TURY FAST 3.0 Bedienungsanleitung
FAST 3.0
2. INSTALLATION
3. PROGRAMMING AND SETTINGS
2.1 Tools and parts required
2.2 Electronic accelerator in the car
2.3 Installing FAST in the electronic accelerator
3.1 Download
3.2 Initial settings
3.3
Pairing
3.4 Accelerator pedal programming
3.5 Learn how to use your Fast
3.6
Activation and Deactivation of the Parking Function
3.7 Activation and Deactivation of the Lock Function
3. 8
Automatic closing function by TURY App
3.9 User Control and Password Pairing Function
1.APRESENTAÇÃO
www.tury.com.br
5.1
Troubleshoot
4.1
Technology
5. VALIDATION
4. SECURITY
1.1 Functions
1.2 Characteristics
1.3 Technical Specifications
1.4 Application
1.5 Package Content
1.PRESENTATION
2
www.tury.com.br
CONGRATULATIONS, YOU HAVE PURCHASED A HIGH QUALITY PRODUCT THAT
FROM NOW ON WILL ALLOW YOU TO IMPROVE YOUR VEHICLE BY ADJUSTING
IT TO YOUR DRIVING PREFERENCES. FAST REDUCES THE ORIGINAL
ACCELERATION RESPONSE TIME DELAY, SO YOUR VEHICLE WILL HAVE THE
SAME TECHNOLOGY ALREADY USED IN HIGHEND SPORTS CARS, WITHOUT
CAUSING ANY INCOMPATIBILITY WITH YOUR VEHICLE. CAN BE OPERATED
THROUGH THE TURY APP.
Read the entire installation manual completely. Pay special attention to the icons below,
because they have fundamental installation tips.
1. PRESENTATION
We recommend that the installation of TURY products is always done by an
experienced, skilled and qualified professional who has all the necessary
tools to install our products.
ATTENTION, TIPS
AND CARE
TECHNICAL SUPPORT:
JUST CLICK TO
START THE SERVICE
VIDEOS:
PROGRAMMING, SETTING
INSTALLAT ION AND TIPS
THE AVERAGE
INSTALLATION TIME IS
ABOUT 5 MINUTES
INSTALLATION
TIME:
3
www.tury.com.br
1.1.1 FAST: It is the main feature of the product, it provides 4 acceleration maps with 9 levels
of adjustment that allow the user to adjust the acceleration profile of the vehicle according to
his needs and preferences. It is the same feature already present in high-end vehicles, now
available for your vehicle.
1.1.2 ORIGINAL MODE: Feature that allows the deactivation of the FAST returning the
original factory operation mode. It can be easily activated at any time via the App.
1.1.3 PARKING: This function limits the vehicle's acceleration and can be adjusted between
15% and 50% of the acceleration level. Indicated for occasions such as: parking lots, use of the
vehicle by third parties, workshops and other situations, and can be easily activated or
deactivated (by password) defined by the vehicle user.
1.1.4 LOCK: This function blocks the operation of the vehicle's electronic accelerator and is
indicated as an anti-theft device or when the owner does not want the vehicle to be used by
third parties. Its activation is done through a password in the App, and when activated it
blocks the vehicle's throttle operation.
1.1 FUNCTIONS
1.2 CHARACTERISTICS
• It can be installed in any vehicle equipped with electronic accelerator, with manual or
automatic transmission and with any type of fuel, from light vehicles, pick-ups, SUVs, Vans,
motorcycles, etc;
• Its installation is done through an original connector already existing in the vehicle, in a
very fast and simple way, keeping all the originality and warranty of the vehicle;
• From the installation on, any acceleration to which the vehicle is subjected, including
reverse gear, there will be a gain in response while the product is activated in FAST mode and
according to the selected acceleration level;
• FAST always stores the last acceleration level used in each map. It does not lose the
settings in case of battery failure;
• Exclusive Tury App to control all functions by smartphone.
4
www.tury.com.br
Vehicles with electronic accelerator, manual or automatic transmission, and with any type of
fuel.
To check vehicles (makes, models, versions, and years) to which this product is applicable
go to www.tury.com.br and search in the product finder.
1.4 APPLICATION
1.3 TECHNICAL SPECIFICATIONS
2. INSTALLATION
1.5 PACKAGE CONTENTS
• Electronic Module
• Plug and Play Main Harness
• Nylon Clamp
• Consumption Current: 10mA;
• Voltage: 3V3/5V
2.1 TOOLS AND PARTS REQUIRED
* The tools and parts above are not included with the product.
