Tyco Fire Product CENTRAL ESFR-1 Bedienungsanleitung

General

Description

The Model ESFR-1 Sprinklers (Ref.

Figure 1) are “Early Suppression Fast

Response Sprinklers” having a nomi-

nal K-factor of 14.0. They are suppres-

sion mode sprinklers, and their use is

especially advantageous as a means

of eliminating the use of in-rack sprin-

klers, when protecting high-piled stor-

age.

TheModelESFR-1isprimarilyde-

signed for use with storage of most

encapsulated or non-encapsulated

common materials including cartoned

unexpanded plastics to 35 ft. (10,7 m)

high. In addition, the protection of

some storage arrangements of roll pa-

per and rubber tires can be consid-

ered.

Applications for the Model ESFR-1

Sprinklers are expanding beyond the

current recognized installation stand-

ards. For information regarding re-

search fire tests that may be accept-

able to an Authority Having

Jurisdiction (e.g., flammable liquids,

aerosols, etc.), please contact the

Technical Services Department.

WARNINGS

The Model ESFR-1 Sprinklers de-

scribed herein must be installed and

maintained in compliance with this

document, as well as with the applica-

ble standards of the National Fire Pro-

tection Association, in addition to the

standards of any other authorities hav-

ing jurisdiction (e.g., FM Global). Fail-

ure to do so may impair the integrity of

these devices.

The owner is responsible for maintain-

ing their fire protection system and de-

vices in proper operating condition.

The installing contractor or sprinkler

manufacturer should be contacted

relative to any questions.

Sprinkler

Identification

Numbers

SIN TY6226 - (Pendent K=14.0)

TY6226 ia a redesignation for C6226,

G8440, aand S8000.

Technical

Data

Approvals

UL and ULC Listed.

FM and LPC Approved.

(UL and ULC Listings, as well as FM

Approvals, only apply to the service

conditions indicated in the Design Cri-

teria section.)

NYC under MEA 356-01-E.

VdS Approved; however, the use of the

ESFR-1 is required to be agreed upon

by the VdS for each application.

Maximum Working Pressure

175 psi (12,1 bar)

Pipe Thread Connection

3/4 inch NPT or ISO 7-R3/4

Discharge Coefficient

K = 14.0 GPM/psi1/2

(201,6 LPM/bar1/2)

Temperature Ratings

165°F/74°C or 214°F/101°C

Finish

Natural Brass

Physical Characteristics

Frame ............. Brass

Deflector............Bronze

Compression Screw . . . . . . . . .

............ StainlessSteel

Hook.............. Monel

Strut.............. Monel

Link Assembly . . . . Solder, Nickel

Button .............Bronze

SealingAssembly...........

. . . . . . Beryllium Nickel w/Teflon*

EjectionSpring ........Inconel

Patents

U.S.A. Patent Numbers 4,580,729

and 4,893,679 may be applicable to

the Model ESFR-1. Other patents are

pending.

Page 1 of 4 TFP318

FEBRUARY, 2002

Model ESFR-1

Early Suppression Fast Response Pendent Sprinklers

14.0 K-factor

Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500

Customer Service/Sales:

Tel: (215) 362-0700 / (800) 523-6512

Fax: (215) 362-5385

TFP318 (3-2.2)

OBSOLETE

Operation

The fusible link assembly is comprised

of two link halves that are joined to-

gether by a thin layer of solder. When

the rated temperature is reached, the

solder melts and the two link halves

separate activating the sprinkler and

flowing water.

Design

Criteria

UL AND C-UL LISTING CRITERIA

The Model ESFR-1 (SIN TY6226)

Sprinklers are UL and C-UL Listed as

“Early Suppression Fast Response

Sprinklers” for installation per NFPA 13

or other applicable NFPA standards up

to a maximum ceiling height of 40 ft.

(12,2 m).

FM APPROVAL CRITERIA

The Model ESFR-1 (SIN TY6226)

Sprinklers are FM Approved as “Early

Suppression Fast Response Sprin-

klers” for installation per the applicable

FM Loss Prevention Data Sheets up to

a maximum ceiling height of 45 ft.

(13,7 m).

Installation

The Model ESFR-1 Pendent Sprin-

klers are to be installed in accordance

with the following instructions:

NOTE

Damage to the fusible Link Assembly

during installation can be avoided by

handling the sprinkler by the frame

arms only (i.e., do not apply pressure

to the fusible Link Assembly), and by

using the appropriate sprinkler

wrench. Damaged sprinklers must be

replaced.

A leak tight 3/4 inch NPT sprinkler joint

should be obtained with a torque of 10

to 20 ft.lbs. (13,4 to 26,8 Nm). Higher

levels of torque may distort the sprin-

kler inlet with consequent leakage or

impairment of the sprinkler.

Step 1. The ESFR-1 Sprinkler must be

installed in the pendent position.

Step 2. With pipe thread sealant ap-

plied, hand tighten the sprinkler into

the sprinkler fitting. Do not apply pres-

sure to the Link Assembly, and handle

the ESFR-1 Sprinkler by the Frame

arms only.

Step 3. Wrench tighten the ESFR-1

Sprinkler using only the W-Type 2

Sprinkler Wrench (Ref. Figure 2) and

by fully engaging (seating) the wrench

on the sprinkler wrench flats.

Step 4. After installation, inspect the

Link Assembly of each ESFR-1 Sprin-

kler for damage. In particular, verify

that the Link Assembly and Hook are

positioned as illustrated in Figure 1,

and that the Link Assembly has not

Page2of4 TFP318

1-Frame

2-Deflector

3-Compression Screw

4-Hook

5-Strut

6-Link Assembly

7-Button

8-Gasketed Spring Plate

9-Ejection Spring

FIGURE 1, MODEL ESFR-1 EARLY SUPPRESSION FAST RESPONSE PENDENT SPRINKLER

* Registered Trademark of DuPont

OBSOLETE

been bent, creased, or forced out of its

normal position in any way.

Damaged sprinklers must be replaced.

Care and

Maintenance

The Model ESFR-1 must be main-

tained and serviced in accordance

with the following instructions:

NOTE

Before closing a fire protection system

main control valve for maintenance

work on the fire protection system that

it controls, permission to shut down the

affected fire protection systems must

be obtained from the proper authori-

ties and all personnel who may be

affected by this action must be notified.

Sprinklers that are found to be leaking

or exhibiting visible signs of corrosion

must be replaced.

Automatic sprinklers must never be

shipped or stored where their tempera-

ture will exceed 100°F/38°C and they

must never be painted, plated, coated,

or otherwise altered after leaving the

factory. Modified or over-heated sprin-

klers must be replaced.

Care must be exercised to avoid dam-

age - before, during, and after instal-

lation. Sprinklers damaged by drop-

ping, striking, wrench twist/slippage,

or the like, must be replaced.

The owner is responsible for the in-

spection, testing, and maintenance of

their fire protection system and de-

vices in compliance with this docu-

ment, as well as with the applicable

standards of the National Fire Protec-

tion Association (e.g., NFPA 25), in

addition to the standards of any other

authorities having jurisdiction. The in-

stalling contractor or sprinkler manu-

facturer should be contacted relative to

any questions.

It is recommended that automatic

sprinkler systems be inspected,

tested, and maintained by a qualified

Inspection Service.

Limited

Warranty

Products manufactured by Tyco Fire

Products are warranted solely to the

original Buyer for ten (10) years

against defects in material and work-

manship when paid for and properly

installed and maintained under normal

use and service. This warranty will ex-

pire ten (10) years from date of ship-

ment by Tyco Fire Products. No war-

ranty is given for products or

components manufactured by compa-

nies not affiliated by ownership with

Tyco Fire Products or for products and

components which have been subject

to misuse, improper installation, corro-

sion, or which have not been installed,

maintained, modified or repaired in ac-

cordance with applicable Standards of

the National Fire Protection Associa-

tion, and/or the standards of any other

Authorities Having Jurisdiction. Mate-

rials found by Tyco Fire Products to be

defective shall be either repaired or

replaced, at Tyco Fire Products’ sole

option. Tyco Fire Products neither as-

sumes, nor authorizes any person to

assume for it, any other obligation in

connection with the sale of products or

parts of products. Tyco Fire Products

shall not be responsible for sprinkler

system design errors or inaccurate or

incomplete information supplied by

Buyer or Buyer’s representatives.

IN NO EVENT SHALL TYCO FIRE

PRODUCTS BE LIABLE, IN CON-

TRACT, TORT, STRICT LIABILITY OR

UNDER ANY OTHER LEGAL THE-

ORY, FOR INCIDENTAL, INDIRECT,

SPECIAL OR CONSEQUENTIAL

DAMAGES, INCLUDING BUT NOT

LIMITED TO LABOR CHARGES, RE-

GARDLESS OF WHETHER TYCO

FIRE PRODUCTS WAS INFORMED

ABOUT THE POSSIBILITY OF SUCH

DAMAGES,ANDINNOEVENT

SHALL TYCO FIRE PRODUCTS’ LI-

ABILITY EXCEED AN AMOUNT

EQUAL TO THE SALES PRICE.

THE FOREGOING WARRANTY IS

MADE IN LIEU OF ANY AND ALL

OTHER WARRANTIES EXPRESS OR

IMPLIED, INCLUDING WARRANTIES

OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PUR-

POSE.

TFP318 Page 3 of 4

FIGURE 2

W-TYPE 2

SPRINKLER WRENCH

"FITTING SIDE"

FITTING

TOWARDS SPRINKLER

RECESS

WRENCH

OBSOLETE

Ordering

Procedure

When placing an order, indicate the full

product name. Please specify the

Sprinkler Identification Number (SIN),

quantity, and temperature rating. Refer

to the Price List for complete listing of

Part Numbers.

Contact your local distributor for avail-

ability.

Sprinkler Assemblies with NPT

Thread Connections:

Specify: (specify temperature rating),

natural brass, TY6226 Pendent Sprin-

kler, PSN (specify).

165°F/74°C . . . . . . . . . . . . . . . P/N 58-440-1-165

214°F/101°C . . . . . . . . . . . . . . P/N 58-440-1-214

Sprinkler Wrench

Specify: W-Type 2 Sprinkler Wrench,

P/N 56-872-1-001.

Page4of4 TFP318

TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446

OBSOLETE

Andere Tyco Fire Product Bewässerungssystem Handbücher

Tyco Fire Product

Tyco Fire Product CENTRAL Attic BB1-17/32 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem RFII Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Luminous S176 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL Royal Flush A Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Celeste S140 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL EC-25 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Mizar S210 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star SG S180 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F938 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ESFR-25 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Luminous S178 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star SuperNova S124 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product STAR SIN S3400 SR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star SG300 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product RAPID RESPONSE LFII Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL H Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A-1 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL BVR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL BV-EC Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F898 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Pulsar S160 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL TY-B Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star S190 Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Reliable

Reliable F1-300 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

Reliable

Reliable F4FR Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Reliable

Reliable F1FR42 Series Bedienungsanleitung

Reliable

Reliable F1FR-300 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung