TV One 1T-CT-400 Series Bedienungsanleitung

Instruction Manual

1T-CT-400 Series

Cat.5 Extenders

Table of Contents

1.0 Introduction 2

2.0 Specifications 3

3.0 Checking Package Contents 6

4.0 Connecting The Hardware 6

5.0 Operating The Unit 9

6.0 Troubleshooting 10

7.0 Limited Warranty 11

8.0 Regulatory Compliance 11

9.0 Contact Information 12

1.0 INTRODUCTION

Thanks for purchasing this Cat.5 Extender Product from TV One. This Product line is

designed to transport VGA and YPbPr signals over great distances using CAT.5/5E or

CAT.6 premium grade network cables. Our professional video conversion products

have been serving the industry for over twenty years. TV One offers a full line of high

quality Seamless Switchers, Video Scalers, Up/Down/Cross Converters, Analog-Digital

Converters (SD/HD-SDI, HDMI, DVI), Format Converters, Standards Converters,

TBC/Frame Synchronizers, Matrix Routing Switchers, Signal Distribution Amplifiers and

Cat.5 Transmission Systems.

1.1 Liability Statement

Every effort has been made to ensure that this product is free of errors. TV One cannot

be held liable for the use of this hardware or any direct or indirect consequential

damages arising from its use. It is the responsibility of the user of the hardware to check

that it is suitable for his/her requirements and that it is installed correctly. All rights

reserved. No parts of this manual may be reproduced or transmitted by any form or

means electronic or mechanical, including photocopying, recording or by any

information storage or retrieval system without the written consent of the publisher.

TV One reserves the right to revise any of its hardware and software following its policy

to modify and/or improve its products where necessary or desirable. This statement

does not affect the legal rights of the user in any way.

All third party trademarks and copyrights are recognized. The TV One logo, TV One-

task and CORIO are the registered Trademarks of TV One. All other trademarks are the

property of their respective holders.

1.2 Features

The CAT.5 VGA Extender product line has many features that enable it to perform in a

superior manner. Among those features you will find:

•Transmit PC or Component Video content via Cat.5/5E or 6 Cable

•Resolutions to 1920x1200, 1080p @ 60Hz

•Range up to 300 meters (1000’)

•Gain and equalization adjustments at each receiver

•Some models with built-in Skew Correction adjustment

•Some models with Analog Stereo and S/PDIF Digital Audio

•One receiver model featuring built-in UTP Repeater

1.2 Transmitter Features and Compatibility Chart

Transmitter

Model Signal

Type Stereo

Audio Maximum

Distance Cat.5

Out Compatible

Receivers

1T-CT-441 RGBHV None 300M (1000’) 1 442, 444

1T-CT-443 RGBHV Yes (1) 300M (1000’) 1 442, 444, 452, 456

1T-CT-453 YPbPr Yes (1) 300M (1000’) 1 464

1T-CT-467 RGBHV Yes 300M (1000’) 8 442, 444, 452, 456

C2-1250/1250 (2) RGBHV/YPbPr No 300M (1000’) 1 442, 444, 464

Notes: (1) These models have both Analog Stereo and S/PDIF Digital Inputs.

(2) Models C2-1200 and C2-1250 are covered in a separate manual.

1.3 Receiver Features and Compatibility Chart

Receiver

Model Signal

Type Stereo

Audio Maximum

Distance Built-in

Skew Comp Compatible

Transmitters

1T-CT-442 RGBHV None 150M (500’) No 441, 443, 467,

C2-1200/1250

1T-CT-444 RGBHV None 300M (1000’) Yes 441, 443, 467,

C2-1200/1250

1T-CT-452 RGBHV Yes (1) 150M (500’) No 443, 467

1T-CT-456 (2) RGBHV Yes (1) 300M (1000’) Yes 443, 467

1T-CT-464 YPbPr Yes (1) 300M (1000’) No 453, C2-1200/1250

Notes: (1) These models have both Analog Stereo and S/PDIF Digital Audio Outputs.

(2) This model has a built-in UTP Repeater to drive another Receiver at up to 1000’.

2.0 SPECIFICATIONS

2.1 General

Environmental

Operating Temperature 0° to +70° C (+32° to +158° F)

Operating Humidity 10% to 90%, Non-condensing

Storage Temperature -40° to +70° C (-40° to +158° F)

Storage Humidity 10% to 90%, Non-condensing

Warranty

Limited Warranty 2 Years Parts and Labor

Regulatory Approvals

Encoder/Decoder Unit FCC, CE, RoHS

Power Supply UL, CUL, CE, PSE, GS, RoHS

Cable Requirements

CAT.5/5E or CAT 6 Network Grade, Premium Cables

Power Requirement

All models except 1T-CT-467 External Power Supply +5 VDC@2A, Locking DC

1T-CT-467 Internal Power Supply 100-240VAC@ 50-60Hz

Accessories Included

1x Power Adapter US, UK or Euro (except 1T-CT-467)

1x User Manual CAT.5 Extender Series

2.2 Transmitters

Video Inputs

1T-CT-441, 443, 467 1x RGBHV via HD-15

1T-CT-453 1x YPbPr via 3x RCA

Video Outputs

1T-CT-441, 443, 467 1x RGBHV via HD-15

Audio Inputs

1T-CT-441 None

1T-CT-467 1x Analog Stereo via 3.5mm

1T-CT-443, 453 1x Analog Stereo via 3.5mm, 1x S/PDIF via Toslink

Audio Outputs

1T-CT-441 None

1T-CT-443, 453, 467 1x Analog Stereo via 3.5mm Mini Stereo

UTP Outputs

1T-CT-441, 443, 453 1x via RJ-45 Connector

Video Performance

Maximum Resolutions Up to 1920x1200, 1080p / 60Hz

Video Bandwidth 350MHz

Input Signal Levels Video 0.75mV, Sync 5V TTL

Horizontal Freq Range 15-70KHz

Vertical Freq Range 30-170Hz

Audio Performance

Input Sampling Rates 32, 44.1, 48, 96KHz

Maximum Range

All Models Up to 300M (1000’), depending upon Receiver selected

Mechanical (H-W-D)

1T-CT-441, 443, 453 88x141x32mm (1.26”x5.5”x3.5”)

1T-CT-467 44x213x134mm (1.75x8.4x5.3”)

Weight

1T-CT-441, 443, 453 240g (0.53 lbs)

1T-CT-467 860g (1.9 lbs)

Model Numbers

1T-CT-441 Transmitter for RGBHV

1T-CT-443 Transmitter for RGBHV and Stereo

1T-CT-453 Transmitter for YPbPr and Stereo

1T-CT-467 Transmitter for RGBHV with 8x UTP Outputs

Optional Accessories

RM-370T Rackmount 3 units – 1T-CT-441, 443, 453

RM-360S Rackmount 1 unit – 1T-T-467

Notes

(1) TV One Model C2-1200 and C2-1250 Video Switcher/Scalers have built in UTP

transmitters capable of sending RGBHV or YPbPr format signals up to 1000’. Check

the Spec Sheets for those products for full details. These units are compatible with

UTP Receiver models 1T-CT-442, 444, 464.

2.2 Receivers

UTP Inputs

All Receiver Models 1x via RJ-45 Connector

UTP Outputs

1T-CT-456 1x via RJ-45 Connector for Cat.5 Repeater function

Video Outputs

1T-CT-442, 444, 452, 456 1x RGBHV via HD-15

1T-CT-464 1x YPbPr via 3x RCA

Audio Outputs

1T-CT-442, 444 None

1T-CT-452, 456, 464 1x SPDIF via Toslink and 1x Analog via 3.5mm Mini St.

Video Performance

Maximum Resolutions Up to 1920x1200, 1080p / 60Hz

Video Bandwidth 350MHz

Output Signal Levels Video 0.75mV, Sync 5V TTL

Horizontal Freq Range 15-70KHz

Vertical Freq Range 30-170Hz

Audio Performance

Output Sampling Rate 32KHz

Maximum Range

1T-CT-442, 452 150M (500’) for RGBHV Output

1T-CT-444, 456 300M (1000’) for RGBHV Output

1T-CT-464 300M (1000’) for YPbPr Output

Signal Adjustments

All Receiver Models Equalization and Gain

1T-CT-444, 456 R-G-B Skew Compensation in 32 steps per color

Mechanical (H-W-D)

All models 89x141x32mm (1.26”x5.5”x3.5”)

Weight

All Models 240g (0.53 lbs)

Model Numbers

1T-CT-442 Receiver for RGBHV to150M

1T-CT-444 Receiver for RGBHV to 300M

1T-CT-452 Receiver for RGBHV to 150M with Stereo

1T-CT-456 Receiver for RGBHV to 300M with Stereo, UTP Repeater

1T-CT-464 Receiver for YPbPr to 300M with Stereo

Optional Accessories

RM-370T Rackmount 3 units – All Receiver Models

3.0 CHECKING PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make certain the

following items are contained in the shipping carton:

•1x Transmitter or Receiver unit

•1x Power Adapter (except 1T-CT-467)

•1x AC Power Cord (1T-CT-467 only)

•1x Operations Manual

Note: Please retain the original packing material should the need ever arise to return

the unit. If you find any items are missing, contact your reseller or TV One immediately.

Have the Model and Serial Number and Invoice available for reference when you call.

4.0 CONNECTING THE HARDWARE

Please study the panel drawings below and become familiar with the signal input,

outputs, power requirements/inputs plus any controls present. Note: Each product has

somewhat different capabilities and therefore different cable connections are present.

Locate the drawing for the item(s) you have purchased and become familiar with the

connectors used in that product. The resolution capability of the remotely located

display devices must be capable of displaying the output of the source device. Before

connecting the CAT.5 extender system, verify that the display device on the receiving

end can support the output resolution and signal format by connecting it directly to the

source device.