GLOVES
ANTI-NOISE FOAM SCREW DRIVERINSULATING TAPE
INSULATING TAPE
MULTIMETER
5
www.tury.com.br
10minutes
Location of the original
vehicle connector
Accelerator pedal
Original harness
2.2 ELECTRONIC ACCELERATOR IN THE CAR
If you do not have a multimeter, with the driver's door open, turn off and remove the
ignition key and wait 10 minutes to perform step 2.4 (Step Two).
This time is needed to terminate the timed power supply to the original electronic accelerator
pedal module, in many vehicles this time is less. In vehicles equipped with the presence key,
keep it out of the vehicle. On many vehicles, stepping on the brake during the original timer
resets the power supply.
Locate in the accelerator pedal connector the pedal power supply wire that is at 5 Volts
with the ignition on, then with the door open turn off the ignition and wait for the power
supply to drop to 0 Volts, and only after the pedal has no power supply remove the connector
to proceed to item 2.4 (Second Step).
Connect to vehicle negative (-)
* Image merely illustrative.
If the original vehicle connector is disconnected with the electronic
throttle energized, the malfunction light on the vehicle's dashboard may
be activated, in some vehicles you will need an automotive scanner or
disconnect the battery to clear this light. In some cases it is possible to
turn the light off by turning the car off and on again after a few times.
6
www.tury.com.br
2.3 INSTALLING FAST IN THE ELECTRONIC ACCELERATOR
In some vehicles it is necessary to loosen the throttle body frame bolts
to access the electrical connection of the original electronic throttle
connector.
1º Make sure that the electronic throttle is de-energized;
2º Disconnect the throttle connector (remember, only perform this step after performing
the item 2.2);
3º Connect the original throttle connector to the FAST connector;
4º Connect the FAST connector to the electronic throttle.
Fix the FAST central unit with the plastic clamp in a place where it is completely isolated;
After the fixation of the central unit and the FAST harness, isolate them with foam tape to
avoid noise in the vehicle.
See the example below and follow the same sequence for installing FAST.
1º 2º 3º
4º Final Installation
MAKE SURE THAT THE ELECTRONIC
THROTTLE IS DE-ENERGIZED
CAUTION
DISCONNECT THE ELECTRONIC
ACCELERATOR CONNECTOR
ACCELERATOR
ORIGINAL CONECTOR
CONNECTION BETWEEN
ORIGINAL CONNECTOR
AND FAST CONNECTOR
CONNECTION BETWEEN
FAST CONNECTOR AND
ELECTRONIC ACCELERATOR
Location of the original
Vehicle connector
Accelerator pedal
Original Harness
FAST connectors
FAST Harness
7
www.tury.com.br
Example:
The connectors of this product have a correct position to be fitted in the vehicle, if these
connectors are installed in an inverted way in the electronic accelerator or in the original
harness, anomalies can be generated in the vehicle. Note that the connectors have a
mechanical design that ensures they do not reverse, however, if they are positioned the
wrong way around by applying excessive force, it is possible to make a reverse connection.
To avoid this, observe below in this press release an example of a connector with the
indications circled in yellow or red, and make sure that during the installation the FAST
harness is connected in the same position as the original harness, where it was connected to
the accelerator at these points.
Make sure that when connecting the FAST, the same positioning is maintained as
shown above.
1) Always keep the female connector lock of the FAST on the same side that the
original female connector lock was connected to the electronic throttle.
2) Straight corners with straight edges (yellow circles) and rounded corners with
rounded edges (red circles).
3) Pay the same attention to connectors that do not have a lock.
Lock
*This attention applies to any connector model, with or without latching, at the
time of installation.
L
8
www.tury.com.br
3. PROGRAMMING AND SETTINGS
The application for this product is called TURY App and can be downloaded for free
from the Play Store or Apple Store. Through TURY App, available for Android and IOS,
you can control all functions of the FAST. To use this app please refer to the
instructions and video tutorials available in the app.
3.1 DOWNLOAD
3.2 INITIAL SETTINGS
Click on the links below or view the QR Code with your
smartphone camera to download the application.
1st step
App Store
Available on the Available on the
2nd step 3rd step 4th step
9
www.tury.com.br
3.3 PAIRING
There are two ways to enable the pairing of the product, applying 3x clicks on the FAST
/ BLUETURY module button or using a 4-digit password directly in the TURY APP as
indicated below.
TURY APP automatically detects the pairing version of FAST and directs the correct
screen for each case as shown in the video below.
The product's original password is "0101" and we recommend changing it for security in
MENU/SETTINGS/USER AND PASSWORD to prevent anyone from being able to pair
without your permission.
For security, only smartphones paired with BLUETURY-FAST will be able to use the
TURY APP.
In order to pair the FAST product with the ANDROID or IOS Smartphone, it is necessary
to activate the BLUETOOTH module, and in the ANDROID system it is necessary to allow
and activate the LOCATION system of the device.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
