TwinMOS Booming Bedienungsanleitung
TwinMOS Booming
802.11b
Wireless Router
User’s Manual
TwinMOS®
Wireless Router
TwinMOS Page 1
Contents
PACKAGE CONTENTS……........................................................2
INTRODUCTION..........................................................................3
DESCRIPTION OF HARDWARE..........................................................4
BASIC INSTALLATION PROCEDURE……….…………………………..……..6
CONNECTING THE AP ROUTER………..............................................…..9
WEB MANAGEMENT SETTINGS.....................................................…..13
TROUBLESHOOTING....................................................…..27
GLOSSARY…................................................................................................…..29
TECHNICAL SPECIFICATIONS.......................................…..33
FCC CAUTION ................…………………………………………………..........…..34
Wireless Router
TwinMOS Page 2
PACKAGE CONTENTS
Unpack your Booming AP Router kit and verify that all items are present.
Booming Wireless Router
User’s Manual (on CD)
Power Adapter (7.5V/1.1A)
Antenna
If any of the items described appear to be damaged or missing, please contact your reseller.
Wireless Router
TwinMOS Page 3
INTRODUCTION
Thank you for purchasing the Wireless Router. The Wireless Router is an ideal broadband sharing
solution for SOHO and home networks, featuring a wireless LAN function that reduces the
necessity of connecting stations via a wired LAN.
The Wireless Router manages all IP address assignments by DHCP, relieving users of the necessity
of manually configuring clients for inter-client communication and access to the Internet. A built-in
firewall provides extra security from malicious attack.
The intuitive Web browser interface enables users to configure all aspects of the router, including
making LAN, WAN, and WLAN settings, making access restrictions, setting administrative and
user passwords.
This Booming Wireless Router supports following features：
Compatible with IEEE 802.11b Direct Sequence high data rate specifications.
Supports high-speed wireless connections up to 11 Mbps
Easy setup through a Web browser on any operating system that supports TCP/IP.
10 Mbps WAN port connection to xDSL/Cable modem.
Four 10/100 Mbps Ethernet switch ports.
DHCP for dynamic IP configuration, and DNS for domain name mapping.
64/128-bit Wired Equivalent Privacy (WEP) data encryption.
Web-based firmware upgrade
Wireless Router
TwinMOS Page 4
Description of Hardware
Front Panel
The front panel provides LED’s for device status. Refer to the following table for the meaning of each
feature. LED State Color Meaning
On Green The device is receiving power.
Power Off ━The device is not receiving power.
WLAN Link On Green Indicates that the device is connected to WLAN.
On Red Indicates WLAN status.
WLAN Tx/Rx Blinking Red Indicates WLAN traffic.
10/100 On Red Indicates link speed(10/100 Mbps)
On Green Link is established.
On Flashing Green Packet transmit or receive activity.
Act
Off ━No link activity.
Wireless Router
TwinMOS Page 5
Rear Panel
Item Description
LAN ports The four RJ-45 Ethernet ports allow you to con-nect client PCs or LAN
hubs to the Wireless Router.
WAN port WAN port (RJ-45). Connect your Cable modem, xDSL modem, or an
Ethernet router to this port.
Power port Connect the included power adapter to this inlet.
Warning: The included power adapter is DC 7.5V/1.1A. Using the
wrong type of power adapter may cause damage.
Antenna Two antennas provide wireless LAN functionality and ensure optimal
signal strength.
Reset button(Side) Use this button to reset the power and restore the default factory
settings by pressing this button for five seconds.
Wireless Router
TwinMOS Page 6
Basic Installation Procedure
Connecting the Router to the LAN
You can connect the WLAN 11b Router to your PC, a hub, or a switch. Run the Ethernet cable from one
of the LAN ports on the rear of the WLAN 11b Router to your computer’s network adapter or to another
network device. You can also connect the WLAN 11b Router to your PC or to a client adapter via radio
signals. Position one antenna on the back of the WLAN 11b Router into the desired positions.
Connecting the Router to the WAN
Prepare an Ethernet cable for connecting the WLAN 11b Router to a Cable/xDSL modem or Ethernet
router.
Wireless Router
TwinMOS Page 7
Internal
xDSL/Cable modem
Power On
Connect the power adapter to the WLAN 11b Router.
SOHO/Home Networking
WAN
Wireless Router
TwinMOS Page 8
Wireless
Office Networking
LAN
Wireless Router
TwinMOS Page 9
CONNECTING THE AP ROUTER
Follow the procedure below to connect the AP Router.
LAN connecting
Plug a Ethernet cable into a free LAN port at the rear of the router. Plug the other end of the
cable into the RJ-45 port on your computer.
Turn on power supply for AP Router.
Setting TCP/IP to work with the AP Router.
Windows XP
1. Click Start, Settings, then click Control Panel. The Control Panel opens:
2.
Right-click the Network icon and select Open to open the Network Connections dialog:
Andere Handbücher für Booming
1
Inhaltsverzeichnis