4.1 Cat.5/5E/6 Cable Notes

Pins and pairing. Make sure the CAT5/5E/6 cable pin assignments are standard. The

correct pairing is straight through pin-to-pin, with pairing as follows.

Twist density. UTP cable pairs have different twist densities (twist pitches). There are

two pairs with high density twist and two pairs with low density. Colors vary by

manufacturer. Twist densities can be seen by stripping off about 10 cm (4’) of insulation

and visually inspecting. Pairs 1-2 and 7-8 should be assigned to high density twists.

Failure to assign correct twist densities can result in image jitter. The ABCD picture

shows typical UTP cable, with pairs A and C showing a high pitch twist (assign (assign

to pin pairs 1-2 & 7- 8), and B and D with low pitch twist (assign to pin pairs 3-6 & 4-5).

4.2 1T-CT-400 Series Transmitters

1. Connect the source device’s video output to the VIDEO IN connector of the

Transmitter, using the appropriate cable. All models except the 1T-CT-453 have

a VIDEO OUT connector that can provide a loop-thru signal to a local monitor.

2. All Transmitter models, except the 1T-CT-441, have audio capability. Connect

either the source device’s analog stereo or S/PDIF audio output to the either the

STEREO IN connector or the S/PDIF IN connector of the Transmitter (1T-CT-467

does not have S/PDIF in). Do not connect both as this will result in interference

between the two. The system is designed to support either audio format, but not

both at the same time. The audio output of the Transmitter can provide an

analog stereo signal for local monitor. If a S/PDIF input is used, this will be

converted to analog stereo for this purpose.

3. Connect a Cat.5/5E or Cat.6 cable to the UTP OUT connector of the Transmitter.

Model 1T-CT-467 has 8 UTP Outputs. All Transmitter models support up to 300

meters (1,000’) of CAT.5/5E or CAT.6 premium grade network cables as

described in 4.1 above. Model 1T-CT-467 has 8 UTP Outputs. The Receiver

model determines the maximum distance of either 150 meters (500’) or 300

meters (1,000’) of the cable as cam be determined by checking section 4.3

below.

Note – In addition to these three Transmitter models mentioned about, TV One

Models C2-1200 and C2-1250 Video Switcher/Scalers have built-in UTP transmitters

capable of sending either RGBHV or YPbPr format signals (without audio) up to

1000 feet. Consult the manual for those units when they are being used.

4.2 1T-CT-400 Series Receivers

1. At the remote location, connect the other end of the Cat.5/5E or Cat.6 cable to

the UTP IN connector of the Receiver.

2. Connect the VIDEO OUT connector of the Receiver to the video input of the

remote display or other device, using the appropriate cable.

3. If the Transmitter and Receiver models chosen have audio capability, connect

the Receiver’s STEREO OUT and/or S/PDIF OUT connectors to remote display

or other audio device. Both audio outputs may be used simultaneously,

regardless of the audio signal format chosen at the transmitter.

4. Connect the supplied AC adapters first to the respective Transmitter and

Receiver and then to the AC sockets.

5. Lastly, turn on the source device and remote display. The source signal should

now appear on the remotely located display. If not, consult the Troubleshooting

section of this manual.

Andere Handbücher für 1T-CT-400 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TV One Extender Handbücher

TV One

TV One Magenta HD-One DX500 Bedienungsanleitung

TV One

TV One 1T-CT-690 Series Bedienungsanleitung

TV One

TV One 1T-CT-521 Bedienungsanleitung

TV One

TV One 1T-CT-620 Series Bedienungsanleitung

TV One

TV One Voyager USB Bedienungsanleitung

TV One

TV One 1T-FC-677 Bedienungsanleitung

TV One

TV One Voyager Bedienungsanleitung

TV One

TV One 1T-CT-690 Series Bedienungsanleitung

TV One

TV One 1T-CT-620 Series Bedienungsanleitung

TV One

TV One Magenta HD-One DX Bedienungsanleitung

TV One

TV One 1T-CT-690 Series Bedienungsanleitung

TV One

TV One 1T-CT-570 Series Bedienungsanleitung

TV One

TV One 1T-CT-420 Series Bedienungsanleitung

TV One

TV One 1T-CT-520 Series Bedienungsanleitung

TV One

TV One 1T-CT-400 series Bedienungsanleitung

TV One

TV One 1T-CT-400 Series Bedienungsanleitung

TV One

TV One 1T-VGA-CAT Bedienungsanleitung

TV One

TV One 1T-CT-445 Bedienungsanleitung

TV One

TV One 1T-DA-631 Bedienungsanleitung

TV One

TV One 1T-CT-631A Bedienungsanleitung

TV One

TV One 1T-FC-677 Bedienungsanleitung

TV One

TV One 1T-CT-420 Series Bedienungsanleitung

TV One

TV One 1T-VGA-CAT Bedienungsanleitung

TV One

TV One 1T-CT-680 Series Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung