the packing list.

2. After finishing the foundation surface of the installation equipment, arrange the

equipment well.

3. After the hole location is determined, drill the hole and embed the anchor bolt or

expansion bolt of M12.

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

4. Put the strong electric cable and weak electric cable through 3/4 "PVC pipe and

bury them in cement to the corresponding position.

5. Open the case door, select one of the equipment as the reference (it is better to

choose the middle one as the reference), align the bolt hole of the machine seat

with the corresponding anchor bolt, and tighten the nut first.

6. Refer to the wiring diagram, connect the power line and control line well, and

connect the system ground wire protection.

7. After check, if the equipment status is normal, the following function debugging

can be carried out.

8. Check the mains wiring according to the wiring diagram, check the power wiring

and other wiring of the whole equipment is correct, the debugging can be done

after confirmation.

6. Equipment function debugging

6.1 Key description

Long press "menu” for 3 seconds -- to enter the L-series, press "up” enter L-2...

Press "ok" again to enter the H-series, press up or down to make adjustment, press

"menu key" to return and save, and press "ok" to exit the setting option.

Long press "menu key" for 3 seconds -- enter l-1 and press "down key" plus value

d-2...

www.TURNSTILES.us | [email protected] | 303-670-1099

Speed Gate Turnstile User Manual

Press "ok" again to enter the h-series adjustment value "up key - plus value" "down

key - minus value", press "menu key" to return and save, and press "ok" to exit the

setting option

6.2 Function parameter setting

<L-1 >Opening time of entrance and exit (default 6 seconds)

Setting the opening time of swinging door after swiping card authorization.

<L-2 >Set working method

0: swipe card from left & right

1: left infrared sensor, right swipe the card

2: right infrared sensor, left swipe the card

3: infrared sensor left and right

< L-3 > Delay closing time

Set closing time after pedestrian pass the channel (default: 0.2s), can be set from

0-50s

< L-4 > Left pass voice speaker

Default: 1: Welcome

Voice speaker number code from 0 to 18

For example: 0: Welcome, 1: Welcome back

< L-5 > Right pass voice speaker

Default: 15: Safe Travel

Voice speaker number code from 0 to 18

For example: 0: welcome, 1: Welcome back

< L-6 > infrared stack time (second)

www.TURNSTILES.us | [email protected] | 303-670-1099

Inhaltsverzeichnis

Andere Turnstiles Drehkreuz Handbücher

Turnstiles

Turnstiles OMD22 Bedienungsanleitung

Turnstiles

Turnstiles mWing Bedienungsanleitung

Turnstiles

Turnstiles AG Series Bedienungsanleitung

Turnstiles

Turnstiles HZ-SWGS01 Bedienungsanleitung

Turnstiles

Turnstiles OST Bedienungsanleitung

Turnstiles

Turnstiles HZ-FHTS03 Bedienungsanleitung

Turnstiles

Turnstiles HZ-SLBS02 Bedienungsanleitung

Turnstiles

Turnstiles HZ-FHTS04 Bedienungsanleitung

Turnstiles

Turnstiles HS400 Series Bedienungsanleitung

Turnstiles

Turnstiles TPW-321ASP Bedienungsanleitung

Turnstiles

Turnstiles MPW 112 Technisches Handbuch

Turnstiles

Turnstiles HZ-FHTS05 Bedienungsanleitung

Beliebte Drehkreuz Handbücher anderer Marken

Oxgard

Oxgard CUBE C-10 Bedienungsanleitung

LBA GROUP

LBA GROUP LBAT10 Bedienungsanleitung

Magnetic

Magnetic mTripod Bedienungsanleitung

Kaba

Kaba Argus HSG-E02 Bedienungsanleitung

Automatic Systems

Automatic Systems TR491 Bedienungsanleitung

DSI

DSI DST-80 Bedienungsanleitung

OZAK

OZAK VP-125 Handbuch

Automatic Systems

Automatic Systems SMARTLANE SL 90X Bedienungsanleitung

Alvarado

Alvarado MT Montage- und Bedienungsanleitung

JKDC SECURITY

JKDC SECURITY JKDC-100C Bedienungsanleitung

Alvarado

Alvarado SU5000 Bedienungsanleitung

Magnetic Autocontrol

Magnetic Autocontrol MPT 33 Bedienungsanleitung

Oxgard

Oxgard Praktika T-04K Kurzanleitung

digicon

digicon CATRAX Plus Bedienungsanleitung

Oxgard

Oxgard CUBE C-04-s Bedienungsanleitung

BOON EDAM

BOON EDAM Turnlock 100 Leitfaden

Wano

Wano Tripod BO-DSN10 Bedienungsanleitung

Timewatch

Timewatch TWLD-TS2700 Bedienungsanleitung